Merge branch 'next' of git://git.denx.de/u-boot-avr32

Conflicts:

	MAINTAINERS

1 files changed, 177 insertions, 0 deletions

diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
new file mode 100644
index 0000000..3486be0
--- /dev/null
+++ b/include/configs/mimc200.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Configuration settings for the AVR32 Network Gateway
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_MIMC200			1
+
+#define CONFIG_MIMC200_EXT_FLASH	1
+
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
+ * and the PBA bus to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			10000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			15
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CFG_CLKDIV_CPU			0
+#define CFG_CLKDIV_HSB			1
+#define CFG_CLKDIV_PBA			2
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#define CONFIG_USART1			1
+#define CONFIG_MIMC200_DBGLINK		1
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mtdblock1 fbmem=600k rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND						\
+	"fsload; bootm"
+
+#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
+#define CONFIG_SILENT_CONSOLE_INPUT	1	/* disable console inputs */
+#define CFG_DEVICE_NULLDEV		1	/* include nulldev device */
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		0
+#define CONFIG_ZERO_BOOTDELAY_CHECK 	1
+#define CONFIG_AUTOBOOT			1
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+#define CONFIG_NET_MULTI		1
+
+/*
+ * BOOTP/DHCP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+#define CONFIG_DOS_PARTITION		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_MACB			1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+
+#define CFG_FRAM_BASE			0x08000000
+#define CFG_FRAM_SIZE			0x20000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(1024*1024)
+#define CFG_DMA_ALLOC_LEN		(16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"U-Boot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */