summaryrefslogtreecommitdiff
path: root/include/configs/eb_cpu5282.h
diff options
context:
space:
mode:
authorJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>2012-10-30 00:46:05 +0000
committerAnatolij Gustschin <agust@denx.de>2012-11-14 12:16:50 +0100
commitd858c335bf4f7e9eb0b1dd521a4bd6487a27cd54 (patch)
treea0f4705b6f78b2765570c6e2db46f0985d4a857f /include/configs/eb_cpu5282.h
parentf5a7004cf772ad93dbfb1224cc02d882282c914e (diff)
downloadu-boot-imx-d858c335bf4f7e9eb0b1dd521a4bd6487a27cd54.zip
u-boot-imx-d858c335bf4f7e9eb0b1dd521a4bd6487a27cd54.tar.gz
u-boot-imx-d858c335bf4f7e9eb0b1dd521a4bd6487a27cd54.tar.bz2
M68K: eb_cpu5282: general update and enhanced board support
- update clock settings for higher perfomance - change standard baud rate to 115200 - fix flash base address - remove unused defines - add I2C support - switch form board dependent flash to cfi - remove board dependent flash code - use sdram bank 0 instead of bank 1 on boot - enable on board frame buffer instead external - remove fake mac address form config - add watchdog support - add status led support Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> [agust: fixed small style issues and build warning] Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'include/configs/eb_cpu5282.h')
-rw-r--r--include/configs/eb_cpu5282.h102
1 files changed, 66 insertions, 36 deletions
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 9ecc10b..5a0d321 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -38,7 +38,7 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 115200
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
@@ -52,20 +52,24 @@
#define CONFIG_RESET_TO_RETRY
#define CONFIG_SPLASH_SCREEN
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_ACTIVE 0
+#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_STATE STATUS_LED_OFF
+
/*----------------------------------------------------------------------*
* Configuration for environment *
* Environment is in the second sector of the first 256k of flash *
*----------------------------------------------------------------------*/
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */
-#define CONFIG_ENV_SECT_SIZE 0x4000
-#define CONFIG_ENV_IS_IN_FLASH 1
-#else
-#define CONFIG_ENV_ADDR 0xFFE04000
-#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_ADDR 0xFF040000
+#define CONFIG_ENV_SECT_SIZE 0x00020000
#define CONFIG_ENV_IS_IN_FLASH 1
-#endif
/*
* BOOTP options
@@ -78,26 +82,24 @@
/*
* Command line configuration.
*/
+#define CONFIG_CMDLINE_EDITING
#include <config_cmd_default.h>
#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_LED
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_MCFTMR
-
#define CONFIG_BOOTDELAY 5
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "\nEB+CPU5282> "
#define CONFIG_SYS_LONGHELP 1
-#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
@@ -112,12 +114,12 @@
/*----------------------------------------------------------------------*
* Clock and PLL Configuration *
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 10000000
-#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
-/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
+/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
-#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*----------------------------------------------------------------------*
@@ -135,7 +137,6 @@
#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
#define MCFFEC_TOUT_LOOP 50000
-#define CONFIG_ETHADDR 00:CF:52:82:EB:01
#define CONFIG_OVERWRITE_ETHADDR_ONCE
/*-------------------------------------------------------------------------
@@ -151,7 +152,7 @@
*-----------------------------------------------------------------------*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
@@ -161,12 +162,11 @@
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CONFIG_SYS_SDRAM_BASE1 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1
+#define CONFIG_SYS_SDRAM_BASE0 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
+#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
@@ -190,16 +190,24 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
+#define CONFIG_FLASH_SHOW_PROGRESS 45
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
-#define CONFIG_SYS_MAX_FLASH_SECT 35
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_SIZE 16*1024*1024
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
@@ -221,12 +229,16 @@
* Memory bank definitions
*/
-#define CONFIG_SYS_CS0_BASE 0xFFE00000
+#define CONFIG_SYS_CS0_BASE 0xFF000000
#define CONFIG_SYS_CS0_CTRL 0x00001980
-#define CONFIG_SYS_CS0_MASK 0x001F0001
+#define CONFIG_SYS_CS0_MASK 0x00FF0001
-#define CONFIG_SYS_CS3_BASE 0xE0000000
-#define CONFIG_SYS_CS0_CTRL 0x00001980
+#define CONFIG_SYS_CS2_BASE 0xE0000000
+#define CONFIG_SYS_CS2_CTRL 0x00001980
+#define CONFIG_SYS_CS2_MASK 0x000F0001
+
+#define CONFIG_SYS_CS3_BASE 0xE0100000
+#define CONFIG_SYS_CS3_CTRL 0x00001980
#define CONFIG_SYS_CS3_MASK 0x000F0001
/*-----------------------------------------------------------------------
@@ -248,24 +260,42 @@
#define CONFIG_SYS_PCDDR 0x0000000
#define CONFIG_SYS_PCDAT 0x0000000
+#define CONFIG_SYS_PASPAR 0x0F0F
#define CONFIG_SYS_PEHLPAR 0xC0
#define CONFIG_SYS_PUAPAR 0x0F
#define CONFIG_SYS_DDRUA 0x05
#define CONFIG_SYS_PJPAR 0xFF
/*-----------------------------------------------------------------------
+ * I2C
+ */
+
+#define CONFIG_HARD_I2C
+#define CONFIG_FSL_I2C
+
+#define CONFIG_SYS_I2C_OFFSET 0x00000300
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_I2C_RTC_ADDR 0x68
+#endif
+
+/*-----------------------------------------------------------------------
* VIDEO configuration
*/
#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_VCXK 1
+#define CONFIG_VIDEO_VCXK 1
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
-#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE
-#define CONFIG_SYS_VCXK_AUTODETECT 1
+#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR