rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 151 insertions, 151 deletions

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 7540c8e..e0dbd61 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -42,32 +42,32 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
-
-#define CFG_BOOT_BASE_ADDR	0xf0000000
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH_BASE		0xf8000000	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_LIME_BASE_0         0xc0000000
-#define CFG_LIME_BASE_1         0xc1000000
-#define CFG_LIME_BASE_2         0xc2000000
-#define CFG_LIME_BASE_3         0xc3000000
-#define CFG_FPGA_BASE_0         0xc4000000
-#define CFG_FPGA_BASE_1         0xc4200000
-#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
-#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE		0xf8000000	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_LIME_BASE_0         0xc0000000
+#define CONFIG_SYS_LIME_BASE_1         0xc1000000
+#define CONFIG_SYS_LIME_BASE_2         0xc2000000
+#define CONFIG_SYS_LIME_BASE_3         0xc3000000
+#define CONFIG_SYS_FPGA_BASE_0         0xc4000000
+#define CONFIG_SYS_FPGA_BASE_1         0xc4200000
+#define CONFIG_SYS_OCM_BASE		0xe0010000      /* ocm			*/
+#define CONFIG_SYS_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
@@ -78,41 +78,41 @@
  * content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
  * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.)
  */
-#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-#define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 						/* unused GPT0 COMP reg	*/
-#define CFG_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
+#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
 					/* 440EPx errata CHIP 11	*/
-#define CFG_OCM_SIZE		(16 << 10)
+#define CONFIG_SYS_OCM_SIZE		(16 << 10)
 
 /* Additional registers for watchdog timer post test */
 
-#define CFG_WATCHDOG_TIME_ADDR	(CFG_PERIPHERAL_BASE + GPT0_MASK2)
-#define CFG_WATCHDOG_FLAGS_ADDR	(CFG_PERIPHERAL_BASE + GPT0_MASK1)
-#define CFG_DSPIC_TEST_ADDR	CFG_WATCHDOG_FLAGS_ADDR
-#define CFG_OCM_STATUS_ADDR	CFG_WATCHDOG_FLAGS_ADDR
-#define CFG_WATCHDOG_MAGIC	0x12480000
-#define CFG_WATCHDOG_MAGIC_MASK	0xFFFF0000
-#define CFG_DSPIC_TEST_MASK	0x00000001
-#define CFG_OCM_STATUS_OK	0x00009A00
-#define CFG_OCM_STATUS_FAIL	0x0000A300
-#define CFG_OCM_STATUS_MASK	0x0000FF00
+#define CONFIG_SYS_WATCHDOG_TIME_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK2)
+#define CONFIG_SYS_WATCHDOG_FLAGS_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK1)
+#define CONFIG_SYS_DSPIC_TEST_ADDR	CONFIG_SYS_WATCHDOG_FLAGS_ADDR
+#define CONFIG_SYS_OCM_STATUS_ADDR	CONFIG_SYS_WATCHDOG_FLAGS_ADDR
+#define CONFIG_SYS_WATCHDOG_MAGIC	0x12480000
+#define CONFIG_SYS_WATCHDOG_MAGIC_MASK	0xFFFF0000
+#define CONFIG_SYS_DSPIC_TEST_MASK	0x00000001
+#define CONFIG_SYS_OCM_STATUS_OK	0x00009A00
+#define CONFIG_SYS_OCM_STATUS_FAIL	0x0000A300
+#define CONFIG_SYS_OCM_STATUS_MASK	0x0000FF00
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK		/* no external clock provided	*/
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external clock provided	*/
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI     1
 /* define this if you want console on UART1 */
 #define CONFIG_UART1_CONSOLE	1	/* use UART1 as console		*/
 
-#define CFG_BAUDRATE_TABLE						\
+#define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
@@ -123,27 +123,27 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 
-#define CFG_FLASH0		0xFC000000
-#define CFG_FLASH1		0xF8000000
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1, CFG_FLASH0 }
+#define CONFIG_SYS_FLASH0		0xFC000000
+#define CONFIG_SYS_FLASH1		0xF8000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
 #define CONFIG_ENV_SECT_SIZE	0x40000	/* size of one complete sector		*/
-#define CONFIG_ENV_ADDR		((-CFG_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
 #define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
@@ -153,32 +153,32 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM	(256)		/* 256MB			*/
-#define CFG_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
+#define CONFIG_SYS_MBYTES_SDRAM	(256)		/* 256MB			*/
+#define CONFIG_SYS_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
 #define CONFIG_DDR_DATA_EYE	1		/* use DDR2 optimization	*/
 #define CONFIG_DDR_ECC		1		/* enable ECC			*/
-#define CFG_POST_ECC_ON		CFG_POST_ECC
+#define CONFIG_SYS_POST_ECC_ON		CONFIG_SYS_POST_ECC
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE    | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_ECC_ON   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_FPU	   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_MEMORY   | \
-				 CFG_POST_OCM      | \
-				 CFG_POST_RTC      | \
-				 CFG_POST_SPR      | \
-				 CFG_POST_UART     | \
-				 CFG_POST_SYSMON   | \
-				 CFG_POST_WATCHDOG | \
-				 CFG_POST_DSP      | \
-				 CFG_POST_BSPEC1   | \
-				 CFG_POST_BSPEC2   | \
-				 CFG_POST_BSPEC3   | \
-				 CFG_POST_BSPEC4   | \
-				 CFG_POST_BSPEC5)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE    | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_ECC_ON   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_FPU	   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_OCM      | \
+				 CONFIG_SYS_POST_RTC      | \
+				 CONFIG_SYS_POST_SPR      | \
+				 CONFIG_SYS_POST_UART     | \
+				 CONFIG_SYS_POST_SYSMON   | \
+				 CONFIG_SYS_POST_WATCHDOG | \
+				 CONFIG_SYS_POST_DSP      | \
+				 CONFIG_SYS_POST_BSPEC1   | \
+				 CONFIG_SYS_POST_BSPEC2   | \
+				 CONFIG_SYS_POST_BSPEC3   | \
+				 CONFIG_SYS_POST_BSPEC4   | \
+				 CONFIG_SYS_POST_BSPEC5)
 
 #define CONFIG_POST_WATCHDOG  {\
 	"Watchdog timer test",				\
@@ -188,7 +188,7 @@
 	&lwmon5_watchdog_post_test,			\
 	NULL,						\
 	NULL,						\
-	CFG_POST_WATCHDOG				\
+	CONFIG_SYS_POST_WATCHDOG				\
 	}
 
 #define CONFIG_POST_BSPEC1    {\
@@ -199,7 +199,7 @@
 	&dspic_init_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC1					\
+	CONFIG_SYS_POST_BSPEC1					\
 	}
 
 #define CONFIG_POST_BSPEC2    {\
@@ -210,7 +210,7 @@
 	&dspic_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC2					\
+	CONFIG_SYS_POST_BSPEC2					\
 	}
 
 #define CONFIG_POST_BSPEC3    {\
@@ -221,7 +221,7 @@
 	&fpga_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC3					\
+	CONFIG_SYS_POST_BSPEC3					\
 	}
 
 #define CONFIG_POST_BSPEC4    {\
@@ -232,7 +232,7 @@
 	&gdc_post_test,					\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC4					\
+	CONFIG_SYS_POST_BSPEC4					\
 	}
 
 #define CONFIG_POST_BSPEC5    {\
@@ -243,35 +243,35 @@
 	&sysmon1_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC5					\
+	CONFIG_SYS_POST_BSPEC5					\
 	}
 
-#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
+#define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 #define CONFIG_LOGBUFFER
 /* Reserve GPT0_COMP1-COMP5 for logbuffer header */
-#define CONFIG_ALT_LH_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP1)
-#define CONFIG_ALT_LB_ADDR	(CFG_OCM_BASE)
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_ALT_LH_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
+#define CONFIG_ALT_LB_ADDR	(CONFIG_SYS_OCM_BASE)
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		100000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x53	/* EEPROM AT24C128		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel AT24C128 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x53	/* EEPROM AT24C128		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel AT24C128 has	*/
 					/* 64 byte page write mode using*/
 					/* last 6 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 #define CONFIG_RTC_PCF8563	1		/* enable Philips PCF8563 RTC	*/
-#define CFG_I2C_RTC_ADDR	0x51		/* Philips PCF8563 RTC address	*/
-#define CFG_I2C_KEYBD_ADDR	0x56		/* PIC LWE keyboard		*/
-#define CFG_I2C_DSPIC_IO_ADDR	0x57		/* PIC I/O addr               */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51		/* Philips PCF8563 RTC address	*/
+#define CONFIG_SYS_I2C_KEYBD_ADDR	0x56		/* PIC LWE keyboard		*/
+#define CONFIG_SYS_I2C_DSPIC_IO_ADDR	0x57		/* PIC I/O addr               */
 
 #define	CONFIG_POST_KEY_MAGIC	"3C+3E"	/* press F3 + F5 keys to force POST */
 #if 0
@@ -324,7 +324,7 @@
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
@@ -334,7 +334,7 @@
 #define CONFIG_PHY_RESET_DELAY	300
 
 #define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
@@ -411,30 +411,30 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SUPPORT_VFAT
 
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -448,14 +448,14 @@
 #define CONFIG_PCI			/* include pci support	        */
 #undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
-#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
 #define CONFIG_WD_PERIOD	40000	/* in usec */
@@ -466,74 +466,74 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_FLASH		CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
 
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x03050200
-#define CFG_EBC_PB0CR		(CFG_FLASH | 0xfc000)
+#define CONFIG_SYS_EBC_PB0AP		0x03050200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0xfc000)
 
 /* Memory Bank 1 (Lime) initialization						*/
-#define CFG_EBC_PB1AP		0x01004380
-#define CFG_EBC_PB1CR		(CFG_LIME_BASE_0 | 0xdc000)
+#define CONFIG_SYS_EBC_PB1AP		0x01004380
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_LIME_BASE_0 | 0xdc000)
 
 /* Memory Bank 2 (FPGA) initialization						*/
-#define CFG_EBC_PB2AP		0x01004400
-#define CFG_EBC_PB2CR		(CFG_FPGA_BASE_0 | 0x1c000)
+#define CONFIG_SYS_EBC_PB2AP		0x01004400
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_FPGA_BASE_0 | 0x1c000)
 
 /* Memory Bank 3 (FPGA2) initialization						*/
-#define CFG_EBC_PB3AP		0x01004400
-#define CFG_EBC_PB3CR		(CFG_FPGA_BASE_1 | 0x1c000)
+#define CONFIG_SYS_EBC_PB3AP		0x01004400
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_FPGA_BASE_1 | 0x1c000)
 
-#define CFG_EBC_CFG		0xb8400000
+#define CONFIG_SYS_EBC_CFG		0xb8400000
 
 /*-----------------------------------------------------------------------
  * Graphics (Fujitsu Lime)
  *----------------------------------------------------------------------*/
 /* SDRAM Clock frequency adjustment register */
-#define CFG_LIME_SDRAM_CLOCK	0xC1FC0038
+#define CONFIG_SYS_LIME_SDRAM_CLOCK	0xC1FC0038
 /* Lime Clock frequency is to set 100MHz */
-#define CFG_LIME_CLOCK_100MHZ	0x00000
+#define CONFIG_SYS_LIME_CLOCK_100MHZ	0x00000
 #if 0
 /* Lime Clock frequency for 133MHz */
-#define CFG_LIME_CLOCK_133MHZ	0x10000
+#define CONFIG_SYS_LIME_CLOCK_133MHZ	0x10000
 #endif
 
 /* SDRAM Parameter register */
-#define CFG_LIME_MMR		0xC1FCFFFC
+#define CONFIG_SYS_LIME_MMR		0xC1FCFFFC
 /* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
    and pixel flare on display when 133MHz was configured. According to
    SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
-#ifdef CFG_LIME_CLOCK_133MHZ
-#define CFG_LIME_MMR_VALUE	0x414FB7F3
+#ifdef CONFIG_SYS_LIME_CLOCK_133MHZ
+#define CONFIG_SYS_LIME_MMR_VALUE	0x414FB7F3
 #else
-#define CFG_LIME_MMR_VALUE	0x414FB7F2
+#define CONFIG_SYS_LIME_MMR_VALUE	0x414FB7F2
 #endif
 
 /*-----------------------------------------------------------------------
  * GPIO Setup
  *----------------------------------------------------------------------*/
-#define CFG_GPIO_PHY1_RST	12
-#define CFG_GPIO_FLASH_WP	14
-#define CFG_GPIO_PHY0_RST	22
-#define CFG_GPIO_DSPIC_READY	51
-#define CFG_GPIO_EEPROM_EXT_WP	55
-#define CFG_GPIO_HIGHSIDE	56
-#define CFG_GPIO_EEPROM_INT_WP	57
-#define CFG_GPIO_BOARD_RESET	58
-#define CFG_GPIO_LIME_S		59
-#define CFG_GPIO_LIME_RST	60
-#define CFG_GPIO_SYSMON_STATUS	62
-#define CFG_GPIO_WATCHDOG	63
+#define CONFIG_SYS_GPIO_PHY1_RST	12
+#define CONFIG_SYS_GPIO_FLASH_WP	14
+#define CONFIG_SYS_GPIO_PHY0_RST	22
+#define CONFIG_SYS_GPIO_DSPIC_READY	51
+#define CONFIG_SYS_GPIO_EEPROM_EXT_WP	55
+#define CONFIG_SYS_GPIO_HIGHSIDE	56
+#define CONFIG_SYS_GPIO_EEPROM_INT_WP	57
+#define CONFIG_SYS_GPIO_BOARD_RESET	58
+#define CONFIG_SYS_GPIO_LIME_S		59
+#define CONFIG_SYS_GPIO_LIME_RST	60
+#define CONFIG_SYS_GPIO_SYSMON_STATUS	62
+#define CONFIG_SYS_GPIO_WATCHDOG	63
 
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\