Merge with /home/wd/git/u-boot/custodian/u-boot-blackfin

1 files changed, 467 insertions, 0 deletions

diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
new file mode 100644
index 0000000..79a1404
--- /dev/null
+++ b/include/configs/bf533-stamp.h
@@ -0,0 +1,467 @@
+/*
+ * U-boot - Configuration file for BF533 STAMP board
+ */
+
+#ifndef __CONFIG_STAMP_H__
+#define __CONFIG_STAMP_H__
+
+#define CONFIG_STAMP			1
+#define CONFIG_RTC_BFIN			1
+#define CONFIG_BF533			1
+/*
+ * Boot Mode Set
+ * Blackfin can support several boot modes
+ */
+#define BF533_BYPASS_BOOT	0x0001	/* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
+#define BF533_PARA_BOOT		0x0002	/* Bootmode 1: Boot from 8-bit or 16-bit flash */
+#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash */
+/* Define the boot mode */
+#define BFIN_BOOT_MODE		BF533_BYPASS_BOOT
+/* #define BFIN_BOOT_MODE	BF533_SPI_BOOT */
+
+#define CONFIG_PANIC_HANG 1
+
+#define ADSP_BF531		0x31
+#define ADSP_BF532		0x32
+#define ADSP_BF533		0x33
+#define BFIN_CPU		ADSP_BF533
+
+/* This sets the default state of the cache on U-Boot's boot */
+#define CONFIG_ICACHE_ON
+#define CONFIG_DCACHE_ON
+
+/* Define where the uboot will be loaded by on-chip boot rom */
+#define APP_ENTRY 0x00001000
+
+/*
+ * Stringize definitions - needed for environmental settings
+ */
+#define STRINGIZE2(x) #x
+#define STRINGIZE(x) STRINGIZE2(x)
+
+/*
+ * Board settings
+ */
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x20300300
+
+/* FLASH/ETHERNET uses the same address range */
+#define SHARED_RESOURCES 	1
+
+/* Is I2C bit-banged? */
+#define CONFIG_SOFT_I2C		1
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PF_SCL			PF3
+#define PF_SDA			PF2
+
+/*
+ * Video splash screen support
+ */
+#define  CONFIG_VIDEO		0
+
+#define CONFIG_VDSP		1
+
+/*
+ * Clock settings
+ */
+
+/* CONFIG_CLKIN_HZ is any value in Hz				*/
+#define CONFIG_CLKIN_HZ		11059200
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
+/*						    1=CLKIN/2	*/
+#define CONFIG_CLKIN_HALF	0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
+/*						 1=bypass PLL	*/
+#define CONFIG_PLL_BYPASS	0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
+/* Values can range from 1-64					*/
+#define CONFIG_VCO_MULT		36
+/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
+/* Values can be 1, 2, 4, or 8 ONLY				*/
+#define CONFIG_CCLK_DIV		1
+/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/
+/* Values can range from 1-15					*/
+#define CONFIG_SCLK_DIV		5
+/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
+/* Values can range from 2-65535				*/
+/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
+#define CONFIG_SPI_BAUD		2
+
+#if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#define CONFIG_SPI_BAUD_INITBLOCK	4
+#endif
+
+/*
+ * Network settings
+ */
+
+#if (CONFIG_DRIVER_SMC91111)
+#if 0
+#define	CONFIG_MII
+#endif
+
+/* network support */
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		STAMP
+#define CONFIG_ROOTPATH		/checkout/uClinux-dist/romfs
+
+/* To remove hardcoding and enable MAC storage in EEPROM  */
+/* #define CONFIG_ETHADDR		02:80:ad:20:31:b8 */
+#endif /* CONFIG_DRIVER_SMC91111 */
+
+/*
+ * Flash settings
+ */
+
+#define CFG_FLASH_CFI		/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER	/* Use common CFI driver	*/
+#define	CFG_FLASH_CFI_AMD_RESET
+
+#define CFG_FLASH_BASE		0x20000000
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
+
+#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x20004000
+#define	CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
+#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0x4000
+#define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
+#endif
+
+#define	CFG_ENV_SIZE		0x2000
+#define CFG_ENV_SECT_SIZE 	0x2000	/* Total Size of Environment Sector */
+#define	ENV_IS_EMBEDDED
+
+#define CFG_FLASH_ERASE_TOUT	30000	/* Timeout for Chip Erase (in ms) */
+#define CFG_FLASH_ERASEBLOCK_TOUT	5000	/* Timeout for Block Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms) */
+
+/* JFFS Partition offset set  */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_NUM_BANKS  1
+/* 512k reserved for u-boot */
+#define CFG_JFFS2_FIRST_SECTOR 	11
+
+/*
+ * following timeouts shall be used once the
+ * Flash real protection is enabled
+ */
+#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+
+/*
+ * SDRAM settings & memory map
+ */
+
+#define CONFIG_MEM_SIZE		128	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH     11	/* 8, 9, 10, 11    */
+#define CONFIG_MEM_MT48LC64M4A2FB_7E	1
+
+#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
+#define CFG_MEMTEST_START	0x00000000	/* memtest works on */
+#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#endif
+
+#define	CFG_SDRAM_BASE		0x00000000
+
+#define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 *1024)
+#define CFG_MEMTEST_END		(CFG_MAX_RAM_SIZE - 0x80000 - 1)
+#define CONFIG_LOADADDR		0x01000000
+
+#define CFG_LOAD_ADDR 		CONFIG_LOADADDR
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)     /* Reserve 128 kB for malloc()	*/
+#define CFG_GBL_DATA_SIZE	0x4000		/* Reserve 16k for Global Data  */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+
+#define CFG_MONITOR_BASE		(CFG_MAX_RAM_SIZE - 0x40000)
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+
+/* Check to make sure everything fits in SDRAM */
+#if ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) > CFG_MAX_RAM_SIZE)
+	#error Memory Map does not fit into configuration
+#endif
+
+#if ( CONFIG_CLKIN_HALF == 0 )
+#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#else
+#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#endif
+
+#if (CONFIG_PLL_BYPASS == 0)
+#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#else
+#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
+#endif
+
+#if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000)
+#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */
+#else
+#undef CONFIG_SPI_FLASH_FAST_READ
+#endif
+#endif
+
+/*
+ * Command settings
+ */
+
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
+#define CFG_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
+#endif
+
+/* configuration lookup from the BOOTP/DHCP server, */
+/* but not try to load any image using TFTP	    */
+
+#define CONFIG_BOOTDELAY	5
+#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
+#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
+#define CONFIG_BOOTCOMMAND	"run ramboot"
+#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#define CONFIG_BOOTCOMMAND 	"eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000"
+#endif
+
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
+
+#if (CONFIG_DRIVER_SMC91111)
+#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL | \
+				 CFG_CMD_PING   | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_CACHE  | \
+				 CFG_CMD_JFFS2  | \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_DATE)
+
+#else
+#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_CACHE  | \
+				 CFG_CMD_JFFS2  | \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_DATE)
+#endif
+
+#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
+#if (CONFIG_DRIVER_SMC91111)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
+		"$(rootpath) console=ttyBF0,57600\0" \
+	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
+		"$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
+	"ramboot=tftpboot $(loadaddr) linux; " \
+		"run ramargs;run addip;bootelf\0" \
+	"nfsboot=tftpboot $(loadaddr) linux; " \
+		"run nfsargs;run addip;bootelf\0" \
+	"flashboot=bootm 0x20100000\0" \
+	"update=tftpboot $(loadaddr) u-boot.bin; " \
+		"protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \
+		"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
+	""
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+	"flashboot=bootm 0x20100000\0" \
+	"
+#endif
+
+#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
+		"$(rootpath) console=ttyBF0,57600\0"	\
+	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
+		"$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
+	"ramboot=tftpboot $(loadaddr) linux; " \
+		"run ramargs;run addip;bootelf\0" \
+	"nfsboot=tftpboot $(loadaddr) linux; "	\
+		"run nfsargs;run addip;bootelf\0" \
+	"flashboot=bootm 0x20100000\0" \
+	"update=tftpboot $(loadaddr) u-boot.ldr;"	\
+		"eeprom write $(loadaddr) 0x0 $(filesize);\0"\
+	""
+#endif
+
+#ifdef CONFIG_SOFT_I2C
+#if (!CONFIG_SOFT_I2C)
+#undef CONFIG_SOFT_I2C
+#endif
+#endif
+
+#if (CONFIG_SOFT_I2C)
+#define CONFIG_COMMANDS2   CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS2 0
+#endif /* CONFIG_SOFT_I2C */
+
+#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
+#define CONFIG_COMMANDS  ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP)
+#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#define CONFIG_COMMANDS  ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2)
+#endif
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Console settings
+ */
+
+#define CONFIG_BAUDRATE		57600
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+#if (BFIN_CPU == ADSP_BF531)
+#define	CFG_PROMPT	"serial_bf531> "	/* Monitor Command Prompt */
+#elif (BFIN_CPU == ADSP_BF532)
+#define	CFG_PROMPT	"serial_bf532> "	/* Monitor Command Prompt */
+#else
+#define	CFG_PROMPT	"serial_bf533> "	/* Monitor Command Prompt */
+#endif
+#else
+#if (BFIN_CPU == ADSP_BF531)
+#define	CFG_PROMPT	"bf531> "	/* Monitor Command Prompt */
+#elif (BFIN_CPU == ADSP_BF532)
+#define	CFG_PROMPT	"bf532> "	/* Monitor Command Prompt */
+#else
+#define	CFG_PROMPT	"bf533> "	/* Monitor Command Prompt */
+#endif
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CONFIG_LOADS_ECHO	1
+
+/*
+ * I2C settings
+ * By default PF2 is used as SDA and PF3 as SCL on the Stamp board
+ */
+#if (CONFIG_SOFT_I2C)
+
+#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
+#define I2C_SDA(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SDA; \
+				asm("ssync;"); \
+				} \
+			else	{ \
+				*pFIO_FLAG_C = PF_SDA; \
+				asm("ssync;"); \
+				}
+#define I2C_SCL(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SCL; \
+				asm("ssync;"); \
+				} \
+			else	{ \
+				*pFIO_FLAG_C = PF_SCL; \
+				asm("ssync;"); \
+				}
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+
+#define CFG_I2C_SPEED		50000
+#define CFG_I2C_SLAVE		0xFE
+#endif /* CONFIG_SOFT_I2C */
+
+/*
+ * Compact Flash settings
+ */
+
+/* Enabled below option for CF support */
+/* #define CONFIG_STAMP_CF	1 */
+
+#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE)
+
+#define CONFIG_MISC_INIT_R	1
+#define CONFIG_DOS_PARTITION	1
+/*
+ * IDE/ATA stuff
+ */
+#undef  CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef  CONFIG_IDE_LED			/* no led for ide supported */
+#undef  CONFIG_IDE_RESET		/* no reset for ide supported */
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR	0x20200000
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET	0x0007	/* Offset for alternate registers */
+
+#define CFG_ATA_STRIDE		2
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define	CFG_HZ			1000	/* 1ms time tick */
+
+#define CFG_BOOTM_LEN		0x4000000/* Large Image Length, set to 64 Meg */
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1	/* Show boot progress on LEDs */
+
+#define CONFIG_SPI
+
+#ifdef  CONFIG_VIDEO
+#if (CONFIG_VIDEO)
+#define CONFIG_SPLASH_SCREEN	1
+#define CONFIG_SILENT_CONSOLE	1
+#else
+#undef CONFIG_VIDEO
+#endif
+#endif
+
+/*
+ * FLASH organization and environment definitions
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */
+
+/* 0xFF, 0xBBC3BBc3, 0x99B39983 */
+/*#define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \
+				B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
+#define AMBCTL1VAL   		(B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \
+				B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
+*/
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0xBBC3BBC3
+#define AMBCTL1VAL		0x99B39983
+#define CF_AMBCTL1VAL		0x99B3ffc2
+
+#ifdef CONFIG_VDSP
+#define ET_EXEC_VDSP		0x8
+#define SHT_STRTAB_VDSP		0x1
+#define ELFSHDRSIZE_VDSP	0x2C
+#define VDSP_ENTRY_ADDR		0xFFA00000
+#endif
+
+#endif