summaryrefslogtreecommitdiff
path: root/include/configs/gw8260.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:38:21 +0000
committerwdenk <wdenk>2002-11-03 00:38:21 +0000
commitfe8c2806cdba70479e351299881a395dc2be7785 (patch)
treea1e8b98a1838cba6e6f5c765d9d85339257c45f5 /include/configs/gw8260.h
parentf9087a3213cc245cf9b90436475b5af822bd7579 (diff)
downloadu-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.zip
u-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.tar.gz
u-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.tar.bz2
Initial revision
Diffstat (limited to 'include/configs/gw8260.h')
-rw-r--r--include/configs/gw8260.h820
1 files changed, 820 insertions, 0 deletions
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
new file mode 100644
index 0000000..0e9a4ec
--- /dev/null
+++ b/include/configs/gw8260.h
@@ -0,0 +1,820 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jmonkman@adventnetworks.com>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Oliver Brown <obrown@adventnetworks.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*********************************************************************/
+/* DESCRIPTION:
+ * This file contains the board configuartion for the GW8260 board.
+ *
+ * MODULE DEPENDENCY:
+ * None
+ *
+ * RESTRICTIONS/LIMITATIONS:
+ * None
+ *
+ * Copyright (c) 2001, Advent Networks, Inc.
+ */
+/*********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Enable debug prints */
+#undef DEBUG /* General debug */
+#undef DEBUG_BOOTP_EXT /* Debug received vendor fields */
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN (66 * 1000 * 1000)
+
+/*-----------------------------------------------------------------------
+ * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
+ *-----------------------------------------------------------------------
+ * What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Here are some example values (all frequencies are in MHz):
+ *
+ * MODCK_H MODCK[1-3] Osc CPM Core S2-6 S2-7 S2-8
+ * ------- ---------- --- --- ---- ----- ----- -----
+ * 0x5 0x5 66 133 133 Open Close Open
+ * 0x5 0x6 66 133 166 Open Open Close
+ * 0x5 0x7 66 133 200 Open Open Open
+ * 0x6 0x0 66 133 233 Close Close Close
+ * 0x6 0x1 66 133 266 Close Close Open
+ * 0x6 0x2 66 133 300 Close Open Close
+ */
+#define CFG_SBC_MODCK_H 0x05
+
+/* Define this if you want to boot from 0x00000100. If you don't define
+ * this, you will need to program the bootloader to 0xfff00000, and
+ * get the hardware reset config words at 0xfe000000. The simplest
+ * way to do that is to program the bootloader at both addresses.
+ * It is suggested that you just let U-Boot live at 0x00000000.
+ */
+#define CFG_SBC_BOOT_LOW 1
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * The main FLASH is whichever is connected to *CS0. U-Boot expects
+ * this to be the SIMM.
+ */
+#define CFG_FLASH0_BASE 0x40000000
+#define CFG_FLASH0_SIZE 8
+
+/* Define CFG_FLASH_CHECKSUM to enable flash checksum during boot.
+ * Note: the 'flashchecksum' environment variable must also be set to 'y'.
+ */
+#define CFG_FLASH_CHECKSUM
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?
+ */
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 64
+
+/*
+ * DRAM tests
+ * CFG_DRAM_TEST - enables the following tests.
+ *
+ * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ * Environment variable 'test_dram_data' must be
+ * set to 'y'.
+ * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ * addressable. Environment variable
+ * 'test_dram_address' must be set to 'y'.
+ * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ * This test takes about 6 minutes to test 64 MB.
+ * Environment variable 'test_dram_walk' must be
+ * set to 'y'.
+ */
+#define CFG_DRAM_TEST
+#if defined(CFG_DRAM_TEST)
+#define CFG_DRAM_TEST_DATA
+#define CFG_DRAM_TEST_ADDRESS
+#define CFG_DRAM_TEST_WALK
+#endif /* CFG_DRAM_TEST */
+
+/*
+ * GW8260 with 16 MB DIMM:
+ *
+ * 0x0000 0000 Exception Vector code, 8k
+ * :
+ * 0x0000 1FFF
+ * 0x0000 2000 Free for Application Use
+ * :
+ * :
+ *
+ * :
+ * :
+ * 0x00F5 FF30 Monitor Stack (Growing downward)
+ * Monitor Stack Buffer (0x80)
+ * 0x00F5 FFB0 Board Info Data
+ * 0x00F6 0000 Malloc Arena
+ * : CFG_ENV_SECT_SIZE, 256k
+ * : CFG_MALLOC_LEN, 128k
+ * 0x00FC 0000 RAM Copy of Monitor Code
+ * : CFG_MONITOR_LEN, 256k
+ * 0x00FF FFFF [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+/*
+ * GW8260 with 64 MB DIMM:
+ *
+ * 0x0000 0000 Exception Vector code, 8k
+ * :
+ * 0x0000 1FFF
+ * 0x0000 2000 Free for Application Use
+ * :
+ * :
+ *
+ * :
+ * :
+ * 0x03F5 FF30 Monitor Stack (Growing downward)
+ * Monitor Stack Buffer (0x80)
+ * 0x03F5 FFB0 Board Info Data
+ * 0x03F6 0000 Malloc Arena
+ * : CFG_ENV_SECT_SIZE, 256k
+ * : CFG_MALLOC_LEN, 128k
+ * 0x03FC 0000 RAM Copy of Monitor Code
+ * : CFG_MONITOR_LEN, 256k
+ * 0x03FF FFFF [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ */
+#define CONFIG_CONS_ON_SMC 1 /* define if console on SMC */
+#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on neither */
+#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+
+#undef CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_ON_FCC
+#undef CONFIG_ETHER_NONE /* define if ethernet on neither */
+
+#ifdef CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
+#endif /* CONFIG_ETHER_ON_SCC */
+
+#ifdef CONFIG_ETHER_ON_FCC
+#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
+/*
+ * Port pins used for bit-banged MII communictions (if applicable).
+ */
+#define MDIO_PORT 2 /* Port C */
+#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
+#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
+#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
+
+#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
+ else iop->pdat &= ~0x00400000
+
+#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
+ else iop->pdat &= ~0x00200000
+
+#define MIIDELAY udelay(1)
+#endif /* CONFIG_ETHER_ON_FCC */
+
+#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE 0
+# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
+
+/*
+ * - Rx-CLK is CLK15
+ * - Tx-CLK is CLK16
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CFG_CPMFCR_RAMTYPE 0
+# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
+
+/* Define this to reserve an entire FLASH sector (256 KB) for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* What should the console's baud rate be? */
+#define CONFIG_BAUDRATE 115200
+
+/* Ethernet MAC address - This is set to all zeros to force an
+ * an error if we use BOOTP without setting
+ * the MAC address
+ */
+#define CONFIG_ETHADDR 00:00:00:00:00:00
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+/* Be selective on what keys can delay or stop the autoboot process
+ * To stop use: " "
+ */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define DEBUG_BOOTKEYS 0
+
+/* Add support for a few extra bootp options like:
+ * - File size
+ * - DNS
+ */
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE | \
+ CONFIG_BOOTP_DNS)
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT "=> "
+
+/* What U-Boot subsytems do you want enabled? */
+#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_IMMAP | \
+ CFG_CMD_MII)
+
+/* Where do the internal registers live? */
+#define CFG_IMMR 0xf0000000
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* What is the address of IO controller */
+#define CFG_IO_BASE 0xe0000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
+#define CONFIG_GW8260 1 /* on an GW8260 Board */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS 8 /* max number of command args */
+
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Convert clocks to MHZ when passing board info to kernel.
+ * This must be defined for eariler 2.4 kernels (~2.4.4).
+ */
+#define CONFIG_CLOCKS_IN_MHZ
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+
+/* memtest works from the end of the exception vector table
+ * to the end of the DRAM less monitor and malloc area
+ */
+#define CFG_MEMTEST_START 0x2000
+
+#define CFG_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */
+
+#define CFG_MEM_END_USAGE ( CFG_MONITOR_LEN \
+ + CFG_MALLOC_LEN \
+ + CFG_ENV_SECT_SIZE \
+ + CFG_STACK_USAGE )
+
+#define CFG_MEMTEST_END ( CFG_SDRAM_SIZE * 1024 * 1024 \
+ - CFG_MEM_END_USAGE )
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_FLASH_BASE CFG_FLASH0_BASE
+#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CFG_SDRAM_BASE CFG_SDRAM0_BASE
+#define CFG_SDRAM_SIZE CFG_SDRAM0_SIZE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+#if defined(CFG_SBC_BOOT_LOW)
+# define CFG_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS)
+#else
+# define CFG_SBC_HRCW_BOOT_FLAGS (0)
+#endif /* defined(CFG_SBC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) | \
+ ((CFG_IMMR & 0x01000000) >> 7) | \
+ ((CFG_IMMR & 0x00100000) >> 4) )
+
+#define CFG_HRCW_MASTER ( HRCW_BPS11 | \
+ HRCW_DPPC11 | \
+ CFG_SBC_HRCW_IMMR | \
+ HRCW_MMR00 | \
+ HRCW_LBPC11 | \
+ HRCW_APPC10 | \
+ HRCW_CS10PC00 | \
+ (CFG_SBC_MODCK_H & HRCW_MODCK_H1111) | \
+ CFG_SBC_HRCW_BOOT_FLAGS )
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE CFG_FLASH0_BASE
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+#ifdef CFG_ENV_IN_OWN_SECT
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE + (256 * 1024))
+# define CFG_ENV_SECT_SIZE (256 * 1024)
+#else
+# define CFG_ENV_SIZE (16 * 1024)/* Size of Environment Sector */
+# define CFG_ENV_ADD ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) - CFG_ENV_SIZE)
+# define CFG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size */
+#endif /* CFG_ENV_IN_OWN_SECT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT (HID0_ICE |\
+ HID0_DCE |\
+ HID0_ICFI |\
+ HID0_DCI |\
+ HID0_IFEM |\
+ HID0_ABE)
+
+#define CFG_HID0_FINAL (HID0_ICE |\
+ HID0_IFEM |\
+ HID0_ABE |\
+ HID0_EMCP)
+#define CFG_HID2 0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR 0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR (BCR_ETM)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 4-31
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR (SIUMCR_DPPC11 |\
+ SIUMCR_L2CPC00 |\
+ SIUMCR_APPC10 |\
+ SIUMCR_MMR00)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#define CFG_SYPCR (SYPCR_SWTC |\
+ SYPCR_BMT |\
+ SYPCR_PBME |\
+ SYPCR_LBME |\
+ SYPCR_SWRI |\
+ SYPCR_SWP)
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC (TMCNTSC_SEC |\
+ TMCNTSC_ALR |\
+ TMCNTSC_TCF |\
+ TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR (PISCR_PS |\
+ PISCR_PTF |\
+ PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control 9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR 0
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR 0
+
+/*
+ * Initialize Memory Controller:
+ *
+ * Bank Bus Machine PortSz Device
+ * ---- --- ------- ------ ------
+ * 0 60x GPCM 32 bit FLASH (SIMM - 4MB)
+ * 1 60x GPCM 32 bit unused
+ * 2 60x SDRAM 64 bit SDRAM (DIMM - 16MB or 64MB)
+ * 3 60x SDRAM 64 bit unused
+ * 4 Local GPCM 8 bit IO (on board - 64k)
+ * 5 60x GPCM 8 bit unused
+ * 6 60x GPCM 8 bit unused
+ * 7 60x GPCM 8 bit unused
+ *
+ */
+
+/*-----------------------------------------------------------------------
+ * BR0 - Base Register
+ * Ref: Section 10.3.1 on page 10-14
+ * OR0 - Option Register
+ * Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 0,1 - FLASH SIMM
+ *
+ * This expects the FLASH SIMM to be connected to *CS0
+ * It consists of 4 AM29F016D parts.
+ *
+ * Note: For the 8 MB SIMM, *CS1 is unused.
+ */
+
+/* BR0 is configured as follows:
+ *
+ * - Base address of 0x40000000
+ * - 32 bit port size
+ * - Data errors checking is disabled
+ * - Read and write access
+ * - GPCM 60x bus
+ * - Access are handled by the memory controller according to MSEL
+ * - Not used for atomic operations
+ * - No data pipelining is done
+ * - Valid
+ */
+#define CFG_BR0_PRELIM ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+ BRx_PS_32 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+/* OR0 is configured as follows:
+ *
+ * - 8 MB
+ * - *BCTL0 is asserted upon access to the current memory bank
+ * - *CW / *WE are negated a quarter of a clock earlier
+ * - *CS is output at the same time as the address lines
+ * - Uses a clock cycle length of 5
+ * - *PSDVAL is generated internally by the memory controller
+ * unless *GTA is asserted earlier externally.
+ * - Relaxed timing is generated by the GPCM for accesses
+ * initiated to this memory region.
+ * - One idle clock is inserted between a read access from the
+ * current bank and the next access.
+ */
+#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV1 |\
+ ORxG_SCY_5_CLK |\
+ ORxG_TRLX |\
+ ORxG_EHTR)
+
+/*-----------------------------------------------------------------------
+ * BR2 - Base Register
+ * Ref: Section 10.3.1 on page 10-14
+ * OR2 - Option Register
+ * Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 2 - SDRAM DIMM
+ *
+ * 16MB DIMM: P/N
+ * 64MB DIMM: P/N 1W-8864X8-4-P1-EST or
+ * MT4LSDT864AG-10EB1 (Micron)
+ *
+ * Note: *CS3 is unused for this DIMM
+ */
+
+/* With a 16 MB or 64 MB DIMM, the BR2 is configured as follows:
+ *
+ * - Base address of 0x00000000
+ * - 64 bit port size (60x bus only)
+ * - Data errors checking is disabled
+ * - Read and write access
+ * - SDRAM 60x bus
+ * - Access are handled by the memory controller according to MSEL
+ * - Not used for atomic operations
+ * - No data pipelining is done
+ * - Valid
+ */
+#define CFG_BR2_PRELIM ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+/* With a 16 MB DIMM, the OR2 is configured as follows:
+ *
+ * - 16 MB
+ * - 2 internal banks per device
+ * - Row start address bit is A9 with PSDMR[PBI] = 0
+ * - 11 row address lines
+ * - Back-to-back page mode
+ * - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 16)
+#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+ ORxS_BPD_2 |\
+ ORxS_ROWST_PBI0_A9 |\
+ ORxS_NUMR_11)
+
+/* With a 16 MB DIMM, the PSDMR is configured as follows:
+ *
+ * - Page Based Interleaving,
+ * - Refresh Enable,
+ * - Address Multiplexing where A5 is output on A14 pin
+ * (A6 on A15, and so on),
+ * - use address pins A16-A18 as bank select,
+ * - A9 is output on SDA10 during an ACTIVATE command,
+ * - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ * - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ * is 3 clocks,
+ * - earliest timing for READ/WRITE command after ACTIVATE command is
+ * 2 clocks,
+ * - earliest timing for PRECHARGE after last data was read is 1 clock,
+ * - earliest timing for PRECHARGE after last data was written is 1 clock,
+ * - CAS Latency is 2.
+ */
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ * Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+#define CFG_PSDMR (PSDMR_RFEN |\
+ PSDMR_SDAM_A14_IS_A5 |\
+ PSDMR_BSMA_A16_A18 |\
+ PSDMR_SDA10_PBI0_A9 |\
+ PSDMR_RFRC_7_CLK |\
+ PSDMR_PRETOACT_3W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_1C |\
+ PSDMR_CL_2)
+#endif /* (CFG_SDRAM0_SIZE == 16) */
+
+/* With a 64 MB DIMM, the OR2 is configured as follows:
+ *
+ * - 64 MB
+ * - 4 internal banks per device
+ * - Row start address bit is A8 with PSDMR[PBI] = 0
+ * - 12 row address lines
+ * - Back-to-back page mode
+ * - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 64)
+#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI0_A8 |\
+ ORxS_NUMR_12)
+
+/* With a 64 MB DIMM, the PSDMR is configured as follows:
+ *
+ * - Page Based Interleaving,
+ * - Refresh Enable,
+ * - Address Multiplexing where A5 is output on A14 pin
+ * (A6 on A15, and so on),
+ * - use address pins A14-A16 as bank select,
+ * - A9 is output on SDA10 during an ACTIVATE command,
+ * - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ * - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ * is 3 clocks,
+ * - earliest timing for READ/WRITE command after ACTIVATE command is
+ * 2 clocks,
+ * - earliest timing for PRECHARGE after last data was read is 1 clock,
+ * - earliest timing for PRECHARGE after last data was written is 1 clock,
+ * - CAS Latency is 2.
+ */
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ * Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+#define CFG_PSDMR (PSDMR_RFEN |\
+ PSDMR_SDAM_A14_IS_A5 |\
+ PSDMR_BSMA_A14_A16 |\
+ PSDMR_SDA10_PBI0_A9 |\
+ PSDMR_RFRC_7_CLK |\
+ PSDMR_PRETOACT_3W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_1C |\
+ PSDMR_CL_2)
+#endif /* (CFG_SDRAM0_SIZE == 64) */
+
+#define CFG_PSRT 0x0e
+#define CFG_MPTPR MPTPR_PTP_DIV32
+
+
+/*-----------------------------------------------------------------------
+ * BR4 - Base Register
+ * Ref: Section 10.3.1 on page 10-14
+ * OR4 - Option Register
+ * Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+/* Bank 4 - Onboard Memory Mapped IO controller
+ *
+ * This expects the onboard IO controller to connected to *CS4 and
+ * the local bus.
+ * - Base address of 0xe0000000
+ * - 8 bit port size (local bus only)
+ * - Read and write access
+ * - GPCM local bus
+ * - Not used for atomic operations
+ * - No data pipelining is done
+ * - Valid
+ * - extended hold time
+ * - 11 wait states
+ */
+
+#ifdef CFG_IO_BASE
+# define CFG_BR4_PRELIM ((CFG_IO_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 |\
+ BRx_MS_GPCM_L |\
+ BRx_V)
+
+# define CFG_OR4_PRELIM (ORxG_AM_MSK |\
+ ORxG_SCY_11_CLK |\
+ ORxG_EHTR)
+#endif /* CFG_IO_BASE */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */