Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 33 insertions, 33 deletions

diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index 74bba05..e2a6360 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -51,8 +51,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -64,11 +64,11 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK	(48000000)		/* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK	(48000000)		/* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart */
 
 /*
  * select serial console configuration
@@ -79,7 +79,7 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE	115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -104,7 +104,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS	"console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=dhcp"
 #define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
-#define CFG_AUTOLOAD            "n"             /* No autoload */
+#define CONFIG_SYS_AUTOLOAD            "n"             /* No autoload */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
@@ -114,27 +114,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory */
-#define CFG_PROMPT	"OMAP1610 H2 # "	/* Monitor Command Prompt */
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"OMAP1610 H2 # "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x10000000	/* memtest works on */
-#define CFG_MEMTEST_END	0x12000000	/* 32 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END	0x12000000	/* 32 MB in DRAM */
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	0x10000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x10000000	/* default load address */
 
 /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
  * DPLL1. This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE	0xFFFEC500	/* use timer 1 */
-#define CFG_PVT	7	/* 2^(pvt+1), divide by 256 */
-#define CFG_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
+#define CONFIG_SYS_PVT	7	/* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -162,33 +162,33 @@
 #ifndef __ASSEMBLY__
 extern unsigned long omap_flash_base;		/* set in flash__init */
 #endif
-#define CFG_FLASH_BASE		omap_flash_base
+#define CONFIG_SYS_FLASH_BASE		omap_flash_base
 
 #elif defined(CONFIG_CS0_BOOT)
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1_BM0
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1_BM0
 
 #else
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1_BM1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1_BM1
 
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
-#define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
 /* addr of environment */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x020000)
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET	0x20000	/* environment starts here */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	0x20000	/* environment starts here */
 
 #endif							/* __CONFIG_H */