rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 72 insertions, 72 deletions

diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 5a7a580..bbe635b 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -61,13 +61,13 @@
 #define CONFIG_SYS_CLK_FREQ	20000000	/* 20MHz */
 
 /* Number of SPARC register windows */
-#define CFG_SPARC_NWINDOWS 8
+#define CONFIG_SYS_SPARC_NWINDOWS 8
 
 /*
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -192,28 +192,28 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-/*#define CFG_NO_FLASH		1*/
-#define CFG_FLASH_BASE		0x00000000
-#define CFG_FLASH_SIZE		0x00800000
+/*#define CONFIG_SYS_NO_FLASH		1*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 
 /*** CFI CONFIG ***/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 /* Bypass cache when reading regs from flash memory */
-#define CFG_FLASH_CFI_BYPASS_READ
+#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
 /* Buffered writes (32byte/go) instead of single accesses */
-#define CFG_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * Environment settings
@@ -223,7 +223,7 @@
 /* CONFIG_ENV_ADDR need to be at sector boundary */
 #define CONFIG_ENV_SIZE		0x8000
 #define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR		(CFG_FLASH_BASE+CFG_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
@@ -235,59 +235,59 @@
  */
 
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
 #else
-#define CFG_SDRAM_BASE		0x60000000
+#define CONFIG_SYS_SDRAM_BASE		0x60000000
 #endif
 
-#define CFG_SDRAM_SIZE		0x08000000
-#define CFG_SDRAM_END		(CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_SIZE		0x08000000
+#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
 
 /* 4Mb SRAM available */
 #if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_SRAM_BASE 0x40000000
-#define CFG_SRAM_SIZE 0x400000
-#define CFG_SRAM_END  (CFG_SRAM_BASE+CFG_SRAM_SIZE)
+#define CONFIG_SYS_SRAM_BASE 0x40000000
+#define CONFIG_SYS_SRAM_SIZE 0x400000
+#define CONFIG_SYS_SRAM_END  (CONFIG_SYS_SRAM_BASE+CONFIG_SYS_SRAM_SIZE)
 #endif
 
 /* Select RAM used to run U-BOOT from... */
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
-#define CFG_RAM_BASE CFG_SRAM_BASE
-#define CFG_RAM_SIZE CFG_SRAM_SIZE
-#define CFG_RAM_END CFG_SRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SRAM_END
 #else
-#define CFG_RAM_BASE CFG_SDRAM_BASE
-#define CFG_RAM_SIZE CFG_SDRAM_SIZE
-#define CFG_RAM_END CFG_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 #endif
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_PROM_SIZE		(8192-CFG_GBL_DATA_SIZE)
-#define CFG_PROM_OFFSET		(CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+#define CONFIG_SYS_PROM_SIZE		(8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
-#define CFG_INIT_SP_OFFSET	(CFG_PROM_OFFSET-32)
-#define CFG_STACK_SIZE		(0x10000-32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
+#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MALLOC_END		(CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
-#define CFG_MALLOC_BASE		(CFG_MALLOC_END-CFG_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
 
 /* relocated monitor area */
-#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
-#define CFG_RELOC_MONITOR_BASE     (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
+#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
 
 /*
  * Ethernet configuration uses on board SMC91C111
@@ -305,23 +305,23 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory     */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Various low-level settings
@@ -337,38 +337,38 @@
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 /* AMBA Plug & Play info display on startup */
-/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
 
-#define CFG_GRLIB_SDRAM    0
+#define CONFIG_SYS_GRLIB_SDRAM    0
 
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CFG_GRLIB_MEMCFG1   (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_MEMCFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
 #else
-#define CFG_GRLIB_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x82205260
 #endif
-#define CFG_GRLIB_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_MEMCFG3   0x0809a000
 
-#define CFG_GRLIB_FT_MEMCFG1   (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_GRLIB_FT_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
 #else
-#define CFG_GRLIB_FT_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82205260
 #endif
-#define CFG_GRLIB_FT_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x0809a000
 
 /* no DDR controller */
-#define CFG_GRLIB_DDR_CFG   0x00000000
+#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
 
 /* no DDR2 Controller */
-#define CFG_GRLIB_DDR2_CFG1 0x00000000
-#define CFG_GRLIB_DDR2_CFG3 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
 
 /* Calculate scaler register value from default baudrate */
-#define CFG_GRLIB_APBUART_SCALER \
+#define CONFIG_SYS_GRLIB_APBUART_SCALER \
  ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* Identification string */