Merge git://git.denx.de/u-boot into x1

Conflicts:

	drivers/usb/usb_ohci.c

1 files changed, 143 insertions, 143 deletions

diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index ecf4c5e..fc3174c 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -84,53 +84,53 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1	/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		8	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_LONGHELP		1	/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		8	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_MISC_INIT_R	1
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000	/* 1 GBytes - initdram() will	   */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000	/* 1 GBytes - initdram() will	   */
 					     /* return real value.		*/
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	    */
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	    */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_DATA_SIZE	128
+#define CONFIG_SYS_INIT_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_INIT_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_INIT_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
 
-#define CFG_GBL_DATA_SIZE	 256	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	 256	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 #if defined (CONFIG_MPC8240)
-#define CFG_FLASH_BASE	    0xFFE00000
-#define CFG_FLASH_SIZE	    (2 * 1024 * 1024)	/* onboard 2MByte flash	    */
+#define CONFIG_SYS_FLASH_BASE	    0xFFE00000
+#define CONFIG_SYS_FLASH_SIZE	    (2 * 1024 * 1024)	/* onboard 2MByte flash	    */
 #elif defined (CONFIG_MPC8245)
-#define CFG_FLASH_BASE	    0xFFC00000
-#define CFG_FLASH_SIZE	    (4 * 1024 * 1024)	/* onboard 4MByte flash	    */
+#define CONFIG_SYS_FLASH_BASE	    0xFFC00000
+#define CONFIG_SYS_FLASH_SIZE	    (4 * 1024 * 1024)	/* onboard 4MByte flash	    */
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
@@ -141,27 +141,27 @@
 #define CONFIG_ENV_ADDR		0xFFFC0000
 #define CONFIG_ENV_OFFSET		0	/* starting right at the beginning  */
 
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
-#define CFG_ALT_MEMTEST		1	/* use real memory test	    */
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on	    */
-#define CFG_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	    */
+#define CONFIG_SYS_ALT_MEMTEST		1	/* use real memory test	    */
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	    */
+#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	    */
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
-/* #define CFG_ISA_MEM		   0xFD000000 */
-#define CFG_ISA_IO		0xFE000000
+/* #define CONFIG_SYS_ISA_MEM		   0xFD000000 */
+#define CONFIG_SYS_ISA_IO		0xFE000000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks	    */
-#define CFG_MAX_FLASH_SECT	64	/* Max number of sectors per flash  */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per flash  */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define FLASH_BASE1_PRELIM	0
 
 
@@ -169,13 +169,13 @@
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection		*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank		*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 
 
 /*-----------------------------------------------------------------------
@@ -200,23 +200,23 @@
 /*-----------------------------------------------------------------------
  * NS16550 Configuration
  */
-#define CFG_NS16550		1
-#define CFG_NS16550_SERIAL	1
+#define CONFIG_SYS_NS16550		1
+#define CONFIG_SYS_NS16550_SERIAL	1
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		38400
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
 #if (CONFIG_CONS_INDEX == 1)
-#define CFG_NS16550_CLK		1843200 /* COM1 only !	*/
+#define CONFIG_SYS_NS16550_CLK		1843200 /* COM1 only !	*/
 #else
-#define CFG_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
+#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
 #endif
 
-#define CFG_NS16550_COM1	(CFG_ISA_IO + 0x3F8)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM3	(CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + 0x3F8)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*-----------------------------------------------------------------------
  * select i2c support configuration
@@ -227,15 +227,15 @@
  */
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2	/* for MPC8240 only		*/
@@ -245,76 +245,76 @@
 #if defined (CONFIG_MPC8245)
 /* Bit-field values for PMCR2.							*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_DLL_EXTEND		0x80	/* use DLL extended range - 133MHz only */
-#define CFG_PCI_HOLD_DEL	0x20	/* delay and hold timing - 133MHz only	*/
+#define CONFIG_SYS_DLL_EXTEND		0x80	/* use DLL extended range - 133MHz only */
+#define CONFIG_SYS_PCI_HOLD_DEL	0x20	/* delay and hold timing - 133MHz only	*/
 #endif
 
 /* Bit-field values for MIOCR1.							*/
 #if !defined (CONFIG_133MHZ_DRAM)
-#define CFG_DLL_MAX_DELAY	0x04	/*  longer DLL delay line - 66MHz only	*/
+#define CONFIG_SYS_DLL_MAX_DELAY	0x04	/*  longer DLL delay line - 66MHz only	*/
 #endif
 /* Bit-field values for MIOCR2.							*/
-#define CFG_SDRAM_DSCD		0x20	/* SDRAM data in sample clock delay	*/
+#define CONFIG_SYS_SDRAM_DSCD		0x20	/* SDRAM data in sample clock delay	*/
 					/*	- note bottom 3 bits MUST be 0	*/
 #endif
 
 /* Bit-field values for MCCR1.							*/
-#define CFG_ROMNAL		7	/*rom/flash next access time		*/
-#define CFG_ROMFAL	       11	/*rom/flash access time			*/
+#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL	       11	/*rom/flash access time			*/
 
 /* Bit-field values for MCCR2.							*/
-#define CFG_TSWAIT		0x5	/* Transaction Start Wait States timer	*/
+#define CONFIG_SYS_TSWAIT		0x5	/* Transaction Start Wait States timer	*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_REFINT		1300	/* no of clock cycles between CBR	*/
+#define CONFIG_SYS_REFINT		1300	/* no of clock cycles between CBR	*/
 #else  /* refresh cycles */
-#define CFG_REFINT		750
+#define CONFIG_SYS_REFINT		750
 #endif
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.		*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_BSTOPRE		1023
+#define CONFIG_SYS_BSTOPRE		1023
 #else
-#define CFG_BSTOPRE		250
+#define CONFIG_SYS_BSTOPRE		250
 #endif
 
 /* Bit-field values for MCCR3.							*/
 /* the following are for SDRAM only						*/
 
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_REFREC		9	/* Refresh to activate interval		*/
+#define CONFIG_SYS_REFREC		9	/* Refresh to activate interval		*/
 #else
-#define CFG_REFREC		5	/* Refresh to activate interval		*/
+#define CONFIG_SYS_REFREC		5	/* Refresh to activate interval		*/
 #endif
 #if defined (CONFIG_MPC8240)
-#define CFG_RDLAT		2	/* data latency from read command	*/
+#define CONFIG_SYS_RDLAT		2	/* data latency from read command	*/
 #endif
 
 /* Bit-field values for MCCR4.	*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		7	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		5	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		7	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		5	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
 #else
 #if 0
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		3	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		3	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
 #endif
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
 #endif
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
-#define CFG_REGDIMM		0
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_REGDIMM		0
 #if defined (CONFIG_MPC8240)
-#define CFG_REGISTERD_TYPE_BUFFER   0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   0
 #elif defined (CONFIG_MPC8245)
-#define CFG_REGISTERD_TYPE_BUFFER   1
-#define CFG_EXTROM		    0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_EXTROM		    0
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
@@ -327,51 +327,51 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 
 /*-----------------------------------------------------------------------
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
 #if defined (CONFIG_MPC8240)
-#define CFG_ODCR		0xDF	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xDF	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
 #elif defined (CONFIG_MPC8245)
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_ODCR		0xFE	/* configures line driver impedances - 133MHz	*/
+#define CONFIG_SYS_ODCR		0xFE	/* configures line driver impedances - 133MHz	*/
 #else
-#define CFG_ODCR		0xDE	/* configures line driver impedances - 66MHz	*/
+#define CONFIG_SYS_ODCR		0xDE	/* configures line driver impedances - 66MHz	*/
 #endif
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
@@ -379,37 +379,37 @@
  * Block Address Translation (BAT) register settings.
  */
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
@@ -432,15 +432,15 @@
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
  */
-#define CFG_IDE_MAXBUS	    1	/* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE   (CFG_IDE_MAXBUS*1)	/* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS	    1	/* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE   (CONFIG_SYS_IDE_MAXBUS*1)	/* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR   CFG_ISA_IO	/* base address */
-#define CFG_ATA_IDE0_OFFSET 0x01F0	/* ide0 offste */
-#define CFG_ATA_IDE1_OFFSET 0x0170	/* ide1 offset */
-#define CFG_ATA_DATA_OFFSET 0	/* data reg offset  */
-#define CFG_ATA_REG_OFFSET  0	/* reg offset */
-#define CFG_ATA_ALT_OFFSET  0x200	/* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR   CONFIG_SYS_ISA_IO	/* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0	/* ide0 offste */
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170	/* ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0	/* data reg offset  */
+#define CONFIG_SYS_ATA_REG_OFFSET  0	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET  0x200	/* alternate register offset */
 
 #define CONFIG_ATAPI
 
@@ -459,6 +459,6 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #endif /* __CONFIG_H */