Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 14 insertions, 87 deletions

diff --git a/include/configs/ml507.h b/include/configs/ml507.h
index f8cd499..a7319e4 100644
--- a/include/configs/ml507.h
+++ b/include/configs/ml507.h
@@ -17,106 +17,33 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_ML507	1
-#define CONFIG_XILINX_440	1
+
+/*CPU*/
 #define CONFIG_440		1
-#define CONFIG_4xx		1
+#define CONFIG_XILINX_ML507	1
 #include "../board/xilinx/ml507/xparameters.h"
 
 /*Mem Map*/
-#define CFG_SDRAM_BASE		0x0
-#define CFG_SDRAM_SIZE_MB	256
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		( 192 * 1024 )
-#define CFG_MALLOC_LEN		( CFG_ENV_SIZE + 128 * 1024 )
-
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
-#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
+#define CONFIG_SYS_SDRAM_SIZE_MB	256
 
 /*Env*/
-#define	CFG_ENV_IS_IN_FLASH
-#define	CFG_ENV_SIZE		0x20000
-#define	CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_OFFSET 		0x340000
-#define CFG_ENV_ADDR 		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x20000
+#define	CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET	0x340000
+#define CONFIG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
 
 /*Misc*/
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds     */
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt       */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size      */
-#else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
-#endif
-#define CFG_PBSIZE		( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
-#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
-#define CFG_EXTBDINFO		1		/* Extended board_into (bd_t) */
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING			/* add command line history     */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support   */
-#define CONFIG_LOOPW				/* enable loopw command         */
-#define CONFIG_MX_CYCLIC			/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE			/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET			/* don't print console @ startup */
-#define CFG_HUSH_PARSER				/* Use the HUSH parser          */
-#define	CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_LOADS_ECHO			/* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE			/* allow baudrate change        */
-#define CFG_BOOTMAPSZ		( 8 << 20 )	/* Initial Memory map for Linux */
+#define CONFIG_SYS_PROMPT	"ml507:/# "	/* Monitor Command Prompt    */
 #define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
 
-/*Stack*/
-#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
-#define CFG_GBL_DATA_OFFSET	( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
-
 /*Flash*/
-#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
-#define	CFG_FLASH_SIZE		(32*1024*1024)
-#define	CFG_FLASH_CFI		1
-#define	CONFIG_FLASH_CFI_DRIVER	1
-#define	CFG_FLASH_EMPTY_INFO	1
-#define	CFG_MAX_FLASH_BANKS	1
-#define	CFG_MAX_FLASH_SECT	259
-#define	CFG_FLASH_PROTECTION
+#define	CONFIG_SYS_FLASH_SIZE	(32*1024*1024)
+#define	CONFIG_SYS_MAX_FLASH_SECT	259
 #define MTDIDS_DEFAULT		"nor0=ml507-flash"
 #define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
 
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
 
 #endif						/* __CONFIG_H */