Initial revision

1 files changed, 400 insertions, 0 deletions

diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
new file mode 100644
index 0000000..22d154e
--- /dev/null
+++ b/include/configs/cogent_mpc8260.h
@@ -0,0 +1,400 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Config header file for Cogent platform using an MPC8xx CPU module
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
+#define CONFIG_COGENT		1	/* using Cogent Modular Architecture */
+
+/* Cogent Modular Architecture options */
+#define CONFIG_CMA282		1	/* ...on a CMA282 CPU module	*/
+#define CONFIG_CMA111		1	/* ...on a CMA111 motherboard	*/
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere (for example, on the cogent platform, there are serial
+ * ports on the motherboard which are used for the serial console - see
+ * cogent/cma101/serial.[ch]).
+ */
+#define	CONFIG_CONS_ON_SMC		/* define if console on SMC */
+#undef	CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on something else*/
+#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
+#undef	CONFIG_CONS_USE_EXTC		/* SMC/SCC use ext clock not brg_clk */
+#define	CONFIG_CONS_EXTC_RATE	3686400	/* SMC/SCC ext clk rate in Hz */
+#define	CONFIG_CONS_EXTC_PINSEL	0	/* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC	*/
+#undef	CONFIG_ETHER_ON_FCC		/* define if ether on FCC	*/
+#define	CONFIG_ETHER_NONE		/* define if ether on something else */
+#define CONFIG_ETHER_INDEX	1	/* which channel for ether	*/
+
+/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
+#define CONFIG_8260_CLKIN	66666666	/* in Hz */
+
+#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
+#define CONFIG_BAUDRATE		230400
+#else
+#define CONFIG_BAUDRATE		9600
+#endif
+
+#define CONFIG_COMMANDS		((CONFIG_CMD_DFL|CFG_CMD_KGDB)&~CFG_CMD_NET)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#ifdef DEBUG
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+#define CONFIG_BOOTCOMMAND	"bootm 04080000 04200000" /* autoboot command*/
+
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
+#undef	CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
+#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
+#define	CONFIG_KGDB_USE_EXTC		/* SMC/SCC use ext clock not brg_clk */
+#define	CONFIG_KGDB_EXTC_RATE	3686400	/* serial ext clk rate in Hz */
+#define	CONFIG_KGDB_EXTC_PINSEL	0	/* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
+# if defined(CONFIG_KGDB_NONE) || defined(CONFIG_KGDB_USE_EXTC)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port at */
+# else
+#define CONFIG_KGDB_BAUDRATE	9600	/* speed to run kgdb serial port at */
+# endif
+#endif
+
+#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Low Level Cogent settings
+ * if CFG_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not.
+ * also, make sure CONFIG_CONS_INDEX is still defined - the index will be
+ * 1 for serialA, 2 for serialB, 3 for ser2A, 4 for ser2B
+ * (second 2 for CMA120 only)
+ */
+#define CFG_CMA_MB_BASE		0x00000000	/* base of m/b address space */
+
+#include <configs/cogent_common.h>
+
+#ifdef CONFIG_CONS_NONE
+#define CFG_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
+#endif
+#define CFG_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
+
+#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
+/*
+ * flash exists on the motherboard
+ * set these four according to TOP dipsw:
+ * TOP on  => ..._FLLOW_...	(boot EPROM space is high so FLASH is low )
+ * TOP off => ..._FLHIGH_...	(boot EPROM space is low  so FLASH is high)
+ */
+#define CMA_MB_FLASH_EXEC_BASE	CMA_MB_FLLOW_EXEC_BASE
+#define CMA_MB_FLASH_EXEC_SIZE	CMA_MB_FLLOW_EXEC_SIZE
+#define CMA_MB_FLASH_RDWR_BASE	CMA_MB_FLLOW_RDWR_BASE
+#define CMA_MB_FLASH_RDWR_SIZE	CMA_MB_FLLOW_RDWR_SIZE
+#endif
+#define CMA_MB_FLASH_BASE	CMA_MB_FLASH_EXEC_BASE
+#define CMA_MB_FLASH_SIZE	CMA_MB_FLASH_EXEC_SIZE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ *
+ * if you change bits in the HRCW, you must also change the CFG_*
+ * defines for the various registers affected by the HRCW e.g. changing
+ * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ */
+#define CFG_HRCW_MASTER	(HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\
+			 HRCW_ISB100|HRCW_MMR11|HRCW_MODCK_H0101)
+/* no slaves so just duplicate the master hrcw */
+#define CFG_HRCW_SLAVE1	CFG_HRCW_MASTER
+#define CFG_HRCW_SLAVE2	CFG_HRCW_MASTER
+#define CFG_HRCW_SLAVE3	CFG_HRCW_MASTER
+#define CFG_HRCW_SLAVE4	CFG_HRCW_MASTER
+#define CFG_HRCW_SLAVE5	CFG_HRCW_MASTER
+#define CFG_HRCW_SLAVE6	CFG_HRCW_MASTER
+#define CFG_HRCW_SLAVE7	CFG_HRCW_MASTER
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xF0000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		CMA_MB_RAM_BASE
+#ifdef CONFIG_CMA302
+#define CFG_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
+#else
+#define CFG_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
+#endif
+#define	CFG_MONITOR_BASE	TEXT_BASE
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		CFG_FLASH_BASE /* Addr of Environment Sector */
+#ifdef CONFIG_CMA302
+#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
+#else
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers			 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+				HID0_IFEM|HID0_ABE)
+#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CFG_HID2	0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register					 5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CFG_RMR		RMR_CSRE
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration					 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR		BCR_EBM
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				 4-31
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR	(SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11)
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				 4-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control			 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control					 9-8
+ *-----------------------------------------------------------------------
+ * Ensure DFBRG is Divide by 16
+ */
+#define CFG_SCCR	(SCCR_DFBRG01)
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration				13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR	0
+
+#if defined(CONFIG_CMA282)
+
+/*
+ * Init Memory Controller:
+ *
+ * According to the Cogent manual, only CS0 and CS2 are used - CS0 for EPROM
+ * and CS2 for (optional) local bus RAM on the CPU module.
+ *
+ * Note the motherboard address space (256 Mbyte in size) is connected
+ * to the 60x Bus and is located starting at address 0. The Hard Reset
+ * Configuration Word should put the 60x Bus into External Bus Mode, since
+ * we dont set up any memory controller maps for it (see BCR[EBM], 4-26).
+ *
+ * (the *_SIZE vars must be a power of 2)
+ */
+
+#define CFG_CMA_CS0_BASE	TEXT_BASE	/* EPROM */
+#define CFG_CMA_CS0_SIZE	(1 << 20)
+#if 0
+#define CFG_CMA_CS2_BASE	0x10000000	/* Local Bus SDRAM */
+#define CFG_CMA_CS2_SIZE	(16 << 20)
+#endif
+
+/*
+ * CS0 maps the EPROM on the cpu module
+ * Set it for 10 wait states, address CFG_MONITOR_BASE and size 1M
+ *
+ * Note: We must have already transferred control to the final location
+ * of the EPROM before these are used, because when BR0/OR0 are set, the
+ * mirror of the eprom at any other addresses will disappear.
+ */
+
+/* base address = CFG_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */
+#define CFG_BR0_PRELIM	((CFG_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V)
+/* mask size CFG_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */
+#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_CMA_CS0_SIZE)|\
+				ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
+
+/*
+ * CS2 enables the Local Bus SDRAM on the CPU Module
+ *
+ * Will leave this unset for the moment, because a) my CPU module has no
+ * SDRAM installed (it is optional); and b) it will require programming
+ * one of the UPMs in SDRAM mode - not a trivial job, and hard to get right
+ * if you can't test it.
+ */
+
+#if 0
+/* base address = CFG_CMA_CS2_BASE, 32-bit, no parity, ??? */
+#define CFG_BR0_PRELIM	((CFG_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V)
+/* mask size CFG_CMA_CS2_SIZE, CS time normal, ??? */
+#define CFG_OR2_PRELIM	((~(CFG_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/)
+#endif
+
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+
+#endif	/* __CONFIG_H */