Merge branch 'merge' of git://www.denx.de/git/u-boot-microblaze

1 files changed, 26 insertions, 27 deletions

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 7eeae70..b320438 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
  *
- * Michal SIMEK <monstr@seznam.cz>
+ * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,6 +32,7 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
+#define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -58,6 +59,7 @@
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
 
 /* FSL */
 #define	CFG_FSL_2
@@ -86,7 +88,7 @@
  * 0x11FB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x13FF_F000	CFG_GBL_DATA_OFFSET
- * 					GLOBAL_DATA	4kB	bd, gd
+ *					GLOBAL_DATA	4kB	bd, gd
  * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -99,7 +101,7 @@
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -145,6 +147,16 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+	#define	CONFIG_SYSTEMACE
+	/* #define DEBUG_SYSTEMACE */
+	#define	SYSTEMACE_CONFIG_FPGA
+	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+	#define	CONFIG_DOS_PARTITION
+#endif
+
 /*
  * BOOTP options
  */
@@ -153,28 +165,21 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
+#if defined(CONFIG_SYSTEMACE)
+	#define CONFIG_CMD_EXT2
+	#define CONFIG_CMD_FAT
+#endif
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
@@ -186,6 +191,8 @@
 		#define CONFIG_CMD_ENV
 		#define CONFIG_CMD_SAVES
 	#endif
+#else
+	#undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -210,24 +217,16 @@
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP 	192.168.0.5
-#define	CONFIG_GATEWAYIP 	192.168.0.1
+#define	CONFIG_SERVERIP		192.168.0.5
+#define	CONFIG_GATEWAYIP	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000
 
-/* system ace */
-#define	CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define	SYSTEMACE_CONFIG_FPGA
-#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-#define	CONFIG_DOS_PARTITION
-
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\