powerpc/83xx: add kmcoge5ne board support

This board is a MPC8360 board. Two flashes are present
a NOR flash were u-boot and the u-boot environment is stored
and a NAND flash for the application code. This board has 512MB
SDRAM.

Additionaly we introduce a common km8360.h file and convert kmeter1 to
use this.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Christian Herzig <christian.herzig@keymile.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Gerlando Falauto <gerlando.falauto@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

1 files changed, 281 insertions, 0 deletions

diff --git a/include/configs/km8360.h b/include/configs/km8360.h
new file mode 100644
index 0000000..230b054
--- /dev/null
+++ b/include/configs/km8360.h
@@ -0,0 +1,281 @@
+/*
+ * (C) Copyright 2012
+ * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com>
+ * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* KMBEC FPGA (PRIO) */
+#define CONFIG_SYS_KMBEC_FPGA_BASE	0xE8000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE	64
+
+#if defined CONFIG_KMETER1
+#define CONFIG_HOSTNAME		kmeter1
+#define CONFIG_KM_BOARD_NAME   "kmeter1"
+#define CONFIG_KM_DEF_NETDEV	"netdev=eth2\0"
+#elif defined CONFIG_KMCOGE5NE
+#define CONFIG_HOSTNAME		kmcoge5ne
+#define CONFIG_KM_BOARD_NAME	"kmcoge5ne"
+#define CONFIG_KM_DEF_NETDEV	"netdev=eth1\0"
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define NAND_MAX_CHIPS				1
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT	"ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP	"ubi1"
+#define MTDIDS_DEFAULT			"nor0=boot,nand0=app"
+
+#define MTDPARTS_DEFAULT		"mtdparts="			\
+	"boot:"								\
+		"768k(u-boot),"						\
+		"128k(env),"						\
+		"128k(envred),"						\
+		"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"		\
+	"app:"								\
+		"-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
+#else
+#error ("Board not supported")
+#endif
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_QE			/* Has QE */
+#define CONFIG_MPC8360			/* MPC8360 CPU specific */
+
+#define	CONFIG_SYS_TEXT_BASE	0xF0000000
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km/km83xx-common.h"
+
+/*
+ * System IO Setup
+ */
+#define CONFIG_SYS_SICRH		(SICRH_UC1EOBI | SICRH_UC2E1OBI)
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_CSB_TO_CLKIN_4X1 | \
+	HRCWL_CORE_TO_CSB_2X1 | \
+	HRCWL_CE_PLL_VCO_DIV_2 | \
+	HRCWL_CE_TO_PLL_1X6)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+	HRCWH_CORE_ENABLE | \
+	HRCWH_FROM_0X00000100 | \
+	HRCWH_BOOTSEQ_DISABLE | \
+	HRCWH_SW_WATCHDOG_DISABLE | \
+	HRCWH_ROM_LOC_LOCAL_16BIT | \
+	HRCWH_BIG_ENDIAN | \
+	HRCWH_LALE_EARLY | \
+	HRCWH_LDP_CLEAR)
+
+/**
+ * DDR RAM settings
+ */
+#define CONFIG_SYS_DDR_SDRAM_CFG (\
+	SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+	SDRAM_CFG_SREN | \
+	SDRAM_CFG_HSE)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
+
+#ifdef CONFIG_KMCOGE5NE
+/**
+ * KMCOGE5NE has 512 MB RAM
+ */
+#define CONFIG_SYS_DDR_CS0_CONFIG (\
+	CSCONFIG_EN | \
+	CSCONFIG_AP | \
+	CSCONFIG_ODT_RD_ONLY_CURRENT | \
+	CSCONFIG_BANK_BIT_3 | \
+	CSCONFIG_ROW_BIT_13 | \
+	CSCONFIG_COL_BIT_10)
+#else
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_AP | \
+					 CSCONFIG_ROW_BIT_13 | \
+					 CSCONFIG_COL_BIT_10 | \
+					 CSCONFIG_ODT_RD_ONLY_CURRENT)
+#endif
+
+#define CONFIG_SYS_DDR_CLK_CNTL (\
+	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+
+#define CONFIG_SYS_DDR_INTERVAL (\
+	(0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+	(0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_BNDS			0x0000007f
+
+#define CONFIG_SYS_DDRCDR (\
+	DDRCDR_EN | \
+	DDRCDR_Q_DRN)
+#define CONFIG_SYS_DDR_MODE		0x47860452
+#define CONFIG_SYS_DDR_MODE2		0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0 (\
+	(2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+	(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+	(6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+	(2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+	(0 << TIMING_CFG0_WWT_SHIFT) | \
+	(0 << TIMING_CFG0_RRT_SHIFT) | \
+	(0 << TIMING_CFG0_WRT_SHIFT) | \
+	(0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1	((TIMING_CFG1_CASLAT_50) | \
+				 (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+				 (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+				 (3 << TIMING_CFG1_WRREC_SHIFT) | \
+				 (7 << TIMING_CFG1_REFREC_SHIFT) | \
+				 (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+				 (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+				 (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2 (\
+	(0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+	(3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+	(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+	(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+	(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+	(5 << TIMING_CFG2_CPO_SHIFT) | \
+	(0 << TIMING_CFG2_ADD_LAT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3			0x00000000
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP		LCRR_DBYP
+#define CONFIG_SYS_LCRR_EADC		LCRR_EADC_2
+#define CONFIG_SYS_LCRR_CLKDIV		LCRR_CLKDIV_4
+
+/*
+ * PAXE on the local bus CS3
+ */
+#define CONFIG_SYS_PAXE_BASE		0xA0000000
+#define CONFIG_SYS_PAXE_SIZE		256
+
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_PAXE_BASE
+
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000001C /* 512MB window size */
+
+#define CONFIG_SYS_BR3_PRELIM (\
+	CONFIG_SYS_PAXE_BASE | \
+	(1 << BR_PS_SHIFT) | \
+	BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (\
+	MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
+	OR_GPCM_CSNT | \
+	OR_GPCM_ACS_DIV2 | \
+	OR_GPCM_SCY_2 | \
+	OR_GPCM_TRLX | \
+	OR_GPCM_EAD)
+
+#ifdef CONFIG_KMCOGE5NE
+/*
+ * BFTIC3 on the local bus CS4
+ */
+#define CONFIG_SYS_BFTIC3_BASE			0xB0000000
+#define CONFIG_SYS_BFTIC3_SIZE			256
+
+#define CONFIG_SYS_BR4_PRELIM (\
+	CONFIG_SYS_BFTIC3_BASE |\
+	(1 << BR_PS_SHIFT) | \
+	BR_V)
+
+#define CONFIG_SYS_OR4_PRELIM (\
+	MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\
+	OR_GPCM_CSNT | \
+	OR_GPCM_ACS_DIV2 |\
+	OR_GPCM_SCY_2 |\
+	OR_GPCM_TRLX |\
+	OR_GPCM_EAD)
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* PAXE:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L (\
+	CONFIG_SYS_PAXE_BASE | \
+	BATL_PP_10 | \
+	BATL_MEMCOHERENCE)
+
+#define CONFIG_SYS_IBAT5U (\
+	CONFIG_SYS_PAXE_BASE | \
+	BATU_BL_256M | \
+	BATU_VS | \
+	BATU_VP)
+
+#define CONFIG_SYS_DBAT5L (\
+	CONFIG_SYS_PAXE_BASE | \
+	BATL_PP_10 | \
+	BATL_CACHEINHIBIT | \
+	BATL_GUARDEDSTORAGE)
+
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+
+
+#ifdef CONFIG_KMCOGE5NE
+/* BFTIC3:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT6L (\
+	CONFIG_SYS_BFTIC3_BASE | \
+	BATL_PP_10 | \
+	BATL_MEMCOHERENCE)
+
+#define CONFIG_SYS_IBAT6U (\
+	CONFIG_SYS_BFTIC3_BASE | \
+	BATU_BL_256M | \
+	BATU_VS | \
+	BATU_VP)
+
+#define CONFIG_SYS_DBAT6L (\
+	CONFIG_SYS_BFTIC3_BASE | \
+	BATL_PP_10 | \
+	BATL_CACHEINHIBIT | \
+	BATL_GUARDEDSTORAGE)
+
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+
+/* DDR/LBC SDRAM next 256M: cacheable */
+#define CONFIG_SYS_IBAT7L (\
+	CONFIG_SYS_SDRAM_BASE2 |\
+	BATL_PP_10 |\
+	BATL_CACHEINHIBIT |\
+	BATL_GUARDEDSTORAGE)
+
+#define CONFIG_SYS_IBAT7U (\
+	CONFIG_SYS_SDRAM_BASE2 |\
+	BATU_BL_256M |\
+	BATU_VS |\
+	BATU_VP)
+#else
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#endif
+
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
+
+#endif /* CONFIG */