Sync'd u-boot-net with mainline

Merge git://www.denx.de/git/u-boot

Conflicts:

	drivers/bcm570x.c
	drivers/tigon3.c

1 files changed, 37 insertions, 25 deletions

diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a77ccef..4febd32 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -60,8 +60,8 @@
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
@@ -108,22 +108,34 @@
 
 #define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL   \
-				| CFG_CMD_DHCP    \
-				| CFG_CMD_ECHO    \
-				| CFG_CMD_I2C     \
-				| CFG_CMD_IMMAP   \
-				| CFG_CMD_MII     \
-				| CFG_CMD_PING    \
-				| CFG_CMD_DATE    \
-				| CFG_CMD_DTT	  \
-				| CFG_CMD_EEPROM  \
-				| CFG_CMD_PCI	  \
-				| CFG_CMD_DIAG	  \
-				)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DIAG
+
 
 #define CONFIG_ETHADDR		00:10:EC:00:88:65
 #define CONFIG_HAS_ETH1
@@ -138,7 +150,7 @@
 #define CONFIG_AUTO_COMPLETE	1
 #define	CONFIG_EXTRA_ENV_SETTINGS	"ethprime=FCC3 ETHERNET"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -156,7 +168,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -308,20 +320,20 @@
 
 #define	CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_FIRST_BANK	0
 #define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_FIRST_SECTOR  0
 #define CFG_JFFS2_LAST_SECTOR   62
 #define CFG_JFFS2_SORT_FRAGMENTS
 #define CFG_JFFS_CUSTOM_PART
-#endif /* CFG_CMD_JFFS2 */
+#endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		100000	/* I2C speed			*/
 #define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
-#endif /* CFG_CMD_I2C */
+#endif
 
 #define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -358,7 +370,7 @@
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif