arm, i.mx27: add support for magnesium board from projectiondesign

This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 4 insertions, 196 deletions

diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h
index ee749ec..72f6e80 100644
--- a/include/configs/imx27lite.h
+++ b/include/configs/imx27lite.h
@@ -20,158 +20,31 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
 /*
  * SoC Configuration
  */
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
-#define CONFIG_MX27
 #define CONFIG_IMX27LITE
-#define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
-#define CONFIG_SYS_HZ		1000
-
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
-		(ESDCFG_TRC(10) |	\
-		ESDCFG_TRCD(3) |	\
-		ESDCFG_TCAS(cas) |	\
-		ESDCFG_TRRD(1) |	\
-		ESDCFG_TRAS(5) |	\
-		ESDCFG_TWR |		\
-		ESDCFG_TMRD(2) |	\
-		ESDCFG_TRP(2) |		\
-		ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL	\
-		(ESDCTL_PRCT(0) |	\
-		 ESDCTL_BL |		\
-		 ESDCTL_PWDT(0) |	\
-		 ESDCTL_SREFR(3) |	\
-		 ESDCTL_DSIZ_32 |	\
-		 ESDCTL_COL10 |		\
-		 ESDCTL_ROW13 |		\
-		 ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL		0xf00
-
-#define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
-
-#define MPCTL0_VAL	0x1ef15d5
-
-#define SPCTL0_VAL	0x043a1c09
-
-#define CSCR_VAL	0x33f08107
-
-#define PCDR0_VAL	0x120470c3
-#define PCDR1_VAL	0x03030303
-#define PCCR0_VAL	0xffffffff
-#define PCCR1_VAL	0xfffffffc
-
-#define AIPI1_PSR0_VAL	0x20040304
-#define AIPI1_PSR1_VAL	0xdffbfcfb
-#define AIPI2_PSR0_VAL	0x07ffc200
-#define AIPI2_PSR1_VAL	0xffffffff
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
-/* reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-/* memtest start address */
-#define CONFIG_SYS_MEMTEST_START	0xA0000000
-#define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE	(256 * 1024)	/* regular stack */
-#define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
-#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_HOSTNAME		imx27
+#define CONFIG_BOARDNAME	"LogicPD imx27lite\n"
 
 /*
  * Flash & Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-/* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION		1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ	0x2000	/* 8KB sect size Intel Flash */
-/* end of flash */
 #define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - 0x20000)
-/* CS2 Base address */
-#define PHYS_FLASH_1			0xc0000000
-/* Flash Base for U-Boot */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-/* Flash size 2MB */
 #define PHYS_FLASH_SIZE			0x200000
-#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
-		CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
 #define CONFIG_ENV_SECT_SIZE		0x10000		/* Env sector Size */
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR		0x1f
-#define CONFIG_MII
-#define CONFIG_NET_MULTI
-
-/*
- * MTD
- */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
-
-/*
- * NAND
- */
-#define CONFIG_NAND_MXC
-#define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0xd8000000
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 /*
  * SD/MMC
  */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXC_MMC
 #define CONFIG_MXC_MCI_REGS_BASE	0x10014000
-#define CONFIG_DOS_PARTITION
 
 /*
  * MTD partitions
  */
-#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=mxc_nand.0"
 #define MTDPARTS_DEFAULT			\
 	"mtdparts="				\
@@ -186,69 +59,4 @@
 			"22m(rootfs),"		\
 			"-(userfs)"
 
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-		sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-#define xstr(s)	str(s)
-#define str(s)	#s
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"u-boot=imx27/u-boot.bin\0"					\
-	"kernel_addr_r=a0800000\0"					\
-	"hostname=imx27\0"						\
-	"bootfile=imx27/uImage\0"					\
-	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm\0"						\
-	"bootcmd=run net_nfs\0"					\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
-		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
-		" +${filesize};cp.b ${fileaddr} "			\
-		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
-	"upd=run load update\0"						\
-
 #endif /* __CONFIG_H */