ppc4xx: Add GDsys CompactCenter board support.

Board support for the Guntermann & Drunck CompactCenter and
DevCon-Center.
Based on the AMCC Canyonlands board support by Stefan Roese.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 437 insertions, 0 deletions

diff --git a/include/configs/compactcenter.h b/include/configs/compactcenter.h
new file mode 100644
index 0000000..f8a1bbb
--- /dev/null
+++ b/include/configs/compactcenter.h
@@ -0,0 +1,437 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * Based on include/configs/canyonlands.h
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * compactcenter.h - configuration for CompactCenter (460EX)
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+/*
+ * This config file is used for CompactCenter and DevCon-Center
+ */
+#define CONFIG_460EX		1	/* Specific PPC460EX		*/
+#ifdef CONFIG_DEVCONCENTER
+#define CONFIG_HOSTNAME		devconcenter
+#define CONFIG_IDENT_STRING	" devconcenter 0.02"
+#else
+#define CONFIG_HOSTNAME		compactcenter
+#define CONFIG_IDENT_STRING	" compactcenter 0.02"
+#endif
+#define CONFIG_440		1
+#define CONFIG_4xx		1	/* ... PPC4xx family */
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#include "amcc-common.h"
+
+#define CONFIG_SYS_CLK_FREQ	66666667	/* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R		1	/* Call misc_init_r */
+#define CONFIG_BOARD_TYPES		1	/* support board types */
+#define CONFIG_FIT
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory */
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs */
+#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
+
+/* EBC stuff */
+#ifdef CONFIG_DEVCONCENTER               /* Devcon-Center has 128 MB of flash */
+#define CONFIG_SYS_FLASH_BASE		0xF8000000	/* later mapped here */
+#define CONFIG_SYS_FLASH_SIZE		(128 << 20)
+#else
+#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* later mapped here */
+#define CONFIG_SYS_FLASH_SIZE		(64 << 20)
+#endif
+
+#define CONFIG_SYS_NVRAM_BASE		0xE0000000
+#define CONFIG_SYS_UART_BASE		0xE0100000
+#define CONFIG_SYS_IO_BASE		0xE0200000
+
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space */
+#define CONFIG_SYS_FLASH_BASE_PHYS_H	0x4
+#ifdef CONFIG_DEVCONCENTER               /* Devcon-Center has 128 MB of flash */
+#define CONFIG_SYS_FLASH_BASE_PHYS_L	0xC8000000
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS_L	0xCC000000
+#endif
+#define CONFIG_SYS_FLASH_BASE_PHYS \
+	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
+	| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
+
+#define CONFIG_SYS_OCM_BASE		0xE3000000	/* OCM: 64k */
+#define CONFIG_SYS_SRAM_BASE		0xE8000000	/* SRAM: 256k */
+#define CONFIG_SYS_LOCAL_CONF_REGS	0xEF000000
+
+#define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000	/* internal periph. */
+
+#define CONFIG_SYS_AHB_BASE		0xE2000000	/* int. AHB periph. */
+
+/*
+ * Initial RAM & stack pointer (placed in OCM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Serial Port
+ */
+#undef CONFIG_UART1_CONSOLE	/* define this if you want console on UART1 */
+
+/*
+ * Environment
+ */
+/*
+ * Define here the location of the environment variables (FLASH).
+ */
+#define	CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define CONFIG_SYS_NOR_CS		0	/* NOR chip connected to CSx */
+
+/*
+ * FLASH related
+ */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
+#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD reset cmd */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#ifdef CONFIG_DEVCONCENTER
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max num of sectors per chip*/
+#else
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sectors per chip*/
+#endif
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase/ms */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write/ms */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* buff'd writes (20x faster) */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* size of one complete sector*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
+
+/*
+ * DDR SDRAM
+ */
+
+#define CONFIG_AUTOCALIB	"silent\0"	/* default is non-verbose    */
+
+#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration   */
+#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
+#undef CONFIG_PPC4xx_DDR_METHOD_A
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+/* Memory Queue */
+#define CONFIG_SYS_SDRAM_R0BAS		0x0000f800
+#define CONFIG_SYS_SDRAM_R1BAS		0x00000000
+#define CONFIG_SYS_SDRAM_R2BAS		0x00000000
+#define CONFIG_SYS_SDRAM_R3BAS		0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDULL	0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDUHB	0x00000008
+#define CONFIG_SYS_SDRAM_CONF1LL	0x80001C80
+#define CONFIG_SYS_SDRAM_CONF1HB	0x80001C80
+#define CONFIG_SYS_SDRAM_CONFPATHB	0x10a68000
+
+/* SDRAM Controller */
+#define CONFIG_SYS_SDRAM0_MB0CF		0x00000201
+#define CONFIG_SYS_SDRAM0_MB1CF		0x00000000
+#define CONFIG_SYS_SDRAM0_MB2CF		0x00000000
+#define CONFIG_SYS_SDRAM0_MB3CF		0x00000000
+#define CONFIG_SYS_SDRAM0_MCOPT1	0x05122000
+#define CONFIG_SYS_SDRAM0_MCOPT2	0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT1		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT2		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT3		0x00000000
+#define CONFIG_SYS_SDRAM0_CODT		0x00000020
+#define CONFIG_SYS_SDRAM0_RTR		0x06180000
+#define CONFIG_SYS_SDRAM0_INITPLR0	0xA8380000
+#define CONFIG_SYS_SDRAM0_INITPLR1	0x81900400
+#define CONFIG_SYS_SDRAM0_INITPLR2	0x81020000
+#define CONFIG_SYS_SDRAM0_INITPLR3	0x81030000
+#define CONFIG_SYS_SDRAM0_INITPLR4	0x81010000
+#define CONFIG_SYS_SDRAM0_INITPLR5	0xE4000542
+#define CONFIG_SYS_SDRAM0_INITPLR6	0x81900400
+#define CONFIG_SYS_SDRAM0_INITPLR7	0x8A880000
+#define CONFIG_SYS_SDRAM0_INITPLR8	0x8A880000
+#define CONFIG_SYS_SDRAM0_INITPLR9	0x8A880000
+#define CONFIG_SYS_SDRAM0_INITPLR10	0x8A880000
+#define CONFIG_SYS_SDRAM0_INITPLR11	0x81000442
+#define CONFIG_SYS_SDRAM0_INITPLR12	0x81010380
+#define CONFIG_SYS_SDRAM0_INITPLR13	0x81010000
+#define CONFIG_SYS_SDRAM0_INITPLR14	0x00000000
+#define CONFIG_SYS_SDRAM0_INITPLR15	0x00000000
+#define CONFIG_SYS_SDRAM0_RQDC		0x80000038
+#define CONFIG_SYS_SDRAM0_RFDC		0x003F0000
+#define CONFIG_SYS_SDRAM0_RDCC		0x80000000
+#define CONFIG_SYS_SDRAM0_DLCR		0x00000000
+#define CONFIG_SYS_SDRAM0_CLKTR		0x40000000
+#define CONFIG_SYS_SDRAM0_WRDTR		0x84000800
+#define CONFIG_SYS_SDRAM0_SDTR1		0x80201000
+#define CONFIG_SYS_SDRAM0_SDTR2		0x32204232
+#define CONFIG_SYS_SDRAM0_SDTR3		0x090B0D15
+#define CONFIG_SYS_SDRAM0_MMODE		0x00000442
+#define CONFIG_SYS_SDRAM0_MEMODE	0x00000000
+
+#define CONFIG_SYS_MBYTES_SDRAM	256	/* 256MB */
+
+/*
+ * I2C
+ */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
+
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x54
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		16
+
+/* I2C SYSMON */
+#define CONFIG_DTT_LM63         1       /* National LM63        */
+#define CONFIG_DTT_SENSORS      { 0 }   /* Sensor addresses     */
+#define CONFIG_DTT_PWM_LOOKUPTABLE      \
+	{ { 40, 10 }, { 50, 20 }, { 60, 40 } }
+#define CONFIG_DTT_TACH_LIMIT   0xa10
+
+/* RTC configuration */
+#define CONFIG_RTC_DS1337	1
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+
+/*
+ * Ethernet
+ */
+#define CONFIG_IBM_EMAC4_V4	1
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_PHY_ADDR		2	/* PHY address, See schematics	*/
+#define CONFIG_PHY1_ADDR	3
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG	1
+
+/*
+ * USB-OHCI
+ */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#undef CONFIG_SYS_OHCI_BE_CONTROLLER	/* 460EX has little endian descriptors*/
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	/* 460EX has little endian register */
+#define CONFIG_SYS_OHCI_USE_NPS		/* force NoPowerSwitching mode */
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	(CONFIG_SYS_AHB_BASE | 0xd0000)
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	"kernel_addr=fc000000\0"					\
+	"fdt_addr=fc1e0000\0"						\
+	"ramdisk_addr=fc200000\0"					\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	""
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * PCI stuff
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+#define CONFIG_PCI_DISABLE_PCIE
+
+/* Board-specific PCI */
+#define CONFIG_SYS_PCI_TARGET_INIT	/* let board init pci target */
+#undef	CONFIG_SYS_PCI_MASTER_INIT
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/*
+ * CompactCenter has 64MBytes of NOR FLASH (Spansion 29GL512), but the
+ * boot EBC mapping only supports a maximum of 16MBytes
+ * (4.ff00.0000 - 4.ffff.ffff).
+ * To solve this problem, the FLASH has to get remapped to another
+ * EBC address which accepts bigger regions:
+ *
+ * 0xfc00.0000 -> 4.cc00.0000
+ */
+
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CONFIG_SYS_EBC_PB0AP		0x10055e00
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
+
+/* Memory Bank 1 (NVRAM) initialization	*/
+#define CONFIG_SYS_EBC_PB1AP		0x02815480
+/* BAS=NVRAM,BS=1MB,BU=R/W,BW=8bit*/
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_NVRAM_BASE | 0x18000)
+
+/* Memory Bank 2 (UART) initialization	*/
+#define CONFIG_SYS_EBC_PB2AP		0x02815480
+/* BAS=UART,BS=1MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_UART_BASE | 0x1A000)
+
+/* Memory Bank 3 (IO) initialization */
+#define CONFIG_SYS_EBC_PB3AP		0x02815480
+/* BAS=IO,BS=1MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_IO_BASE | 0x1A000)
+
+/*
+ * PPC4xx GPIO Configuration
+ */
+/* 460EX: Use USB configuration */
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	GMC1TxD(0)	USB2HostD(0)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	GMC1TxD(1)	USB2HostD(1)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2	GMC1TxD(2)	USB2HostD(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3	GMC1TxD(3)	USB2HostD(3)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4	GMC1TxD(4)	USB2HostD(4)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5	GMC1TxD(5)	USB2HostD(5)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6	GMC1TxD(6)	USB2HostD(6)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	GMC1TxD(7)	USB2HostD(7)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	GMC1RxD(0)	USB2OTGD(0)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	GMC1RxD(1)	USB2OTGD(1)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)	USB2OTGD(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)	USB2OTGD(3)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)	USB2OTGD(4)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)	USB2OTGD(5)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)	USB2OTGD(6)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)	USB2OTGD(7)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL,  GPIO_OUT_0}, /* GPIO16 GMC1TxER	USB2HostStop	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD		USB2HostNext	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER	USB2HostDir	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO19 GMC1TxEN	USB2OTGStop	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS	USB2OTGNext	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV	USB2OTGDir	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0	DMAReq2		IRQ(7)*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1	DMAAck2		IRQ(8)*/ \
+},											\
+{											\
+/* GPIO Core 1 */									\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2	EOT2/TC2	IRQ(9)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3	DMAReq3		IRQ(4)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N	EOT3/TC3	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)				*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)				*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)				*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)		DMAReq1		IRQ(10)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)		DMAAck1		IRQ(11)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)		EOT/TC1		IRQ(12)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)	DMAReq0		IRQ(13)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)	DMAAck0		IRQ(14)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)	EOT/TC0		IRQ(15)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  USB_SERVICE_SUSPEND_N		*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO51  SPI_CSS_N			*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO52  FPGA_PROGRAM_UC_N		*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  FPGA_INIT_UC_N		*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO54  WD_STROBE			*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55  LED_2_OUT			*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO56  LED_1_OUT			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO61  STARTUP_FINISHED_N		*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO62  STARTUP_FINISHED		*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  SERVICE_PORT_ACTIVE		*/	\
+}											\
+}
+
+#endif	/* __CONFIG_H */