Merge with git://www.denx.de/git/u-boot.git

1 files changed, 502 insertions, 0 deletions

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
new file mode 100644
index 0000000..f6755ac
--- /dev/null
+++ b/include/configs/bf537-stamp.h
@@ -0,0 +1,502 @@
+/*
+ * U-boot - Configuration file for BF537 STAMP board
+ */
+
+#ifndef __CONFIG_BF537_H__
+#define __CONFIG_BF537_H__
+
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_BAUDRATE		57600
+/* Set default serial console for bf537 */
+#define CONFIG_UART_CONSOLE	0
+#define CONFIG_BF537		1
+#define CONFIG_BOOTDELAY	5
+/* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/
+/*#define CONFIG_BF537_STAMP_LEDCMD	1*/
+
+/*
+ * Boot Mode Set
+ * Blackfin can support several boot modes
+ */
+#define BF537_BYPASS_BOOT	0x0011	/* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM)  */
+#define BF537_PARA_BOOT		0x0012	/* Bootmode 1: Boot from 8-bit or 16-bit flash                          */
+#define BF537_SPI_MASTER_BOOT	0x0014	/* Bootmode 3: SPI master mode boot from SPI flash                      */
+#define BF537_SPI_SLAVE_BOOT	0x0015	/* Bootmode 4: SPI slave mode boot from SPI flash                       */
+#define BF537_TWI_MASTER_BOOT	0x0016	/* Bootmode 5: TWI master mode boot from EEPROM                         */
+#define BF537_TWI_SLAVE_BOOT	0x0017	/* Bootmode 6: TWI slave mode boot from EEPROM                          */
+#define BF537_UART_BOOT		0x0018	/* Bootmode 7: UART slave mdoe boot via UART host                       */
+/* Define the boot mode */
+#define BFIN_BOOT_MODE		BF537_BYPASS_BOOT
+
+#define CONFIG_PANIC_HANG 1
+
+#define ADSP_BF534		0x34
+#define ADSP_BF536		0x36
+#define ADSP_BF537		0x37
+#define BFIN_CPU		ADSP_BF537
+
+/* This sets the default state of the cache on U-Boot's boot */
+#define CONFIG_ICACHE_ON
+#define CONFIG_DCACHE_ON
+
+/* Define if want to do post memory test */
+#undef CONFIG_POST_TEST
+
+/* Define where the uboot will be loaded by on-chip boot rom */
+#define APP_ENTRY 0x00001000
+
+#define CONFIG_RTC_BFIN		1
+#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
+
+/* CONFIG_CLKIN_HZ is any value in Hz				*/
+#define CONFIG_CLKIN_HZ		25000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
+/*						    1=CLKIN/2	*/
+#define CONFIG_CLKIN_HALF	0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
+/*						    1=bypass PLL*/
+#define CONFIG_PLL_BYPASS	0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
+/* Values can range from 1-64					*/
+#define CONFIG_VCO_MULT			20
+/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
+/* Values can be 1, 2, 4, or 8 ONLY				*/
+#define CONFIG_CCLK_DIV			1
+/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/
+/* Values can range from 1-15					*/
+#define CONFIG_SCLK_DIV			5
+/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
+/* Values can range from 2-65535				*/
+/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
+#define CONFIG_SPI_BAUD			2
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+#define CONFIG_SPI_BAUD_INITBLOCK	4
+#endif
+
+#if ( CONFIG_CLKIN_HALF == 0 )
+#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#else
+#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#endif
+
+#if (CONFIG_PLL_BYPASS == 0)
+#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#else
+#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
+#endif
+
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000)
+#define CONFIG_SPI_FLASH_FAST_READ 1	/* Needed if SPI_CLK > 20 MHz */
+#else
+#undef CONFIG_SPI_FLASH_FAST_READ
+#endif
+#endif
+
+#define CONFIG_MEM_SIZE			64	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH		10	/* 8, 9, 10, 11 */
+#define CONFIG_MEM_MT48LC32M8A2_75	1
+
+#define CONFIG_LOADS_ECHO		1
+
+/*
+ * rarpb, bootp or dhcp commands will perform only a
+ * configuration lookup from the BOOTP/DHCP server
+ * but not try to load any image using TFTP
+ */
+#define CFG_AUTOLOAD			"no"
+
+/*
+ * Network Settings
+ */
+/* network support */
+#if (BFIN_CPU != ADSP_BF534)
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		BF537
+#endif
+
+#define CONFIG_ROOTPATH		/romfs
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
+/* This is the routine that copies the MAC in Flash to the 'ethaddr' setting */
+
+#define CFG_LONGHELP		1
+#define CONFIG_BOOTDELAY	5
+#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
+#define CONFIG_BOOTCOMMAND 	"run ramboot"
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST)
+/* POST support */
+#define CONFIG_POST 		( CFG_POST_MEMORY | \
+				  CFG_POST_UART	  | \
+				  CFG_POST_FLASH  | \
+				  CFG_POST_ETHER  | \
+				  CFG_POST_LED	  | \
+				  CFG_POST_BUTTON)
+#else
+#undef CONFIG_POST
+#endif
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG	CFG_CMD_DIAG
+#define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
+#define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
+#else
+#define CFG_CMD_POST_DIAG	0
+#endif
+
+/* CF-CARD IDE-HDD Support */
+
+/* #define CONFIG_BFIN_TRUE_IDE */	/* Add CF flash card support */
+/* #define CONFIG_BFIN_CF_IDE */	/* Add CF flash card support */
+/* #define CONFIG_BFIN_HDD_IDE */	/* Add IDE Disk Drive (HDD) support */
+
+#if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE)
+# define CONFIG_BFIN_IDE	1
+# define ADD_IDE_CMD		CFG_CMD_IDE
+#else
+# define ADD_IDE_CMD		0
+#endif
+
+/*#define CONFIG_BF537_NAND */		/* Add nand flash support */
+
+#ifdef CONFIG_BF537_NAND
+# define ADD_NAND_CMD		CFG_CMD_NAND
+#else
+# define ADD_NAND_CMD		0
+#endif
+
+#define CONFIG_NETCONSOLE	1
+#define CONFIG_NET_MULTI	1
+
+#if (BFIN_CPU == ADSP_BF534)
+#define CONFIG_BFIN_CMD		(CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#else
+#define CONFIG_BFIN_CMD		(CONFIG_CMD_DFL | CFG_CMD_PING)
+#endif
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
+#define CONFIG_COMMANDS		(CONFIG_BFIN_CMD| \
+				 CFG_CMD_ELF	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_CACHE  | \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_DHCP   | \
+				 ADD_IDE_CMD	| \
+				 ADD_NAND_CMD	| \
+				 CFG_CMD_POST_DIAG | \
+				 CFG_CMD_DATE)
+#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+#define CONFIG_COMMANDS		(CONFIG_BFIN_CMD| \
+				 CFG_CMD_ELF	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_CACHE  | \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_EEPROM | \
+				 ADD_IDE_CMD	| \
+				 CFG_CMD_DATE)
+#endif
+
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
+#define CONFIG_LOADADDR	0x1000000
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
+#if (BFIN_CPU != ADSP_BF534)
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
+	"nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\
+	"addip=setenv bootargs $(bootargs) "			\
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+	":$(hostname):eth0:off\0"				\
+	"ramboot=tftpboot $(loadaddr) linux;"			\
+	"run ramargs;run addip;bootelf\0"			\
+	"nfsboot=tftpboot $(loadaddr) linux;"			\
+	"run nfsargs;run addip;bootelf\0"			\
+	"flashboot=bootm 0x20100000\0"				\
+	"update=tftpboot $(loadaddr) u-boot.bin;"		\
+	"protect off 0x20000000 0x2007FFFF;"			\
+	"erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0"	\
+	""
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	\
+	"flashboot=bootm 0x20100000\0"				\
+	""
+#endif
+#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+#if (BFIN_CPU != ADSP_BF534)
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
+	"nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\
+	"addip=setenv bootargs $(bootargs) "			\
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+	":$(hostname):eth0:off\0"				\
+	"ramboot=tftpboot $(loadaddr) linux;"			\
+	"run ramargs;run addip;bootelf\0"			\
+	"nfsboot=tftpboot $(loadaddr) linux;"			\
+	"run nfsargs;run addip;bootelf\0"			\
+	"flashboot=bootm 0x20100000\0"				\
+	"update=tftpboot $(loadaddr) u-boot.ldr;"		\
+	"eeprom write $(loadaddr) 0x0 $(filesize);\0"		\
+	""
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	\
+	"flashboot=bootm 0x20100000\0"				\
+	""
+#endif
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+#if (BFIN_CPU == ADSP_BF534)
+#define	CFG_PROMPT		"serial_bf534> "	/* Monitor Command Prompt */
+#elif (BFIN_CPU == ADSP_BF536)
+#define	CFG_PROMPT		"serial_bf536> "	/* Monitor Command Prompt */
+#else
+#define	CFG_PROMPT		"serial_bf537> "	/* Monitor Command Prompt */
+#endif
+#else
+#if (BFIN_CPU == ADSP_BF534)
+#define	CFG_PROMPT		"bf534> "	/* Monitor Command Prompt */
+#elif (BFIN_CPU == ADSP_BF536)
+#define	CFG_PROMPT		"bf536> "	/* Monitor Command Prompt */
+#else
+#define	CFG_PROMPT		"bf537> "	/* Monitor Command Prompt */
+#endif
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#else
+#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#endif
+#define CFG_MAX_RAM_SIZE       	(CONFIG_MEM_SIZE * 1024*1024)
+#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define	CFG_MAXARGS		16	/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_MEMTEST_START	0x0	/* memtest works on */
+#define CFG_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
+#define	CFG_LOAD_ADDR		CONFIG_LOADADDR	/* default load address */
+#define	CFG_HZ			1000	/* decrementer freq: 10 ms ticks */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define	CFG_SDRAM_BASE		0x00000000
+
+#define CFG_FLASH_BASE		0x20000000
+
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_SIZE	0x4000
+#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT)
+/* for bf537-stamp, usrt boot mode still store env in flash */
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x20004000
+#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
+#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0x4000
+#define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */
+#endif
+#define CFG_ENV_SIZE		0x2000
+#define	CFG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
+/* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */
+#define ENV_IS_EMBEDDED
+/* #endif */
+
+/* JFFS Partition offset set  */
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	1
+/* 512k reserved for u-boot */
+#define CFG_JFFS2_FIRST_SECTOR	15
+
+#define CONFIG_SPI
+
+/*
+ * Stack sizes
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+
+#define POLL_MODE		1
+#define FLASH_TOT_SECT		71
+#define FLASH_SIZE		0x400000
+#define CFG_FLASH_SIZE		0x400000
+
+/*
+ * Board NAND Infomation
+ */
+
+#define CFG_NAND_ADDR		0x20212000
+#define CFG_NAND_BASE		CFG_NAND_ADDR
+#define CFG_MAX_NAND_DEVICE	1
+#define SECTORSIZE		512
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+#define NAND_ChipID_UNKNOWN	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+#define BFIN_NAND_READY		PF3
+
+#define NAND_WAIT_READY(nand)  			\
+	do { 					\
+		int timeout = 0; 		\
+		while(!(*pPORTFIO & PF3)) 	\
+			if (timeout++ > 100000)	\
+				break;		\
+	} while (0)
+
+#define BFIN_NAND_CLE		(1<<2)	/* A2 -> Command Enable */
+#define BFIN_NAND_ALE		(1<<1)	/* A1 -> Address Enable */
+
+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_CLE) = (__u8)(d); } while(0)
+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_ALE) = (__u8)(d); } while(0)
+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
+
+/*
+ * Initialize PSD4256 registers for using I2C
+ */
+#define CONFIG_MISC_INIT_R
+
+#define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
+
+/*
+ * I2C settings
+ * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
+ */
+/* #define CONFIG_SOFT_I2C	1*/	/* I2C bit-banged */
+#define CONFIG_HARD_I2C		1	/* I2C TWI */
+#if defined CONFIG_HARD_I2C
+#define CONFIG_TWICLK_KHZ	50
+#endif
+
+#if defined CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PF_SCL			PF0
+#define PF_SDA			PF1
+
+#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
+#define I2C_SDA(bit)		if(bit) { \
+					*pFIO_FLAG_S = PF_SDA; \
+					asm("ssync;"); \
+					} \
+				else    { \
+					*pFIO_FLAG_C = PF_SDA; \
+					asm("ssync;"); \
+					}
+#define I2C_SCL(bit)		if(bit) { \
+					*pFIO_FLAG_S = PF_SCL; \
+					asm("ssync;"); \
+					} \
+				else    { \
+					*pFIO_FLAG_C = PF_SCL; \
+					asm("ssync;"); \
+					}
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+#endif
+
+#define CFG_I2C_SPEED		50000
+#define CFG_I2C_SLAVE		0xFE
+
+/* 0xFF, 0x7BB07BB0, 0x22547BB0 */
+/* #define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
+				~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
+#define AMBCTL1VAL		(B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \
+				B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
+*/
+
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0x7BB07BB0
+#define AMBCTL1VAL		0xFFC27BB0
+
+#define CONFIG_VDSP		1
+
+#ifdef CONFIG_VDSP
+#define ET_EXEC_VDSP		0x8
+#define SHT_STRTAB_VDSP		0x1
+#define ELFSHDRSIZE_VDSP	0x2C
+#define VDSP_ENTRY_ADDR		0xFFA00000
+#endif
+
+#if defined(CONFIG_BFIN_IDE)
+
+#define CONFIG_DOS_PARTITION	1
+/*
+ * IDE/ATA stuff
+ */
+#undef  CONFIG_IDE_8xx_DIRECT	/* no pcmcia interface required */
+#undef  CONFIG_IDE_LED		/* no led for ide supported */
+#undef  CONFIG_IDE_RESET	/* no reset for ide supported */
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1)	/* max. 1 drives per IDE bus */
+
+#undef  AMBCTL1VAL
+#define AMBCTL1VAL		0xFFC3FFC3
+
+#define CONFIG_CF_ATASEL_DIS	0x20311800
+#define CONFIG_CF_ATASEL_ENA	0x20311802
+
+#if defined(CONFIG_BFIN_TRUE_IDE)
+/*
+ * Note that these settings aren't for the most part used in include/ata.h
+ * when all of the ATA registers are setup
+ */
+#define CFG_ATA_BASE_ADDR	0x2031C000
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
+#define CFG_ATA_STRIDE		2	/* CF.A0 --> Blackfin.Ax */
+#endif				/* CONFIG_BFIN_TRUE_IDE */
+
+#if defined(CONFIG_BFIN_CF_IDE)	/* USE CompactFlash Storage Card in the common memory space */
+#define CFG_ATA_BASE_ADDR	0x20211800
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET	0x000E	/* Offset for alternate registers */
+#define CFG_ATA_STRIDE		1	/* CF.A0 --> Blackfin.Ax */
+#endif				/* CONFIG_BFIN_CF_IDE */
+
+#if defined(CONFIG_BFIN_HDD_IDE)	/* USE TRUE IDE */
+#define CFG_ATA_BASE_ADDR	0x20314000
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
+#define CFG_ATA_STRIDE		2	/* CF.A0 --> Blackfin.A1 */
+
+#undef  CONFIG_SCLK_DIV
+#define CONFIG_SCLK_DIV		8
+#endif				/* CONFIG_BFIN_HDD_IDE */
+
+#endif				/*CONFIG_BFIN_IDE */
+
+#endif