Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	board/compulab/cm_t35/Makefile
	board/corscience/tricorder/Makefile
	board/ppcag/bg0900/Makefile
	drivers/bootcount/Makefile
	include/configs/omap4_common.h
	include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

	board/compulab/common/Makefile
	board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

	include/configs/am335x_igep0033.h
	include/configs/omap3_igep00x0.h

1 files changed, 22 insertions, 13 deletions

diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 3b5a1cd..fdd5680 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -121,13 +121,13 @@
 	(3 << DV_DDR_SDCR_IBANK_SHIFT) |	\
 	(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 
-#define CONFIG_SYS_DA850_CS3CFG	(DAVINCI_ABCR_WSETUP(2)	| \
+#define CONFIG_SYS_DA850_CS3CFG	(DAVINCI_ABCR_WSETUP(1)	| \
 				DAVINCI_ABCR_WSTROBE(2)	| \
-				DAVINCI_ABCR_WHOLD(1)	| \
+				DAVINCI_ABCR_WHOLD(0)	| \
 				DAVINCI_ABCR_RSETUP(1)	| \
-				DAVINCI_ABCR_RSTROBE(4)	| \
-				DAVINCI_ABCR_RHOLD(0)	| \
-				DAVINCI_ABCR_TA(1)	| \
+				DAVINCI_ABCR_RSTROBE(2)	| \
+				DAVINCI_ABCR_RHOLD(1)	| \
+				DAVINCI_ABCR_TA(0)	| \
 				DAVINCI_ABCR_ASIZE_8BIT)
 
 
@@ -160,6 +160,7 @@
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
+#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
@@ -172,11 +173,10 @@
 					CONFIG_SYS_MALLOC_LEN -       \
 					GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_NAND_ECCPOS		{				\
-				24, 25, 26, 27, 28, \
-				29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
-				39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
-				49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
-				59, 60, 61, 62, 63 }
+			6,   7,  8,  9, 10,	11, 12, 13, 14, 15,	\
+			22, 23, 24, 25, 26,	27, 28, 29, 30, 31,	\
+			38, 39, 40, 41, 42,	43, 44, 45, 46, 47,	\
+			54, 55, 56, 57, 58,	59, 60, 61, 62, 63}
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCSIZE		512
@@ -229,15 +229,24 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS		\
-	"mem=128M console=ttyS0,115200n8 root=/dev/mtdblock0p4 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	2
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
+		"root=/dev/mtdblock5 rw noinitrd " \
+		"rootfstype=jffs2 noinitrd\0" \
 	"hwconfig=dsp:wake=yes\0" \
+	"bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
+	"bootfile=uImage\0" \
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"	\
+	"mtddevname=uboot-env\0" \
+	"mtddevnum=0\0" \
 	"mtdids=" MTDIDS_DEFAULT "\0"				\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"			\
+	"u-boot=/tftpboot/ipam390/u-boot.ais\0"			\
+	"upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
+		"nand write c0000000 20000 ${filesize}\0"	\
 	"setbootparms=nand read c0100000 200000 400000;"	\
+		"run defbootargs addmtd;"			\
 		"spl export atags c0100000;"			\
 		"nand erase.part bootparms;"			\
 		"nand write c0000100 180000 20000\0"		\