Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 105 insertions, 107 deletions

diff --git a/include/configs/mucmc52.h b/include/configs/mucmc52.h
index 18200ec..2f48a0f 100644
--- a/include/configs/mucmc52.h
+++ b/include/configs/mucmc52.h
@@ -36,14 +36,14 @@
 #define	CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
 #define	CONFIG_MUCMC52		1	/* MUCMC52 board			*/
 
-#define	CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#define	CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define	BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define	BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define	CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define	CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#define	CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CONFIG_SYS_CMD_KGDB)
+#  define	CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 #define	CONFIG_BOARD_EARLY_INIT_R
@@ -56,7 +56,7 @@
  */
 #define	CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define	CONFIG_BAUDRATE		38400	/* ... at 38400 bps	*/
-#define	CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define	CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define	CONFIG_DOS_PARTITION
@@ -83,7 +83,7 @@
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
 #if (TEXT_BASE == 0xFFF00000) /* Boot low */
-#   define	CFG_LOWBOOT		1
+#   define	CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -118,79 +118,77 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef	CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef	CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
  */
 #define	CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define	CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define	CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define	CFG_I2C_SPEED		100000 /* 100 kHz */
-#define	CFG_I2C_SLAVE		0x7F
+#define	CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define	CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define	CFG_I2C_EEPROM_ADDR		0x58
-#define	CFG_I2C_EEPROM_ADDR_LEN		1
-#define	CFG_EEPROM_PAGE_WRITE_BITS	4
-#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-/* for LM81 */
-#define	CFG_EEPROM_PAGE_WRITE_ENABLE
+#define	CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define	CONFIG_RTC_PCF8563
-#define	CFG_I2C_RTC_ADDR		0x51
+#define	CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /* I2C SYSMON (LM75) */
 #define	CONFIG_DTT_LM81			1	/* ON Semi's LM75		*/
 #define	CONFIG_DTT_SENSORS		{0}	/* Sensor addresses		*/
-#define	CFG_DTT_MAX_TEMP		70
-#define	CFG_DTT_LOW_TEMP		-30
-#define	CFG_DTT_HYSTERESIS		3
+#define	CONFIG_SYS_DTT_MAX_TEMP		70
+#define	CONFIG_SYS_DTT_LOW_TEMP		-30
+#define	CONFIG_SYS_DTT_HYSTERESIS		3
 
 /*
  * Flash configuration
  */
-#define	CFG_FLASH_BASE		0xFF800000
+#define	CONFIG_SYS_FLASH_BASE		0xFF800000
 
-#define	CFG_FLASH_SIZE		0x00800000 /* 8 MByte */
-#define	CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip */
+#define	CONFIG_SYS_FLASH_SIZE		0x00800000 /* 8 MByte */
+#define	CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip */
 
-#define	CFG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
-#define	CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define	CONFIG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define	CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define	CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define	CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define	CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 #define	CONFIG_FLASH_CFI_DRIVER
-#define	CFG_FLASH_CFI
-#define	CFG_FLASH_EMPTY_INFO
-#define	CFG_FLASH_CFI_AMD_RESET
+#define	CONFIG_SYS_FLASH_CFI
+#define	CONFIG_SYS_FLASH_EMPTY_INFO
+#define	CONFIG_SYS_FLASH_CFI_AMD_RESET
 
 /*
  * Environment settings
  */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_SIZE		0x4000
-#define	CFG_ENV_SECT_SIZE	0x20000
-#define	CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_SECT_SIZE	0x20000
+#define	CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define	CFG_MBAR		0xF0000000
-#define	CFG_SDRAM_BASE		0x00000000
-#define	CFG_DEFAULT_MBAR	0x80000000
-#define	CFG_DISPLAY_BASE	0x80600000
-#define	CFG_STATUS1_BASE	0x80600200
-#define	CFG_STATUS2_BASE	0x80600300
-#define	CFG_PMI_UNI_BASE	0x80800000
-#define	CFG_PMI_BROAD_BASE	0x80810000
+#define	CONFIG_SYS_MBAR		0xF0000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define	CONFIG_SYS_DISPLAY_BASE	0x80600000
+#define	CONFIG_SYS_STATUS1_BASE	0x80600200
+#define	CONFIG_SYS_STATUS2_BASE	0x80600300
+#define	CONFIG_SYS_PMI_UNI_BASE	0x80800000
+#define	CONFIG_SYS_PMI_BROAD_BASE	0x80810000
 
 /* Settings for XLB = 132 MHz */
 #define	SDRAM_DDR	 1
@@ -202,26 +200,26 @@
 #define	SDRAM_TAPDELAY  0x10000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define	CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define	CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define	CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define	CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define	CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define	CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
-#define	CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define	CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define	CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define	CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define	CFG_RAMBOOT	1
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define	CONFIG_SYS_RAMBOOT	1
 #endif
 
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define	CFG_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -233,7 +231,7 @@
 /*
  * GPIO configuration
  */
-#define	CFG_GPS_PORT_CONFIG	0x8D550644
+#define	CONFIG_SYS_GPS_PORT_CONFIG	0x8D550644
 
 /*use  Hardware WDT */
 #define CONFIG_HW_WATCHDOG
@@ -241,29 +239,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory	    */
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CONFIG_SYS_CMD_KGDB)
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define	CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define	CFG_ALT_MEMTEST
+#define	CONFIG_SYS_ALT_MEMTEST
 
-#define	CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define	CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define	CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define	CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address */
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * Enable loopw commando. This has only affect, if CONFIG_SYS_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)
  */
 #define	CONFIG_LOOPW
@@ -272,46 +270,46 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define	CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define	CFG_HID0_FINAL		HID0_ICE
+#define	CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define	CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define	CFG_HID0_INIT		0
-#define	CFG_HID0_FINAL		0
+#define	CONFIG_SYS_HID0_INIT		0
+#define	CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define	CFG_BOOTCS_START	CFG_FLASH_BASE
-#define	CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define	CFG_BOOTCS_CFG		0x0004FB00
-#define	CFG_CS0_START		CFG_FLASH_BASE
-#define	CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define	CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define	CONFIG_SYS_BOOTCS_CFG		0x0004FB00
+#define	CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* 8Mbit SRAM @0x80100000 */
-#define	CFG_CS1_START		0x80100000
-#define	CFG_CS1_SIZE		0x00100000
-#define	CFG_CS1_CFG		0x00019B00
+#define	CONFIG_SYS_CS1_START		0x80100000
+#define	CONFIG_SYS_CS1_SIZE		0x00100000
+#define	CONFIG_SYS_CS1_CFG		0x00019B00
 
 /* FRAM 32Kbyte @0x80700000 */
-#define	CFG_CS2_START		0x80700000
-#define	CFG_CS2_SIZE		0x00008000
-#define	CFG_CS2_CFG		0x00019800
+#define	CONFIG_SYS_CS2_START		0x80700000
+#define	CONFIG_SYS_CS2_SIZE		0x00008000
+#define	CONFIG_SYS_CS2_CFG		0x00019800
 
 /* Display H1, Status Inputs, EPLD @0x80600000 */
-#define	CFG_CS3_START		0x80600000
-#define	CFG_CS3_SIZE		0x00100000
-#define	CFG_CS3_CFG		0x00019800
+#define	CONFIG_SYS_CS3_START		0x80600000
+#define	CONFIG_SYS_CS3_SIZE		0x00100000
+#define	CONFIG_SYS_CS3_CFG		0x00019800
 
 /* PMI Unicast 32Kbyte @0x80800000 */
-#define	CFG_CS6_START		CFG_PMI_UNI_BASE
-#define	CFG_CS6_SIZE		0x00008000
-#define	CFG_CS6_CFG		0xFFFFF930
+#define	CONFIG_SYS_CS6_START		CONFIG_SYS_PMI_UNI_BASE
+#define	CONFIG_SYS_CS6_SIZE		0x00008000
+#define	CONFIG_SYS_CS6_CFG		0xFFFFF930
 
 /* PMI Broadcast 32Kbyte @0x80810000 */
-#define	CFG_CS7_START		CFG_PMI_BROAD_BASE
-#define	CFG_CS7_SIZE		0x00008000
-#define	CFG_CS7_CFG		0xFF00F930
+#define	CONFIG_SYS_CS7_START		CONFIG_SYS_PMI_BROAD_BASE
+#define	CONFIG_SYS_CS7_SIZE		0x00008000
+#define	CONFIG_SYS_CS7_CFG		0xFF00F930
 
-#define	CFG_CS_BURST		0x00000000
-#define	CFG_CS_DEADCYCLE	0x33333333
+#define	CONFIG_SYS_CS_BURST		0x00000000
+#define	CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff Supports IDE harddisk
@@ -323,26 +321,26 @@
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 
-#define	CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define	CFG_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
+#define	CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define	CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
 
 #define	CONFIG_IDE_PREINIT	1
 
-#define	CFG_ATA_IDE0_OFFSET	0x0000
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define	CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define	CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define	CFG_ATA_DATA_OFFSET	(0x0060)
+#define	CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define	CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define	CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define	CFG_ATA_ALT_OFFSET	(0x005C)
+#define	CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers           */
-#define	CFG_ATA_STRIDE          4
+#define	CONFIG_SYS_ATA_STRIDE          4
 
 #define	CONFIG_ATAPI            1
 
@@ -364,13 +362,13 @@
 #define	CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define	CONFIG_PCI_IO_SIZE	0x01000000
 
-#define	CFG_ISA_IO		CONFIG_PCI_IO_BUS
+#define	CONFIG_SYS_ISA_IO		CONFIG_PCI_IO_BUS
 
 /*---------------------------------------------------------------------*/
 /* Display addresses						       */
 /*---------------------------------------------------------------------*/
 
-#define	CFG_DISP_CHR_RAM	(CFG_DISPLAY_BASE + 0x38)
-#define	CFG_DISP_CWORD		(CFG_DISPLAY_BASE + 0x30)
+#define	CONFIG_SYS_DISP_CHR_RAM	(CONFIG_SYS_DISPLAY_BASE + 0x38)
+#define	CONFIG_SYS_DISP_CWORD		(CONFIG_SYS_DISPLAY_BASE + 0x30)
 
 #endif /* __CONFIG_H */