arm nomadik: rename board to nhk8815

This is an error in my side in the initial submission: nobody
calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

1 files changed, 0 insertions, 167 deletions

diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h
deleted file mode 100644
index 6d7b94f..0000000
--- a/include/configs/nmdk8815.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2005
- * STMicroelectronics.
- * Configuration settings for the STn8815 nomadik board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <nomadik.h>
-
-#define CONFIG_ARM926EJS
-#define CONFIG_NOMADIK
-#define CONFIG_NOMADIK_8815
-#define CONFIG_NOMADIK_NDK15
-#define CONFIG_NOMADIK_NHK15
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
-
-/* commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-/* There is no NOR flash, so undefine these commands */
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_SYS_NO_FLASH
-/* There is NAND storage */
-#define CONFIG_NAND_NOMADIK
-#define CONFIG_CMD_JFFS2
-
-/* user interface */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT		"Nomadik> "
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
-					+ sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_LOAD_ADDR	0x800000	/* default load address */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* boot config */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_BOOTDELAY	1
-#define CONFIG_BOOTARGS	"root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc"
-#define CONFIG_BOOTCOMMAND	"fsload 0x100000 kernel.uimg;" \
-				" fsload 0x800000 initrd.gz.uimg;" \
-				" bootm 0x100000 0x800000"
-
-/* memory-related information */
-#define CONFIG_NR_DRAM_BANKS	2
-#define PHYS_SDRAM_1		0x00000000	/* DDR-SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
-#define PHYS_SDRAM_2		0x08000000	/* SDR-SDRAM BANK #2*/
-#define PHYS_SDRAM_2_SIZE	0x04000000	/* 64 MB */
-
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#  define CONFIG_STACKSIZE_IRQ	(4 * 1024)	/* IRQ stack */
-#  define CONFIG_STACKSIZE_FIQ	(4 * 1024)	/* FIQ stack */
-#endif
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000
-#define CONFIG_SYS_MEMTEST_END		0x0FFFFFFF
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
-
-#define CONFIG_MISC_INIT_R	/* call misc_init_r during start up */
-
-/* timing informazion */
-#define CONFIG_SYS_HZ		(2400000 / 256)	/* Timer0: 2.4Mhz + divider */
-#define CONFIG_SYS_TIMERBASE	0x101E2000
-
-/* serial port (PL011) configuration */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_SERIAL0		0x101FD000
-#define CFG_SERIAL1		0x101FB000
-
-#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
-#define CONFIG_PL011_CLOCK	48000000
-
-/* Ethernet */
-#define PCI_MEMORY_VADDR	0xe8000000
-#define PCI_IO_VADDR		0xee000000
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-#define __mem_isa(a)		((a) + PCI_MEMORY_VADDR)
-
-#define CONFIG_DRIVER_SMC91111	/* Using SMC91c111*/
-#define CONFIG_SMC91111_BASE	0x34000300
-#undef  CONFIG_SMC91111_EXT_PHY	/* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_BOOTFILE		"uImage"
-
-/* flash memory and filesystem information */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MTD_ONENAND_VERIFY_WRITE
-#define CONFIG_SYS_ONENAND_BASE		0x30000000
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000 /* SMPS0n */
-
-#ifdef CONFIG_BOOT_ONENAND
-
-#   define CONFIG_CMD_ONENAND /* Temporary: nand and onenand can't coexist */
-   /* Partition				Size	Start
-    * XloaderTOC + X-Loader		256KB	0x00000000
-    * Memory init function		256KB	0x00040000
-    * U-Boot				2MB	0x00080000
-    * Sysimage (kernel + ramdisk)	4MB	0x00280000
-    * JFFS2 Root filesystem		22MB	0x00680000
-    * JFFS2 User Data			227.5MB	0x01C80000
-    */
-#   define CONFIG_JFFS2_PART_SIZE	0x400000
-#   define CONFIG_JFFS2_PART_OFFSET	0x280000
-
-#   define CONFIG_ENV_IS_IN_ONENAND
-#   define CONFIG_ENV_SIZE		(256 * 1024)
-#   define CONFIG_ENV_ADDR		0x30300000
-
-#else /* ! CONFIG_BOOT_ONENAND */
-
-#   define CONFIG_CMD_NAND /* Temporary: nand and onenand can't coexist */
-
-#   define CONFIG_JFFS2_DEV		"nand0"
-#   define CONFIG_JFFS2_NAND		1 /* For the jffs2 support*/
-#   define CONFIG_JFFS2_PART_SIZE	0x00300000
-#   define CONFIG_JFFS2_PART_OFFSET	0x00280000
-
-#   define CONFIG_ENV_IS_IN_NAND
-#   define CONFIG_ENV_SIZE		0x20000 /* 128 Kb - one sector */
-#   define CONFIG_ENV_OFFSET		(0x8000000 - CONFIG_ENV_SIZE)
-
-#endif /* CONFIG_BOOT_ONENAND */
-
-/* this is needed to make hello_world.c and other stuff happy */
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-
-#endif /* __CONFIG_H */