cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.

Add the ability for modules from the Schindler cm5200 family to use a
single U-Boot image:
- rename cm1_qp1 to cm5200
- add run-time module detection
- parametrize SDRAM configuration according to the module we are running on

Few minor, board-specific fixes included in this patch:
- better MAC address handling
- updated default environment ('update' command uses +{filesize} now)
- improved error messages in the auto-update code
- allow booting U-Boot from RAM (CFG_RAMBOOT)

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

1 files changed, 362 insertions, 0 deletions

diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
new file mode 100644
index 0000000..7662856
--- /dev/null
+++ b/include/configs/cm5200.h
@@ -0,0 +1,362 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
+#define CONFIG_CM5200		1	/* ... on CM5200 platform */
+
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_FLASH	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_SNTP	| \
+				CFG_CMD_BSP	| \
+				CFG_CMD_USB	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_JFFS2)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
+#define CONFIG_BAUDRATE		57600	/* ... at 57600 bps */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SILENT_CONSOLE	1	/* needed to silence i2c_init() */
+
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_ENV_OVERWRITE	1	/* allow overwriting of ethaddr */
+/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CONFIG_MISC_INIT_R	1
+#define CONFIG_MAC_OFFSET	0x35	/* MAC address offset in I2C EEPROM */
+
+
+/*
+ * POST support
+ */
+#define CONFIG_POST		(CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C)
+#define MPC5XXX_SRAM_POST_SIZE	(MPC5XXX_SRAM_SIZE - 4)
+/* List of I2C addresses to be verified by POST */
+#define I2C_ADDR_LIST		{ CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
+
+
+/* display image timestamps */
+#define CONFIG_TIMESTAMP	1
+
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \
+	"echo"
+#undef CONFIG_BOOTARGS
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"netmask=255.255.0.0\0"						\
+	"ipaddr=192.168.160.33\0"					\
+	"serverip=192.168.1.1\0"					\
+	"gatewayip=192.168.1.1\0"					\
+	"console=ttyPSC0\0"						\
+	"u-boot_addr=100000\0"						\
+	"kernel_addr=200000\0"						\
+	"kernel_addr_flash=fc0c0000\0"					\
+	"fdt_addr=400000\0"						\
+	"fdt_addr_flash=fc0a0000\0"					\
+	"ramdisk_addr=500000\0"						\
+	"rootpath=/opt/eldk-4.1/ppc_6xx\0"				\
+	"u-boot=/tftpboot/cm5200/u-boot.bin\0"				\
+	"bootfile_fdt=/tftpboot/cm5200/uImage\0"			\
+	"fdt_file=/tftpboot/cm5200/cm5200.dtb\0"			\
+	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
+	"update=prot off fc000000 +${filesize}; "			\
+		"era fc000000 +${filesize}; "				\
+		"cp.b ${u-boot_addr} fc000000 ${filesize}; "		\
+		"prot on fc000000 +${filesize}\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"flashargs=setenv bootargs root=/dev/mtdblock5 rw\0"		\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addinit=setenv bootargs ${bootargs} init=/linuxrc\0"		\
+	"addcons=setenv bootargs ${bootargs} "				\
+		"console=${console},${baudrate}\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+		"${netmask}:${hostname}:${netdev}:off panic=1\0"	\
+	"flash_flash=run flashargs addinit addip addcons;"		\
+		"bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0"	\
+	"net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; "		\
+		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip "	\
+		"addcons; bootm ${kernel_addr} - ${fdt_addr}\0"		\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_flash"
+
+
+/*
+ * Low level configuration
+ */
+
+
+/*
+ * Clock configuration
+ */
+#define CFG_MPC5XXX_CLKIN	33000000	/* SYS_XTAL_IN = 33MHz */
+#define CFG_IPBCLK_EQUALS_XLBCLK	1	/* IPB = 133MHz */
+
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+#define CFG_LOWBOOT		1
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#endif
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_BOARD_TYPES	1	/* we use board_type */
+
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(384 << 10)	/* 384 kB for Monitor */
+#define CFG_MALLOC_LEN		(256 << 10)	/* 256 kB for malloc() */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI		1
+#define CFG_FLASH_CFI_DRIVER	1
+#define CFG_FLASH_BASE		0xfc000000	
+/* we need these despite using CFI */
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks */
+#define CFG_MAX_FLASH_SECT	256	/* max num of sectors on one chip */
+#define CFG_FLASH_SIZE		0x02000000 /* 32 MiB */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT		1
+#undef CFG_LOWBOOT
+#endif
+
+
+/*
+ * Chip selects configuration
+ */
+/* Boot Chipselect */
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00087D31	/* for pci_clk = 33 MHz */
+/* use board_early_init_r to enable flash write in CS_BOOT */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/* Flash memory addressing */
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+/* No burst, dead cycle = 1 for CS0 (Flash) */
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x00000001
+
+
+/*
+ * SDRAM configuration
+ * settings for k4s561632E-xx75, assuming XLB = 132 MHz
+ */
+#define SDRAM_MODE	0x00CD0000	/* CASL 3, burst length 8 */
+#define SDRAM_CONTROL	0x514F0000
+#define SDRAM_CONFIG1	0xE2333900
+#define SDRAM_CONFIG2	0x8EE70000
+
+
+
+/*
+ * MTD configuration
+ */
+#define CONFIG_JFFS2_CMDLINE	1
+#define MTDIDS_DEFAULT		"nor0=cm5200-0"
+#define MTDPARTS_DEFAULT	"mtdparts=cm5200-0:"			\
+					"384k(uboot),128k(env),"	\
+					"128k(redund_env),128k(dtb),"	\
+					"2m(kernel),27904k(rootfs),"	\
+					"-(config)"
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #2 */
+#define CFG_I2C_SPEED		40000	/* 40 kHz */
+#define CFG_I2C_SLAVE		0x0
+#define CFG_I2C_IO		0x38	/* PCA9554AD I2C I/O port address */
+#define CFG_I2C_EEPROM		0x53	/* I2C EEPROM device address */
+
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
+
+
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_OHCI		1
+#define CONFIG_USB_STORAGE	1
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+/* Partitions (for USB) */
+#define CONFIG_MAC_PARTITION	1
+#define CONFIG_DOS_PARTITION	1
+#define CONFIG_ISO_PARTITION	1
+
+/*
+ * Invoke our last_stage_init function - needed by fwupdate
+ */
+#define CONFIG_LAST_STAGE_INIT	1
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+/* Configuration of redundant environment */
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+
+/*
+ * Pin multiplexing configuration
+ */
+
+/*
+ * CS1/GPIO_WKUP_6: GPIO (default)
+ * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1
+ * IRDA/PSC6: UART
+ * Ether: Ethernet 100Mbit with MD
+ * PCI_DIS: PCI controller disabled
+ * USB: USB
+ * PSC3: SPI with UART3
+ * PSC2: UART
+ * PSC1: UART
+ */
+#define CFG_GPS_PORT_CONFIG	0x10559C44
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		1	/* undef to save memory */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_ALT_MEMTEST		1
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x03f00000	/* 1 .. 63 MiB in SDRAM */
+
+#define CONFIG_LOOPW		1
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot */
+
+#define CFG_XLB_PIPELINING	1	/* enable transaction pipeling */
+
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
+/*
+ * Flat Device Tree support
+ */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define OF_CPU			"PowerPC,5200@0"
+#define OF_SOC			"soc5200@f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
+
+#endif /* __CONFIG_H */