Clean up the code according to codestyle:

(1) remove some C++ comments.
(2) remove trailing white space.
(3) remove trailing empty line.
(4) Indentation by table.
(5) remove {} in one line condition.
(6) add space before '(' in function call.
Remove some weird printf () output.
Add necessary comments.
Modified Makefile to support building in a separate directory.

1 files changed, 145 insertions, 145 deletions

diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 24cc86b..b13b699 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -24,12 +24,11 @@
  * MA 02111-1307 USA
  */
 
-/****************************************************************
- *
+/*
  * board specific configuration options for Freescale
  * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
  *
- ****************************************************************/
+ */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
@@ -45,11 +44,11 @@
 #define CONFIG_750FX		/* this option to enable init of extended BATs */
 #define CONFIG_ALTIVEC		/* undef to disable */
 
-#define CFG_BOARD_NAME       "MPC7448 HPC II"
-#define CONFIG_IDENT_STRING  " Freescale MPC7448 HPC II"
+#define CFG_BOARD_NAME		"MPC7448 HPC II"
+#define CONFIG_IDENT_STRING	" Freescale MPC7448 HPC II"
 
-#define CFG_OCN_CLK         133000000	/* 133 MHz */
-#define CFG_CONFIG_BUS_CLK         133000000
+#define CFG_OCN_CLK		133000000	/* 133 MHz */
+#define CFG_CONFIG_BUS_CLK	133000000
 
 #define CFG_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
 
@@ -63,10 +62,10 @@
 
 /* Default MAC Addresses for on-chip GIGE Controller */
 
-#define CONFIG_ETHADDR      00:06:D2:00:00:01
+#define CONFIG_ETHADDR		00:06:D2:00:00:01
 
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR     00:06:D2:00:00:02
+#define CONFIG_ETH1ADDR		00:06:D2:00:00:02
 
 #define CONFIG_ENV_OVERWRITE
 
@@ -75,12 +74,12 @@
  * (easy to change)
  */
 
-#define CONFIG_BAUDRATE    115200	/* console baudrate = 115000 */
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115000 */
 
 /*#define CFG_HUSH_PARSER */
 #undef CFG_HUSH_PARSER
 
-#define CFG_PROMPT_HUSH_PS2  "> "
+#define CFG_PROMPT_HUSH_PS2	"> "
 
 /* Pass open firmware flat tree */
 #define CONFIG_OF_FLAT_TREE	1
@@ -99,29 +98,30 @@
  * for your console driver.
  *
  * what to do:
- * If you have hacked a serial cable onto the second DUART channel, change the CFG_DUART port from 1
- * to 0 below.
+ * If you have hacked a serial cable onto the second DUART channel,
+ * change the CFG_DUART port from 1 to 0 below.
  *
  */
 
-#define CONFIG_CONS_INDEX     1
+#define CONFIG_CONS_INDEX	1
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_REG_SIZE	1
 #define CFG_NS16550_CLK		CFG_OCN_CLK * 8
 
-#define CFG_NS16550_COM1        (CFG_TSI108_CSR_RST_BASE+0x7808)
-#define CFG_NS16550_COM2        (CFG_TSI108_CSR_RST_BASE+0x7C08)
+#define CFG_NS16550_COM1	(CFG_TSI108_CSR_RST_BASE+0x7808)
+#define CFG_NS16550_COM2	(CFG_TSI108_CSR_RST_BASE+0x7C08)
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_BOOTDELAY     3	/* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #undef CONFIG_BOOTARGS
-/*#define CONFIG_PREBOOT  "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" */
+/* #define CONFIG_PREBOOT  "echo;echo Type \"run flash_nfs\"
+ * to mount root filesystem over NFS;echo" */
 
 #if (CONFIG_BOOTDELAY >= 0)
-#define CONFIG_BOOTCOMMAND      "tftpboot 0x400000 zImage.initrd.elf;\
+#define CONFIG_BOOTCOMMAND	"tftpboot 0x400000 zImage.initrd.elf;\
  setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
  ip=$(ipaddr):$(serverip)$(bootargs_end);  bootm 0x400000; "
 
@@ -130,34 +130,34 @@
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 
-#define CONFIG_SERIAL    "No. 1"
+#define CONFIG_SERIAL	"No. 1"
 
 /* Networking Configuration */
 
-#define KSEG1ADDR(a)   (a)	/* Needed by the rtl8139 driver */
+#define KSEG1ADDR(a)	(a)	/* Needed by the rtl8139 driver */
 
 #define CONFIG_TSI108_ETH
-#define CONFIG_TSI108_ETH_NUM_PORTS 2
+#define CONFIG_TSI108_ETH_NUM_PORTS	2
 
 #define CONFIG_NET_MULTI
 
-#define CONFIG_IPADDR       172.27.234.48
-#define CONFIG_SERVERIP     172.27.234.10
-#define CONFIG_NETMASK      255.255.0.0
-#define CONFIG_GATEWAYIP    172.27.255.254
+#define CONFIG_IPADDR		172.27.234.48
+#define CONFIG_SERVERIP		172.27.234.10
+#define CONFIG_NETMASK		255.255.0.0
+#define CONFIG_GATEWAYIP	172.27.255.254
 
-#define CONFIG_BOOTFILE     zImage.initrd.elf
-#define CONFIG_LOADADDR     0x400000
+#define CONFIG_BOOTFILE		zImage.initrd.elf
+#define CONFIG_LOADADDR		0x400000
 
 /*-------------------------------------------------------------------------- */
 
-#define CONFIG_LOADS_ECHO   0	/* echo off for serial download */
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
 #define CFG_LOADS_BAUD_CHANGE	/* allow baudrate changes */
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
-#define CONFIG_BOOTP_MASK  (CONFIG_BOOTP_DEFAULT | \
-                            CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
+				CONFIG_BOOTP_BOOTFILESIZE)
 
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
 		| CFG_CMD_ASKENV \
@@ -178,59 +178,59 @@
 
 /*set date in u-boot*/
 #define CONFIG_RTC_M48T35A
-#define CFG_NVRAM_BASE_ADDR 0xfc000000
-#define CFG_NVRAM_SIZE 0x8000
+#define CFG_NVRAM_BASE_ADDR	0xfc000000
+#define CFG_NVRAM_SIZE		0x8000
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_VERSION_VARIABLE		1
 #define CONFIG_TSI108_I2C
 
-#define CFG_I2C_EEPROM_ADDR      0x50	/* I2C EEPROM page 1 */
-#define CFG_I2C_EEPROM_ADDR_LEN     1	/* Bytes of address */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* I2C EEPROM page 1 */
+#define CFG_I2C_EEPROM_ADDR_LEN		1	/* Bytes of address */
 
 #define CFG_LONGHELP		/* undef to save memory */
 #define CFG_PROMPT	"=> "	/* Monitor Command Prompt */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE               1024	/* Console I/O Buffer Size */
-#define CONFIG_KGDB_BAUDRATE   115200	/* speed to run kgdb serial port at */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #else
-#define CFG_CBSIZE               256	/* Console I/O Buffer Size */
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS     16	/* max number of command args */
-#define CFG_BARGSIZE    CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
 #define CFG_DRAM_TEST
- * DRAM tests
- *   CFG_DRAM_TEST - enables the following tests.
+ *			DRAM tests
+ * CFG_DRAM_TEST - enables the following tests.
  *
- *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
- *			  Environment variable 'test_dram_data' must be
- *			  set to 'y'.
- *   CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word is uniquely
- *			  addressable. Environment variable
- *			  'test_dram_address' must be set to 'y'.
- *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- *			  This test takes about 6 minutes to test 64 MB.
- *			  Environment variable 'test_dram_walk' must be
- *			  set to 'y'.
+ * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ *			Environment variable 'test_dram_data' must be
+ *			set to 'y'.
+ * CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word
+ * 			is uniquely addressable. Environment variable
+ *			'test_dram_address' must be set to 'y'.
+ * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ *			This test takes about 6 minutes to test 64 MB.
+ *			Environment variable 'test_dram_walk' must be
+ *			set to 'y'.
  */
 #undef CFG_DRAM_TEST
-#define CFG_MEMTEST_START       0x00400000	/* memtest works on */
-#define CFG_MEMTEST_END         0x07c00000	/* 4 ... 124 MB in DRAM */
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on */
+#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
 #if defined(CFG_DRAM_TEST)
 #define CFG_DRAM_TEST_DATA
 #define CFG_DRAM_TEST_ADDRESS
 #define CFG_DRAM_TEST_WALK
-#endif				/* CFG_DRAM_TEST */
+#endif	/* CFG_DRAM_TEST */
 
-#define CFG_LOAD_ADDR           0x00400000	/* default load address */
+#define CFG_LOAD_ADDR	0x00400000	/* default load address */
 
-#define CFG_HZ                  1000	/* decr freq: 1ms ticks */
+#define CFG_HZ		1000		/* decr freq: 1ms ticks */
 
 /*
  * Low Level Configuration Settings
@@ -246,12 +246,12 @@
  * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
-*/
+ */
 #undef  CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR   0x07d00000	/* unused memory region */
-#define CFG_INIT_RAM_END 0x4000	/* larger space - we have SDRAM initialized */
+#define CFG_INIT_RAM_ADDR	0x07d00000	/* unused memory region */
+#define CFG_INIT_RAM_END	0x4000/* larger space - we have SDRAM initialized */
 
-#define CFG_GBL_DATA_SIZE   128	/* size in bytes reserved for init data */
+#define CFG_GBL_DATA_SIZE	128/* size in bytes reserved for init data */
 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 
 /*-----------------------------------------------------------------------
@@ -260,54 +260,54 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 
-#define CFG_SDRAM_BASE       0x00000000	/* first 256 MB of SDRAM */
-#define CFG_SDRAM1_BASE      0x10000000	/* next 256MB of SDRAM */
+#define CFG_SDRAM_BASE		0x00000000	/* first 256 MB of SDRAM */
+#define CFG_SDRAM1_BASE		0x10000000	/* next 256MB of SDRAM */
 
-#define CFG_SDRAM2_BASE      0x40000000	/* beginning of non-cacheable alias for SDRAM - first 256MB */
-#define CFG_SDRAM3_BASE      0x50000000	/* next Non-Cacheable 256MB of SDRAM */
+#define CFG_SDRAM2_BASE	0x40000000	/* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CFG_SDRAM3_BASE	0x50000000	/* next Non-Cacheable 256MB of SDRAM */
 
-#define CFG_PCI_PFM_BASE     0x80000000	/* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+#define CFG_PCI_PFM_BASE	0x80000000	/* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
 
-#define CFG_PCI_MEM32_BASE   0xE0000000	/* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+#define CFG_PCI_MEM32_BASE	0xE0000000	/* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
 
-#define CFG_MISC_REGION_BASE 0xf0000000	/* Base Address for (PCI/X + Flash) region */
+#define CFG_MISC_REGION_BASE	0xf0000000	/* Base Address for (PCI/X + Flash) region */
 
-#define CFG_FLASH_BASE       0xff000000	/* Base Address of Flash device */
-#define CFG_FLASH_BASE2      0xfe000000	/* Alternate Flash Base Address */
+#define CFG_FLASH_BASE	0xff000000	/* Base Address of Flash device */
+#define CFG_FLASH_BASE2	0xfe000000	/* Alternate Flash Base Address */
 
 #define CONFIG_VERY_BIG_RAM	/* we will use up to 256M memory for cause we are short of BATS */
 
-#define PCI0_IO_BASE_BOOTM   0xfd000000
+#define PCI0_IO_BASE_BOOTM	0xfd000000
 
-#define CFG_RESET_ADDRESS  0x3fffff00
-#define CFG_MONITOR_LEN    (256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE   TEXT_BASE	/* u-boot code base */
-#define CFG_MALLOC_LEN     (256 << 10)	/* Reserve 256 kB for malloc */
+#define CFG_RESET_ADDRESS	0x3fffff00
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* u-boot code base */
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* Peripheral Device section */
 
-/*******************************************************
+/*
  * Resources on the Tsi108
- *******************************************************/
+ */
 
-#define CFG_TSI108_CSR_RST_BASE 0xC0000000	/* Tsi108 CSR base after reset */
-#define CFG_TSI108_CSR_BASE     CFG_TSI108_CSR_RST_BASE	/* Runtime Tsi108 CSR base */
+#define CFG_TSI108_CSR_RST_BASE	0xC0000000	/* Tsi108 CSR base after reset */
+#define CFG_TSI108_CSR_BASE	CFG_TSI108_CSR_RST_BASE	/* Runtime Tsi108 CSR base */
 
 #define ENABLE_PCI_CSR_BAR	/* enables access to Tsi108 CSRs from the PCI/X bus */
 
 #undef  DISABLE_PBM
 
-/*-----------------------------------------------------------------------
+/*
  * PCI stuff
- *-----------------------------------------------------------------------
+ *
  */
 
 #define CONFIG_PCI		/* include pci support */
 #define CONFIG_TSI108_PCI	/* include tsi108 pci support */
 
-#define PCI_HOST_ADAPTER  0	/* configure as pci adapter */
-#define PCI_HOST_FORCE    1	/* configure as pci host */
-#define PCI_HOST_AUTO     2	/* detected via arbiter enable */
+#define PCI_HOST_ADAPTER	0	/* configure as pci adapter */
+#define PCI_HOST_FORCE		1	/* configure as pci host */
+#define PCI_HOST_AUTO		2	/* detected via arbiter enable */
 
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function */
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
@@ -315,20 +315,20 @@
 /* PCI MEMORY MAP section */
 
 /* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS      0x00000000
-#define CFG_PCI_MEMORY_PHYS     0x00000000
-#define CFG_PCI_MEMORY_SIZE     0x80000000	
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000	
 
 /* PCI Memory Space */
-#define CFG_PCI_MEM_BUS         (CFG_PCI_MEM_PHYS)
-#define CFG_PCI_MEM_PHYS        (CFG_PCI_MEM32_BASE)	//CFG_PCI_MEM32_BASE = 0xE0000000
-#define CFG_PCI_MEM_SIZE        0x10000000	/* 256 MB space for PCI/X Mem + SDRAM OCN */
+#define CFG_PCI_MEM_BUS		(CFG_PCI_MEM_PHYS)
+#define CFG_PCI_MEM_PHYS	(CFG_PCI_MEM32_BASE)	/* 0xE0000000 */
+#define CFG_PCI_MEM_SIZE	0x10000000	/* 256 MB space for PCI/X Mem + SDRAM OCN */
 
 /* PCI I/O Space */
-#define CFG_PCI_IO_BUS          0x00000000
-#define CFG_PCI_IO_PHYS         0xfa000000	/* Changed from fd000000 */
+#define CFG_PCI_IO_BUS		0x00000000
+#define CFG_PCI_IO_PHYS		0xfa000000	/* Changed from fd000000 */
 
-#define CFG_PCI_IO_SIZE         0x01000000	/* 16MB */
+#define CFG_PCI_IO_SIZE		0x01000000	/* 16MB */
 
 #define _IO_BASE		0x00000000	/* points to PCI I/O space      */
 
@@ -336,91 +336,91 @@
 #define CFG_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
 #define CFG_PCI_CFG_SIZE	0x01000000	/* 16MB */
 
-#define CFG_IBAT0U  0xFE0003FF
-#define CFG_IBAT0L  0xFE000002
+#define CFG_IBAT0U	0xFE0003FF
+#define CFG_IBAT0L	0xFE000002
 
-#define CFG_IBAT1U  0x00007FFF
-#define CFG_IBAT1L  0x00000012
+#define CFG_IBAT1U	0x00007FFF
+#define CFG_IBAT1L	0x00000012
 
-#define CFG_IBAT2U  0x80007FFF
-#define CFG_IBAT2L  0x80000022
+#define CFG_IBAT2U	0x80007FFF
+#define CFG_IBAT2L	0x80000022
 
-#define CFG_IBAT3U  0x00000000
-#define CFG_IBAT3L  0x00000000
+#define CFG_IBAT3U	0x00000000
+#define CFG_IBAT3L	0x00000000
 
-#define CFG_IBAT4U  0x00000000
-#define CFG_IBAT4L  0x00000000
+#define CFG_IBAT4U	0x00000000
+#define CFG_IBAT4L	0x00000000
 
-#define CFG_IBAT5U  0x00000000
-#define CFG_IBAT5L  0x00000000
+#define CFG_IBAT5U	0x00000000
+#define CFG_IBAT5L	0x00000000
 
-#define CFG_IBAT6U  0x00000000
-#define CFG_IBAT6L  0x00000000
+#define CFG_IBAT6U	0x00000000
+#define CFG_IBAT6L	0x00000000
 
-#define CFG_IBAT7U  0x00000000
-#define CFG_IBAT7L  0x00000000
+#define CFG_IBAT7U	0x00000000
+#define CFG_IBAT7L	0x00000000
 
-#define CFG_DBAT0U  0xE0003FFF
-#define CFG_DBAT0L  0xE000002A
+#define CFG_DBAT0U	0xE0003FFF
+#define CFG_DBAT0L	0xE000002A
 
-#define CFG_DBAT1U  0x00007FFF
-#define CFG_DBAT1L  0x00000012
+#define CFG_DBAT1U	0x00007FFF
+#define CFG_DBAT1L	0x00000012
 
-#define CFG_DBAT2U  0x00000000
-#define CFG_DBAT2L  0x00000000
+#define CFG_DBAT2U	0x00000000
+#define CFG_DBAT2L	0x00000000
 
-#define CFG_DBAT3U  0xC0000003
-#define CFG_DBAT3L  0xC000002A
+#define CFG_DBAT3U	0xC0000003
+#define CFG_DBAT3L	0xC000002A
 
-#define CFG_DBAT4U  0x00000000
-#define CFG_DBAT4L  0x00000000
+#define CFG_DBAT4U	0x00000000
+#define CFG_DBAT4L	0x00000000
 
-#define CFG_DBAT5U  0x00000000
-#define CFG_DBAT5L  0x00000000
+#define CFG_DBAT5U	0x00000000
+#define CFG_DBAT5L	0x00000000
 
-#define CFG_DBAT6U  0x00000000
-#define CFG_DBAT6L  0x00000000
+#define CFG_DBAT6U	0x00000000
+#define CFG_DBAT6L	0x00000000
 
-#define CFG_DBAT7U  0x00000000
-#define CFG_DBAT7L  0x00000000
+#define CFG_DBAT7U	0x00000000
+#define CFG_DBAT7L	0x00000000
 
 /* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR    0x51
-#define DIMM1_I2C_ADDR    0x52
+#define DIMM0_I2C_ADDR	0x51
+#define DIMM1_I2C_ADDR	0x52
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ    (8<<20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ	(8<<20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS  1	/* Flash can be at one of two addresses */
-#define FLASH_BANK_SIZE      0x01000000	/* 16 MB Total */
+#define CFG_MAX_FLASH_BANKS	1/* Flash can be at one of two addresses */
+#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total */
 #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
 
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
 #define CFG_FLASH_CFI_SWAP
 
-#define PHYS_FLASH_SIZE     0x01000000
-#define CFG_MAX_FLASH_SECT  (128)
+#define PHYS_FLASH_SIZE		0x01000000
+#define CFG_MAX_FLASH_SECT	(128)
 
 #define CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR         0xFC000000
+#define CFG_ENV_ADDR		0xFC000000
 
-#define CFG_ENV_OFFSET      0x00000000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE        0x00000400	/* Total Size of Environment Space */
+#define CFG_ENV_OFFSET	0x00000000	/* Offset of Environment Sector */
+#define CFG_ENV_SIZE	0x00000400	/* Total Size of Environment Space */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE   32	/* For all MPC74xx CPUs */
+#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5	/* log base 2 of the above value */
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -429,16 +429,16 @@
  */
 #undef CFG_L2
 
-#define L2_INIT  0
-#define L2_ENABLE  (L2_INIT | L2CR_L2E)
+#define L2_INIT		0
+#define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
 /*
  * Internal Definitions
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD    0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM    0x02	/* Software reboot */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
 #define CFG_EXCEPTION_AFTER_RELOCATE
 #define CFG_SERIAL_HANG_IN_EXCEPTION
-#endif				/* __CONFIG_H */
+#endif	/* __CONFIG_H */