blackfin: bf60x: add board and headers files to support bf609

Board and config header files for bf609-ezkit support.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>

1 files changed, 161 insertions, 0 deletions

diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
new file mode 100644
index 0000000..6dffab8
--- /dev/null
+++ b/include/configs/bf609-ezkit.h
@@ -0,0 +1,161 @@
+/*
+ * U-boot - Configuration file for BF609 EZ-Kit board
+ */
+
+#ifndef __CONFIG_BF609_EZKIT_H__
+#define __CONFIG_BF609_EZKIT_H__
+
+#include <asm/config-pre.h>
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf609-0.0
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
+
+
+/* For ez-board version 1.0, else undef this */
+#define CONFIG_BFIN_BOARD_VERSION_1_0
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV
+ *	SCLK0 = SCLK / SCLK0_DIV
+ *	SCLK1 = SCLK / SCLK1_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			(25000000)
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		(0)
+
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-127 (where 0 means 128)			*/
+#define CONFIG_VCO_MULT			(20)
+
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_CCLK_DIV			(1)
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_SCLK_DIV		(4)
+/* Values can range from 0-7 (where 0 means 8)				*/
+#define CONFIG_SCLK0_DIV		(1)
+#define CONFIG_SCLK1_DIV		(1)
+/* DCLK_DIV controls the DDR clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_DCLK_DIV			(2)
+/* OCLK_DIV controls the output clock divider				*/
+/* Values can range from 0-127 (where 0 means 128)			*/
+#define CONFIG_OCLK_DIV			(16)
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_SIZE		128
+
+#define CONFIG_SMC_GCTL_VAL	0x00000010
+#define CONFIG_SMC_B0CTL_VAL	0x01007011
+#define CONFIG_SMC_B0TIM_VAL	0x08170977
+#define CONFIG_SMC_B0ETIM_VAL	0x00092231
+
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)
+
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK
+#define CONFIG_NETCONSOLE
+#define CONFIG_NET_MULTI
+#define CONFIG_HOSTNAME		"bf609-ezkit"
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_PORTS		1
+#define CONFIG_DW_AUTONEG
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_MII
+
+/* i2c Settings */
+#define CONFIG_BFIN_TWI_I2C
+#define CONFIG_HARD_I2C
+
+/*
+ * Flash Settings
+ */
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_JFFS2
+#define CONFIG_SYS_FLASH_CFI_WIDTH     2
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE          0xb0000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      131
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI6XX
+#define CONFIG_ENV_SPI_MAX_HZ	25000000
+#define CONFIG_SF_DEFAULT_SPEED	25000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ALL
+
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET       0x10000
+#define CONFIG_ENV_SIZE         0x2000
+#define CONFIG_ENV_SECT_SIZE    0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET       0x60000
+#define CONFIG_ENV_SIZE         0x20000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET       0x8000
+#define CONFIG_ENV_SIZE         0x8000
+#define CONFIG_ENV_SECT_SIZE    0x8000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0"
+
+/*
+ * SDH Settings
+ */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_BFIN_SDH
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_UART_CONSOLE	0
+
+#define CONFIG_CMD_MEMORY
+
+#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4)
+#define CONFIG_BFIN_SOFT_SWITCH
+
+#if 0
+#define CONFIG_UART_MEM 1024
+#undef CONFIG_UART_CONSOLE
+#undef CONFIG_JTAG_CONSOLE
+#undef CONFIG_UART_CONSOLE_IS_JTAG
+#endif
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+#endif