ARM: OMAP4: Convert to ti_armv7_common.h

Update omap4_common.h to use ti_armv7_common.h

Testing:
* Boot tested on OMAP4430 ES2.1 OMAP4460 ES1.1 SDP, OMAP4 PANDA/PANDA ES
* Verified ./MAKEALL -s omap

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

1 files changed, 27 insertions, 161 deletions

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index e9f2383..ea56eeb 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -15,82 +15,61 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP44XX		1	/* which is a 44XX */
 #define CONFIG_OMAP4430		1	/* which is in a 4430 */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+#define CONFIG_SYS_THUMB_BUILD
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310		1
+#define CONFIG_SYS_PL310_BASE	0x48242000
+#endif
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
 #include <asm/arch/omap.h>
 
-/* Display CPU and Board Info */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE		GPT2_BASE
 
 /*
- * Size of malloc() pool
  * Total Size Environment - 128k
- * Malloc - add 256k
  */
 #define CONFIG_ENV_SIZE			(128 << 10)
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
-/* Vector Base */
-#define CONFIG_SYS_CA9_VECTOR_BASE	SRAM_ROM_VECT_BASE
 
 /*
- * Hardware drivers
+ * For the DDR timing information we can either dynamically determine
+ * the timings to use or use pre-determined timings (based on using the
+ * dynamic method.  Default to the static timing infomation.
  */
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#include <configs/ti_armv7_common.h>
 
 /*
- * serial port - NS16550 compatible
+ * Hardware drivers
  */
-#define V_NS16550_CLK			48000000
-
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+#define CONFIG_SYS_NS16550_CLK		48000000
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
 
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-
-/* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-/* I2C  */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-#define CONFIG_I2C_MULTI_BUS		1
-
 /* TWL6030 */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_TWL6030_POWER		1
 #endif
 
-/* MMC */
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1
@@ -100,36 +79,13 @@
 #define CONFIG_USB_TTY			1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 
-/* Flash */
-#define CONFIG_SYS_NO_FLASH	1
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-/* Enabled commands */
-#define CONFIG_CMD_EXT2		/* EXT2 Support                 */
-#define CONFIG_CMD_FAT		/* FAT support                  */
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support                  */
-
-/* Disabled commands */
+/* Per-Soc commands */
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
-#undef CONFIG_CMD_IMLS		/* List all found images        */
 
 /*
  * Environment setup
  */
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-
-#define CONFIG_ENV_OVERWRITE
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyO2,115200n8\0" \
@@ -192,100 +148,10 @@
 		"fi; " \
 	"fi"
 
-#define CONFIG_AUTO_COMPLETE		1
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE		512
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-/*
- * memtest setup
- */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (32 << 20))
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR		0x80000000
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT2_BASE
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
-
-/*
- * SDRAM Memory Map
- * Even though we use two CS all the memory
- * is mapped to one contiguous block
- */
-#define CONFIG_NR_DRAM_BANKS	1
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310		1
-#define CONFIG_SYS_PL310_BASE	0x48242000
-#endif
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/* Defines for SDRAM init */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
 /* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40304350
 #define CONFIG_SPL_MAX_SIZE		(38 * 1024)
-#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
 #define CONFIG_SPL_DISPLAY_PRINT
-
-/*
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 80E7FFC0--0x80E80000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80E80000
-
-/*
- * BSS and malloc area 64MB into memory to allow enough
- * space for the kernel at the beginning of memory
- */
-#define CONFIG_SPL_BSS_START_ADDR	0x84000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-#define CONFIG_SYS_THUMB_BUILD
-
 #endif /* __CONFIG_OMAP4_COMMON_H */