summaryrefslogtreecommitdiff
path: root/include/configs/omap2420h4.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2005-01-12 00:15:14 +0000
committerwdenk <wdenk>2005-01-12 00:15:14 +0000
commit289f932c5ff628bf21a05073243071a01a2d3b02 (patch)
treeadfa2abf61660375c7d3609b100f18f1b30dde90 /include/configs/omap2420h4.h
parent082acfd4849d2f0471b0709fe7f5ce1de387437d (diff)
downloadu-boot-imx-289f932c5ff628bf21a05073243071a01a2d3b02.zip
u-boot-imx-289f932c5ff628bf21a05073243071a01a2d3b02.tar.gz
u-boot-imx-289f932c5ff628bf21a05073243071a01a2d3b02.tar.bz2
* Some Cleanup.
* Patch by Richard Woodruff, 10 Jan 2005: Update support for OMAP2420 (ARM11) and H4 board: o clean up and add new types to H4 memory probe code. o fix to work with internal boot. o added PRCM config III operation. o fix marginal flash timings. o add revison ATAG usage. o enable voltage scaling at power chip. o fix compile error for i2c. * Fix network problem (error when receiving multiple ARP packets)
Diffstat (limited to 'include/configs/omap2420h4.h')
-rw-r--r--include/configs/omap2420h4.h73
1 files changed, 67 insertions, 6 deletions
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index da68c1c..8516054 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -38,11 +38,20 @@
/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */
/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
-#define PRCM_CONFIG_II 1
-#define CONFIG_PARTIAL_SRAM 1
+/* Clock config to target*/
+#define PRCM_CONFIG_II 1
+//#define PRCM_CONFIG_III 1
+
+/* Memory configuration on board */
+//#define CONFIG_OPTIMIZE_DDR 1
#include <asm/arch/omap2420.h> /* get chip and board defs */
+/* On H4, NOR and NAND flash are mutual exclusive.
+ Define this if you want to use NAND
+ */
+//#define CFG_NAND_BOOT
+
#ifdef CONFIG_APTIX
#define V_SCLK 1500000
#else
@@ -59,6 +68,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
/*
* Size of malloc() pool
@@ -112,8 +122,11 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C)
-
+#ifdef CFG_NAND_BOOT
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2)
+#endif
/* I'd like to get to these. Snap kernel loads if we make MMC go */
/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) */
@@ -122,6 +135,43 @@
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+/*
+ * Board NAND Info.
+ */
+#define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/
+
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define SECTORSIZE 512
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0)
+#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0)
+#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0)
+#define READ_NAND(adr) (*(volatile u16 *)0x6800A084)
+#define NAND_WAIT_READY(nand) udelay(10)
+
+#define NAND_NO_RB 1
+
+#define CFG_NAND_WP
+#define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
+#define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
+
+
+#define NAND_CTL_CLRALE(nandptr)
+#define NAND_CTL_SETALE(nandptr)
+#define NAND_CTL_CLRCLE(nandptr)
+#define NAND_CTL_SETCLE(nandptr)
+#define NAND_DISABLE_CE(nand)
+#define NAND_ENABLE_CE(nand)
+
+
#define CONFIG_BOOTDELAY 3
#ifdef NFS_BOOT_DEFAULTS
@@ -203,11 +253,22 @@
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
+#ifdef CFG_NAND_BOOT
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x80000 /* environment starts here */
+#else
#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K)
#define CFG_ENV_IS_IN_FLASH 1
+#endif
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (10*75*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (10*75*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Write */
+
+/* Flash banks JFFS2 should use */
+#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE)
+#define CFG_JFFS2_MEM_NAND
+#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */
+#define CFG_JFFS2_NUM_BANKS 1
#endif /* __CONFIG_H */