rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 65 insertions, 65 deletions

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 2a6c68c..63d07ff 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -36,56 +36,56 @@
 #define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
-#define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
+#define	CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
 #else
 #ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4
 #define CONFIG_CONS_INDEX	1
-#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
+#define CONFIG_SYS_NS16550_COM1	XILINX_UART16550_BASEADDR
+#define CONFIG_SYS_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
 #define	CONFIG_BAUDRATE		115200
-#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
+#define	CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 115200 }
 #endif
 #endif
 
 /* setting reset address */
-/*#define	CFG_RESET_ADDRESS	TEXT_BASE*/
+/*#define	CONFIG_SYS_RESET_ADDRESS	TEXT_BASE*/
 
 /* ethernet */
 #ifdef XILINX_EMAC_BASEADDR
 #define CONFIG_XILINX_EMAC	1
-#define CFG_ENET
+#define CONFIG_SYS_ENET
 #else
 #ifdef XILINX_EMACLITE_BASEADDR
 #define CONFIG_XILINX_EMACLITE	1
-#define CFG_ENET
+#define CONFIG_SYS_ENET
 #endif
 #endif
 #undef ET_DEBUG
 
 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
-#define	CFG_GPIO_0		1
-#define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#define	CONFIG_SYS_GPIO_0		1
+#define	CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
 #endif
 
 /* interrupt controller */
 #ifdef XILINX_INTC_BASEADDR
-#define	CFG_INTC_0		1
-#define	CFG_INTC_0_ADDR		XILINX_INTC_BASEADDR
-#define	CFG_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
+#define	CONFIG_SYS_INTC_0		1
+#define	CONFIG_SYS_INTC_0_ADDR		XILINX_INTC_BASEADDR
+#define	CONFIG_SYS_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
 #endif
 
 /* timer */
 #ifdef XILINX_TIMER_BASEADDR
 #if (XILINX_TIMER_IRQ != -1)
-#define	CFG_TIMER_0		1
-#define	CFG_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
-#define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
+#define	CONFIG_SYS_TIMER_0		1
+#define	CONFIG_SYS_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
+#define	CONFIG_SYS_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
-#define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_SYS_TIMER_0_PRELOAD	( FREQUENCE/1000 )
 #endif
 #else
 #ifdef XILINX_CLOCK_FREQ
@@ -95,20 +95,20 @@
 #endif
 #endif
 /* FSL */
-/* #define	CFG_FSL_2 */
+/* #define	CONFIG_SYS_FSL_2 */
 /* #define	FSL_INTR_2	1 */
 
 /*
  * memory layout - Example
  * TEXT_BASE = 0x1200_0000;
- * CFG_SRAM_BASE = 0x1000_0000;
- * CFG_SRAM_SIZE = 0x0400_0000;
+ * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
+ * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
  *
- * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
- * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
+ * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
+ * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
+ * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
  *
- * 0x1000_0000	CFG_SDRAM_BASE
+ * 0x1000_0000	CONFIG_SYS_SDRAM_BASE
  *					FREE
  * 0x1200_0000	TEXT_BASE
  *		U-BOOT code
@@ -116,68 +116,68 @@
  *					FREE
  *
  *					STACK
- * 0x13F7_F000	CFG_MALLOC_BASE
+ * 0x13F7_F000	CONFIG_SYS_MALLOC_BASE
  *					MALLOC_AREA	256kB	Alloc
- * 0x11FB_F000	CFG_MONITOR_BASE
+ * 0x11FB_F000	CONFIG_SYS_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
- * 0x13FF_F000	CFG_GBL_DATA_OFFSET
+ * 0x13FF_F000	CONFIG_SYS_GBL_DATA_OFFSET
  *					GLOBAL_DATA	4kB	bd, gd
- * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
+ * 0x1400_0000	CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
  */
 
 /* ddr sdram - main memory */
-#define	CFG_SDRAM_BASE		XILINX_RAM_START
-#define	CFG_SDRAM_SIZE		XILINX_RAM_SIZE
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
-#define	CFG_MEMTEST_END		(CFG_SDRAM_BASE + 0x1000)
+#define	CONFIG_SYS_SDRAM_BASE		XILINX_RAM_START
+#define	CONFIG_SYS_SDRAM_SIZE		XILINX_RAM_SIZE
+#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
 
 /* global pointer */
-#define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
+#define	CONFIG_SYS_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
-#define	CFG_MONITOR_LEN		SIZE
-#define	CFG_MONITOR_BASE	(CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
-#define	CFG_MONITOR_END		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define	CFG_MALLOC_LEN		SIZE
-#define	CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define	CONFIG_SYS_MONITOR_LEN		SIZE
+#define	CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_SYS_MONITOR_END		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_SYS_MALLOC_LEN		SIZE
+#define	CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
 
 /* stack */
-#define	CFG_INIT_SP_OFFSET	CFG_MONITOR_BASE
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_MONITOR_BASE
 
 /*#define	RAMENV */
 #define	FLASH
 
 #ifdef FLASH
-	#define	CFG_FLASH_BASE		XILINX_FLASH_START
-	#define	CFG_FLASH_SIZE		XILINX_FLASH_SIZE
-	#define	CFG_FLASH_CFI		1
+	#define	CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
+	#define	CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
+	#define	CONFIG_SYS_FLASH_CFI		1
 	#define	CONFIG_FLASH_CFI_DRIVER	1
-	#define	CFG_FLASH_EMPTY_INFO	1	/* ?empty sector */
-	#define	CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-	#define	CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
+	#define	CONFIG_SYS_FLASH_EMPTY_INFO	1	/* ?empty sector */
+	#define	CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+	#define	CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+	#define	CONFIG_SYS_FLASH_PROTECTION		/* hardware flash protection */
 
 	#ifdef	RAMENV
 		#define	CONFIG_ENV_IS_NOWHERE	1
 		#define	CONFIG_ENV_SIZE		0x1000
-		#define	CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - CONFIG_ENV_SIZE)
+		#define	CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 
 	#else	/* !RAMENV */
 		#define	CONFIG_ENV_IS_IN_FLASH	1
 		#define	CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-		#define	CONFIG_ENV_ADDR		(CFG_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+		#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
 		#define	CONFIG_ENV_SIZE		0x40000
 	#endif /* !RAMBOOT */
 #else /* !FLASH */
 	/* ENV in RAM */
-	#define	CFG_NO_FLASH		1
+	#define	CONFIG_SYS_NO_FLASH		1
 	#define	CONFIG_ENV_IS_NOWHERE	1
 	#define	CONFIG_ENV_SIZE		0x1000
-	#define	CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - CONFIG_ENV_SIZE)
-	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
+	#define	CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+	#define	CONFIG_SYS_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
 /* system ace */
@@ -185,8 +185,8 @@
 	#define	CONFIG_SYSTEMACE
 	/* #define DEBUG_SYSTEMACE */
 	#define	SYSTEMACE_CONFIG_FPGA
-	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+	#define	CONFIG_SYS_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+	#define	CONFIG_SYS_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 	#define	CONFIG_DOS_PARTITION
 #endif
 
@@ -208,7 +208,7 @@
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
 
-#ifndef CFG_ENET
+#ifndef CONFIG_SYS_ENET
 	#undef CONFIG_CMD_NET
 #else
 	#define CONFIG_CMD_PING
@@ -245,12 +245,12 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define	CFG_PROMPT	"U-Boot-mONStR> "
-#define	CFG_CBSIZE	512	/* size of console buffer */
-#define	CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
-#define	CFG_MAXARGS	15	/* max number of command args */
-#define	CFG_LONGHELP
-#define	CFG_LOAD_ADDR	0x12000000 /* default load address */
+#define	CONFIG_SYS_PROMPT	"U-Boot-mONStR> "
+#define	CONFIG_SYS_CBSIZE	512	/* size of console buffer */
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
+#define	CONFIG_SYS_MAXARGS	15	/* max number of command args */
+#define	CONFIG_SYS_LONGHELP
+#define	CONFIG_SYS_LOAD_ADDR	0x12000000 /* default load address */
 
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
@@ -262,8 +262,8 @@
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
-#define	CFG_USR_EXCEP	/* user exception */
-#define CFG_HZ	1000
+#define	CONFIG_SYS_USR_EXCEP	/* user exception */
+#define CONFIG_SYS_HZ	1000
 
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"