Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup.

1 files changed, 49 insertions, 20 deletions

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 458ebab..beaf385 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -62,11 +62,14 @@
  */
 #define CFG_PLL0_OPT			0x04
 
-#define CFG_USART1			1
-
-#define CFG_CONSOLE_UART_DEV		DEVICE_USART1
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
 
 /* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
@@ -75,16 +78,47 @@
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
-	"console=ttyUS0 root=/dev/mtdblock1 fbmem=600k"
+	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
+
+#define CONFIG_BOOTCOMMAND						\
+	"fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		2
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * These are "locally administered ethernet addresses" generated by
+ * ./tools/gen_eth_addr
+ *
+ * After booting the board for the first time, new addresses should be
+ * generated and assigned to the environment variables "ethaddr" and
+ * "eth1addr".
+ */
+#define CONFIG_ETHADDR			"6a:87:71:14:cd:cb"
+#define CONFIG_ETH1ADDR			"ca:f8:15:e6:3e:e6"
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+#define CONFIG_NET_MULTI		1
+
+#define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_SUBNETMASK	\
+					 | CONFIG_BOOTP_GATEWAY)
 
 #define CONFIG_COMMANDS			(CFG_CMD_BDI			\
 					 | CFG_CMD_LOADS		\
 					 | CFG_CMD_LOADB		\
-					 /* | CFG_CMD_IMI */		\
+					 | CFG_CMD_IMI			\
 					 /* | CFG_CMD_CACHE */		\
 					 | CFG_CMD_FLASH		\
 					 | CFG_CMD_MEMORY		\
-					 /* | CFG_CMD_NET */		\
+					 | CFG_CMD_NET			\
 					 | CFG_CMD_ENV			\
 					 /* | CFG_CMD_IRQ */		\
 					 | CFG_CMD_BOOTD		\
@@ -96,7 +130,7 @@
 					 /* | CFG_CMD_I2C */		\
 					 | CFG_CMD_REGINFO		\
 					 /* | CFG_CMD_DATE */		\
-					 /* | CFG_CMD_DHCP */		\
+					 | CFG_CMD_DHCP			\
 					 /* | CFG_CMD_AUTOSCRIPT */	\
 					 /* | CFG_CMD_MII */		\
 					 | CFG_CMD_MISC			\
@@ -106,19 +140,22 @@
 					 /* | CFG_CMD_SAVES */		\
 					 /* | CFG_CMD_SPI */		\
 					 /* | CFG_CMD_PING */		\
-					 /* | CFG_CMD_MMC */		\
-					 /* | CFG_CMD_FAT */		\
-					 /* | CFG_CMD_IMLS */		\
+					 | CFG_CMD_MMC			\
+					 | CFG_CMD_FAT			\
+					 | CFG_CMD_IMLS			\
 					 /* | CFG_CMD_ITEST */		\
-					 /* | CFG_CMD_EXT2 */		\
+					 | CFG_CMD_EXT2			\
+					 | CFG_CMD_JFFS2		\
 		)
 
 #include <cmd_confdefs.h>
 
 #define CONFIG_ATMEL_USART		1
+#define CONFIG_MACB			1
 #define CONFIG_PIO2			1
 #define CFG_NR_PIOS			5
 #define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
 
 #define CFG_DCACHE_LINESZ		32
 #define CFG_ICACHE_LINESZ		32
@@ -150,16 +187,8 @@
 #define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
 
 #define CFG_MALLOC_LEN			(256*1024)
-#define CFG_MALLOC_END							\
-	({								\
-		DECLARE_GLOBAL_DATA_PTR;				\
-		CFG_SDRAM_BASE + gd->sdram_size;			\
-	})
-#define CFG_MALLOC_START		(CFG_MALLOC_END - CFG_MALLOC_LEN)
-
 #define CFG_DMA_ALLOC_LEN		(16384)
-#define CFG_DMA_ALLOC_END		(CFG_MALLOC_START)
-#define CFG_DMA_ALLOC_START		(CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN)
+
 /* Allow 2MB for the kernel run-time image */
 #define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)