Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

1 files changed, 94 insertions, 1 deletions

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 3eac7ee..66954d0 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -35,6 +35,43 @@
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021atwr/ls102xa_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
+
+#define CONFIG_SPL_TEXT_BASE		0x10000000
+#define CONFIG_SPL_MAX_SIZE		0x1a000
+#define CONFIG_SPL_STACK		0x1001d000
+#define CONFIG_SPL_PAD_TO		0x1c000
+#define CONFIG_SYS_TEXT_BASE		0x82000000
+
+#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+#define CONFIG_SPL_BSS_START_ADDR	0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_MONITOR_LEN		0x80000
+#endif
+
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x67f80000
 #endif
@@ -50,13 +87,15 @@
 
 #define CONFIG_FSL_CAAM			/* Enable CAAM */
 
-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
 #endif
 
 /*
  * IFC Definitions
  */
+#ifndef CONFIG_QSPI_BOOT
 #define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
@@ -100,6 +139,7 @@
 
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 #define CONFIG_SYS_WRITE_SWAPPED_DATA
+#endif
 
 /* CPLD */
 
@@ -180,6 +220,21 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* QSPI */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_FSL_QSPI
+#define QSPI0_AMBA_BASE			0x40000000
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#endif
+
 /*
  * Video
  */
@@ -236,6 +291,13 @@
 #define CONFIG_HAS_ETH2
 #endif
 
+/* PCIe */
+#define CONFIG_PCI		/* Enable PCI/PCIE */
+#define CONFIG_PCIE1		/* PCIE controler 1 */
+#define CONFIG_PCIE2		/* PCIE controler 2 */
+#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -243,7 +305,20 @@
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
+
+#ifdef CONFIG_QSPI_BOOT
+#undef CONFIG_CMD_IMLS
+#else
 #define CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_SMP_PEN_ADDR		0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ		12500000
+#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
@@ -277,6 +352,8 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
+#define CONFIG_LS102XA_STREAM_ID
+
 /*
  * Stack sizes
  * The stack sizes are set up in start.S using the settings below
@@ -288,7 +365,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
 
 #define CONFIG_SYS_QE_FW_ADDR     0x67f40000
 
@@ -297,10 +378,22 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			0x20000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE			0x20000
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
+#endif
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP