Add missing Blackfin files.

1 files changed, 188 insertions, 0 deletions

diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h
new file mode 100644
index 0000000..a52af4e
--- /dev/null
+++ b/include/configs/ezkit533.h
@@ -0,0 +1,188 @@
+#ifndef __CONFIG_EZKIT533_H__
+#define __CONFIG_EZKIT533_H__
+
+#define CFG_LONGHELP		1
+#define CONFIG_BAUDRATE		57600
+#define CONFIG_STAMP		1
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x20310300
+#if 0
+#define	CONFIG_MII
+#define CFG_DISCOVER_PHY
+#endif
+
+#define CONFIG_RTC_BF533	1
+#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
+
+/* CONFIG_CLKIN_HZ is any value in Hz                            */
+#define CONFIG_CLKIN_HZ          27000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
+/*                                                  1=CLKIN/2    */
+#define CONFIG_CLKIN_HALF               0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
+/*                                               1=bypass PLL    */
+#define CONFIG_PLL_BYPASS               0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
+/* Values can range from 1-64                                    */
+#define CONFIG_VCO_MULT			22
+/* CONFIG_CCLK_DIV controls what the core clock divider is       */
+/* Values can be 1, 2, 4, or 8 ONLY                              */
+#define CONFIG_CCLK_DIV			1
+/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
+/* Values can range from 1-15                                    */
+#define CONFIG_SCLK_DIV			5
+
+#if ( CONFIG_CLKIN_HALF == 0 )
+#define CONFIG_VCO_HZ           ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#else
+#define CONFIG_VCO_HZ           (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#endif
+
+#if (CONFIG_PLL_BYPASS == 0)
+#define CONFIG_CCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#else
+#define CONFIG_CCLK_HZ          CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ          CONFIG_CLKIN_HZ
+#endif
+
+#define CONFIG_MEM_SIZE                 32             /* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH              9             /* 8, 9, 10, 11    */
+#define CONFIG_MEM_MT48LC16M16A2TG_75    1
+
+#define CONFIG_LOADS_ECHO	1
+
+
+#define CONFIG_COMMANDS			(CONFIG_CMD_DFL	| \
+					 CFG_CMD_PING	| \
+					 CFG_CMD_ELF	| \
+					 CFG_CMD_I2C	| \
+					 CFG_CMD_JFFS2	| \
+					 CFG_CMD_DATE)
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off"	
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define	CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#else
+#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#endif
+#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define	CFG_MAXARGS		16	/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x01F00000	/* 1 ... 31 MB in DRAM */
+#define	CFG_LOAD_ADDR		0x01000000	/* default load address */
+#define	CFG_HZ			1000	/* decrementer freq: 10 ms ticks */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_MAX_RAM_SIZE	0x02000000
+#define CFG_FLASH_BASE		0x20000000
+
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_SIZE	0x4000
+#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_FLASH0_BASE		0x20000000
+#define CFG_FLASH1_BASE		0x20200000
+#define CFG_FLASH2_BASE		0x20280000
+#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	40	/* max number of sectors on one chip */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x20020000
+#define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+
+/* JFFS Partition offset set  */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_NUM_BANKS  1
+/* 512k reserved for u-boot */
+#define CFG_JFFS2_FIRST_SECTOR                 11
+
+
+/*
+ * Stack sizes
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+
+#define POLL_MODE		1
+#define FLASH_TOT_SECT		40
+#define FLASH_SIZE		0x220000
+#define CFG_FLASH_SIZE		0x220000
+
+/*
+ * Initialize PSD4256 registers for using I2C
+ */
+#define	CONFIG_MISC_INIT_R
+
+/*
+ * I2C settings
+ * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
+ */
+#define CONFIG_SOFT_I2C			1	/* I2C bit-banged		*/
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PF_SCL				PF0
+#define PF_SDA				PF1
+
+#define I2C_INIT			(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE			(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE			(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ			((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
+#define I2C_SDA(bit)			if(bit) { \
+							*pFIO_FLAG_S = PF_SDA; \
+							asm("ssync;"); \
+						} \
+					else    { \
+							*pFIO_FLAG_C = PF_SDA; \
+							asm("ssync;"); \
+						}
+#define I2C_SCL(bit)			if(bit) { \
+							*pFIO_FLAG_S = PF_SCL; \
+							asm("ssync;"); \
+						} \
+					else    { \
+							*pFIO_FLAG_C = PF_SCL; \
+							asm("ssync;"); \
+						}
+#define I2C_DELAY			udelay(5)	/* 1/4 I2C clock duration */
+
+#define CFG_I2C_SPEED			50000
+#define CFG_I2C_SLAVE			0xFE
+
+
+#define __ADSPLPBLACKFIN__	1
+#define __ADSPBF533__		1
+
+/* 0xFF, 0x7BB07BB0, 0x22547BB0 */
+/* #define AMGCTLVAL            (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL              (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL |    \
+                                ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
+#define AMBCTL1VAL              (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN |   \
+                                B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
+*/
+#define AMGCTLVAL               0xFF
+#define AMBCTL0VAL              0x7BB07BB0
+#define AMBCTL1VAL              0xFFC27BB0
+
+#define CONFIG_VDSP		1
+
+#ifdef CONFIG_VDSP
+#define ET_EXEC_VDSP		0x8
+#define SHT_STRTAB_VDSP		0x1
+#define ELFSHDRSIZE_VDSP	0x2C
+#define VDSP_ENTRY_ADDR		0xFFA00000
+#endif
+
+#endif