Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 76 insertions, 76 deletions

diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index 84d50c7..c580230 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -136,25 +136,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Low Level Configuration Settings
@@ -164,19 +164,19 @@
 
 /*-----------------------------------------------------------------------
  * Low Level Cogent settings
- * if CFG_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not.
+ * if CONFIG_SYS_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not.
  * also, make sure CONFIG_CONS_INDEX is still defined - the index will be
  * 1 for serialA, 2 for serialB, 3 for ser2A, 4 for ser2B
  * (second 2 for CMA120 only)
  */
-#define CFG_CMA_MB_BASE		0x00000000	/* base of m/b address space */
+#define CONFIG_SYS_CMA_MB_BASE		0x00000000	/* base of m/b address space */
 
 #include <configs/cogent_common.h>
 
 #ifdef CONFIG_CONS_NONE
-#define CFG_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
+#define CONFIG_SYS_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
 #endif
-#define CFG_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
+#define CONFIG_SYS_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
 #define CONFIG_SHOW_ACTIVITY
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
@@ -197,81 +197,81 @@
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
-#define CFG_HRCW_MASTER	(HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\
 			 HRCW_ISB100|HRCW_MMR11|HRCW_MODCK_H0101)
 /* no slaves so just duplicate the master hrcw */
-#define CFG_HRCW_SLAVE1	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE2	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE3	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE4	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE5	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE6	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE7	CFG_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE1	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE2	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE3	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE4	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE5	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE6	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE7	CONFIG_SYS_HRCW_MASTER
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		CMA_MB_RAM_BASE
+#define	CONFIG_SYS_SDRAM_BASE		CMA_MB_RAM_BASE
 #ifdef CONFIG_CMA302
-#define CFG_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
+#define CONFIG_SYS_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
 #else
-#define CFG_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
+#define CONFIG_SYS_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
 #endif
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		CFG_FLASH_BASE /* Addr of Environment Sector */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE /* Addr of Environment Sector */
 #ifdef CONFIG_CMA302
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
+#define	CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
 #else
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -284,29 +284,29 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR		RMR_CSRE
+#define CONFIG_SYS_RMR		RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		BCR_EBM
+#define CONFIG_SYS_BCR		BCR_EBM
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11)
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				 4-35
@@ -315,10 +315,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -328,7 +328,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -336,20 +336,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR	(SCCR_DFBRG01)
+#define CONFIG_SYS_SCCR	(SCCR_DFBRG01)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 #if defined(CONFIG_CMA282)
 
@@ -367,26 +367,26 @@
  * (the *_SIZE vars must be a power of 2)
  */
 
-#define CFG_CMA_CS0_BASE	TEXT_BASE	/* EPROM */
-#define CFG_CMA_CS0_SIZE	(1 << 20)
+#define CONFIG_SYS_CMA_CS0_BASE	TEXT_BASE	/* EPROM */
+#define CONFIG_SYS_CMA_CS0_SIZE	(1 << 20)
 #if 0
-#define CFG_CMA_CS2_BASE	0x10000000	/* Local Bus SDRAM */
-#define CFG_CMA_CS2_SIZE	(16 << 20)
+#define CONFIG_SYS_CMA_CS2_BASE	0x10000000	/* Local Bus SDRAM */
+#define CONFIG_SYS_CMA_CS2_SIZE	(16 << 20)
 #endif
 
 /*
  * CS0 maps the EPROM on the cpu module
- * Set it for 10 wait states, address CFG_MONITOR_BASE and size 1M
+ * Set it for 10 wait states, address CONFIG_SYS_MONITOR_BASE and size 1M
  *
  * Note: We must have already transferred control to the final location
  * of the EPROM before these are used, because when BR0/OR0 are set, the
  * mirror of the eprom at any other addresses will disappear.
  */
 
-/* base address = CFG_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */
-#define CFG_BR0_PRELIM	((CFG_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V)
-/* mask size CFG_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_CMA_CS0_SIZE)|\
+/* base address = CONFIG_SYS_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V)
+/* mask size CONFIG_SYS_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_CMA_CS0_SIZE)|\
 				ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
 
 /*
@@ -399,10 +399,10 @@
  */
 
 #if 0
-/* base address = CFG_CMA_CS2_BASE, 32-bit, no parity, ??? */
-#define CFG_BR0_PRELIM	((CFG_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V)
-/* mask size CFG_CMA_CS2_SIZE, CS time normal, ??? */
-#define CFG_OR2_PRELIM	((~(CFG_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/)
+/* base address = CONFIG_SYS_CMA_CS2_BASE, 32-bit, no parity, ??? */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V)
+/* mask size CONFIG_SYS_CMA_CS2_SIZE, CS time normal, ??? */
+#define CONFIG_SYS_OR2_PRELIM	((~(CONFIG_SYS_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/)
 #endif
 
 #endif