MLK-14382-3 mx6ularm2: Convert to enable OF_CONTROL and DM drivers

Update mx6ul ddr3 arm2 and lpddr2 arm2 boards codes and build configurations
to enable OF_CONTROL and DM drivers.

1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR/EIMNOR

Signed-off-by: Ye Li <ye.li@nxp.com>

1 files changed, 29 insertions, 52 deletions

diff --git a/include/configs/mx6ul_arm2.h b/include/configs/mx6ul_arm2.h
index b4c068d..21dc94f 100644
--- a/include/configs/mx6ul_arm2.h
+++ b/include/configs/mx6ul_arm2.h
@@ -14,41 +14,35 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /* I2C configs */
-#define CONFIG_CMD_I2C
-#ifdef CONFIG_CMD_I2C
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
+#ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 
 /* PMIC */
+#ifndef CONFIG_DM_PMIC
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 #endif
+#endif
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-#ifdef CONFIG_SYS_BOOT_NAND
+
+#ifdef CONFIG_NAND_BOOT
 #define MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),1m(misc),-(rootfs) "
 #else
 #define MFG_NAND_PARTITION ""
 #endif
 
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MODE \
-	"panel=MCIMX28LCD\0"
-#else
-#define CONFIG_VIDEO_MODE ""
-#endif
-
 #define CONFIG_MFG_ENV_SETTINGS \
 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
 		BOOTARGS_CMA_SIZE \
@@ -64,10 +58,10 @@
 	"initrd_high=0xffffffff\0" \
 	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
 
-#if defined(CONFIG_SYS_BOOT_NAND)
+#if defined(CONFIG_NAND_BOOT)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS \
-	CONFIG_VIDEO_MODE \
+	"panel=MCIMX28LCD\0" \
 	"fdt_addr=0x83000000\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"console=ttymxc0\0" \
@@ -82,7 +76,7 @@
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS \
-	CONFIG_VIDEO_MODE \
+	"panel=MCIMX28LCD\0" \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
@@ -160,10 +154,11 @@
 	   "else run netboot; fi"
 #endif
 
-#define CONFIG_CMD_MEMTEST
+/* Miscellaneous configurable options */
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
 
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
 #define CONFIG_STACKSIZE		SZ_128K
@@ -183,8 +178,7 @@
 
 #define CONFIG_ENV_SIZE			SZ_8K
 
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_CMD_NAND
+#ifdef CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
 
 /* NAND stuff */
@@ -200,8 +194,7 @@
 #define CONFIG_APBH_DMA_BURST8
 #endif
 
-#ifdef CONFIG_SYS_USE_EIMNOR
-#undef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
 #define CONFIG_SYS_FLASH_SECT_SIZE     (256 * 1024)
 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
@@ -212,25 +205,20 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #endif
 
-#ifdef CONFIG_SYS_USE_QSPI
-#define CONFIG_FSL_QSPI    /* enable the QUADSPI driver */
-#define CONFIG_QSPI_BASE		QSPI0_BASE_ADDR
-#define CONFIG_QSPI_MEMMAP_BASE		QSPI0_AMBA_BASE
-
-#define CONFIG_CMD_SF
-#define	CONFIG_SPI_FLASH
-#define	CONFIG_SPI_FLASH_STMICRO
-#define	CONFIG_SPI_FLASH_BAR
-#define	CONFIG_SF_DEFAULT_BUS		0
-#define	CONFIG_SF_DEFAULT_CS		0
-#define	CONFIG_SF_DEFAULT_SPEED		40000000
-#define	CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SYS_FSL_QSPI_AHB
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED	40000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define FSL_QSPI_FLASH_NUM		1
+#define FSL_QSPI_FLASH_SIZE		SZ_32M
 #endif
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(13 * SZ_64K)
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-#define CONFIG_ENV_OFFSET		(768 * 1024)
+#define CONFIG_ENV_OFFSET		(864 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
@@ -251,7 +239,7 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-#ifdef CONFIG_SYS_USE_NAND
+#ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #else
 #define CONFIG_SYS_FSL_USDHC_NUM	2
@@ -264,13 +252,9 @@
 #define CONFIG_CMD_BMODE
 
 #ifdef CONFIG_VIDEO
-#define	CONFIG_CFB_CONSOLE
-#define	CONFIG_VIDEO_MXS
-#define	CONFIG_VIDEO_LOGO
-#define	CONFIG_VIDEO_SW_CURSOR
-#define	CONFIG_VGA_AS_SINGLE_DEVICE
-#define	CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define	CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define	CONFIG_CMD_BMP
 #define	CONFIG_BMP_16BPP
@@ -280,17 +264,10 @@
 #endif
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
-#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS   0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #endif
 
 #endif