Rename ads5121 board into mpc5121ads

We rename the board so we use a consistent name in U-Boot and in
Linux.  Also, we use this opportunity to move the board into the
Freecale vendor directory.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>

1 files changed, 0 insertions, 550 deletions

diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
deleted file mode 100644
index b1420fa..0000000
--- a/include/configs/ads5121.h
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * (C) Copyright 2007, 2008 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * ADS5121 board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ADS5121 1
-/*
- * Memory map for the ADS5121 board:
- *
- * 0x0000_0000 - 0x0FFF_FFFF	DDR RAM (256 MB)
- * 0x3000_0000 - 0x3001_FFFF	SRAM (128 KB)
- * 0x8000_0000 - 0x803F_FFFF	IMMR (4 MB)
- * 0x8200_0000 - 0x8200_001F	CPLD (32 B)
- * 0x8400_0000 - 0x82FF_FFFF	PCI I/O space (16 MB)
- * 0xA000_0000 - 0xAFFF_FFFF	PCI memory space (256 MB)
- * 0xB000_0000 - 0xBFFF_FFFF	PCI memory mapped I/O space (256 MB)
- * 0xFC00_0000 - 0xFFFF_FFFF	NOR Boot FLASH (64 MB)
- */
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1	/* E300 Family */
-#define CONFIG_MPC512X		1	/* MPC512X family */
-#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
-#undef CONFIG_FSL_DIU_LOGO_BMP		/* Don't include FSL DIU binary bmp */
-
-/* video */
-#undef CONFIG_VIDEO
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#endif
-
-/* CONFIG_PCI is defined at config time */
-
-#ifdef CONFIG_ADS5121_REV2
-#define CONFIG_SYS_MPC512X_CLKIN	66000000	/* in Hz */
-#else
-#define CONFIG_SYS_MPC512X_CLKIN	33333333	/* in Hz */
-#define CONFIG_PCI
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_SYS_IMMR		0x80000000
-#define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_IMMR+0x2100)
-
-#define CONFIG_SYS_MEMTEST_START	0x00200000      /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-/*
- * DDR Setup - manually set all parameters as there's no SPD etc.
- */
-#ifdef CONFIG_ADS5121_REV2
-#define CONFIG_SYS_DDR_SIZE		256		/* MB */
-#else
-#define CONFIG_SYS_DDR_SIZE		512		/* MB */
-#endif
-#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-
-/* DDR Controller Configuration
- *
- * SYS_CFG:
- *	[31:31]	MDDRC Soft Reset:	Diabled
- *	[30:30]	DRAM CKE pin:		Enabled
- *	[29:29]	DRAM CLK:		Enabled
- *	[28:28]	Command Mode:		Enabled (For initialization only)
- *	[27:25]	DRAM Row Select:	dram_row[15:0] = magenta_address[25:10]
- *	[24:21]	DRAM Bank Select:	dram_bank[1:0] = magenta_address[11:10]
- *	[20:19]	Read Test:		DON'T USE
- *	[18:18]	Self Refresh:		Enabled
- *	[17:17]	16bit Mode:		Disabled
- *	[16:13] Ready Delay:		2
- *	[12:12]	Half DQS Delay:		Disabled
- *	[11:11]	Quarter DQS Delay:	Disabled
- *	[10:08]	Write Delay:		2
- *	[07:07]	Early ODT:		Disabled
- *	[06:06]	On DIE Termination:	Disabled
- *	[05:05]	FIFO Overflow Clear:	DON'T USE here
- *	[04:04]	FIFO Underflow Clear:	DON'T USE here
- *	[03:03]	FIFO Overflow Pending:	DON'T USE here
- *	[02:02]	FIFO Underlfow Pending:	DON'T USE here
- *	[01:01]	FIFO Overlfow Enabled:	Enabled
- *	[00:00]	FIFO Underflow Enabled:	Enabled
- * TIME_CFG0
- *	[31:16]	DRAM Refresh Time:	0 CSB clocks
- *	[15:8]	DRAM Command Time:	0 CSB clocks
- *	[07:00]	DRAM Precharge Time:	0 CSB clocks
- * TIME_CFG1
- *	[31:26]	DRAM tRFC:
- *	[25:21]	DRAM tWR1:
- *	[20:17]	DRAM tWRT1:
- *	[16:11]	DRAM tDRR:
- *	[10:05]	DRAM tRC:
- *	[04:00]	DRAM tRAS:
- * TIME_CFG2
- *	[31:28]	DRAM tRCD:
- *	[27:23]	DRAM tFAW:
- *	[22:19]	DRAM tRTW1:
- *	[18:15]	DRAM tCCD:
- *	[14:10] DRAM tRTP:
- *	[09:05]	DRAM tRP:
- *	[04:00] DRAM tRPA
- */
-#ifdef CONFIG_ADS5121_REV2
-#define CONFIG_SYS_MDDRC_SYS_CFG	0xF8604A00
-#define CONFIG_SYS_MDDRC_SYS_CFG_RUN	0xE8604A00
-#define CONFIG_SYS_MDDRC_TIME_CFG1	0x54EC1168
-#define CONFIG_SYS_MDDRC_TIME_CFG2	0x35210864
-#else
-#define CONFIG_SYS_MDDRC_SYS_CFG	 0xFA804A00
-#define CONFIG_SYS_MDDRC_SYS_CFG_RUN	 0xEA804A00
-#define CONFIG_SYS_MDDRC_TIME_CFG1	 0x68EC1168
-#define CONFIG_SYS_MDDRC_TIME_CFG2	 0x34310864
-#endif
-#define CONFIG_SYS_MDDRC_SYS_CFG_EN	0xF0000000
-#define CONFIG_SYS_MDDRC_TIME_CFG0	0x00003D2E
-#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN	0x06183D2E
-
-#define CONFIG_SYS_MICRON_NOP		0x01380000
-#define CONFIG_SYS_MICRON_PCHG_ALL	0x01100400
-#define CONFIG_SYS_MICRON_EM2		0x01020000
-#define CONFIG_SYS_MICRON_EM3		0x01030000
-#define CONFIG_SYS_MICRON_EN_DLL	0x01010000
-#define CONFIG_SYS_MICRON_RFSH		0x01080000
-#define CONFIG_SYS_MICRON_INIT_DEV_OP	0x01000432
-#define CONFIG_SYS_MICRON_OCD_DEFAULT	0x01010780
-
-/* DDR Priority Manager Configuration */
-#define CONFIG_SYS_MDDRCGRP_PM_CFG1	0x00077777
-#define CONFIG_SYS_MDDRCGRP_PM_CFG2	0x00000000
-#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG	0x00000001
-#define CONFIG_SYS_MDDRCGRP_LUT0_MU	0xFFEEDDCC
-#define CONFIG_SYS_MDDRCGRP_LUT0_ML	0xBBAAAAAA
-#define CONFIG_SYS_MDDRCGRP_LUT1_MU	0x66666666
-#define CONFIG_SYS_MDDRCGRP_LUT1_ML	0x55555555
-#define CONFIG_SYS_MDDRCGRP_LUT2_MU	0x44444444
-#define CONFIG_SYS_MDDRCGRP_LUT2_ML	0x44444444
-#define CONFIG_SYS_MDDRCGRP_LUT3_MU	0x55555555
-#define CONFIG_SYS_MDDRCGRP_LUT3_ML	0x55555558
-#define CONFIG_SYS_MDDRCGRP_LUT4_MU	0x11111111
-#define CONFIG_SYS_MDDRCGRP_LUT4_ML	0x11111122
-#define CONFIG_SYS_MDDRCGRP_LUT0_AU	0xaaaaaaaa
-#define CONFIG_SYS_MDDRCGRP_LUT0_AL	0xaaaaaaaa
-#define CONFIG_SYS_MDDRCGRP_LUT1_AU	0x66666666
-#define CONFIG_SYS_MDDRCGRP_LUT1_AL	0x66666666
-#define CONFIG_SYS_MDDRCGRP_LUT2_AU	0x11111111
-#define CONFIG_SYS_MDDRCGRP_LUT2_AL	0x11111111
-#define CONFIG_SYS_MDDRCGRP_LUT3_AU	0x11111111
-#define CONFIG_SYS_MDDRCGRP_LUT3_AL	0x11111111
-#define CONFIG_SYS_MDDRCGRP_LUT4_AU	0x11111111
-#define CONFIG_SYS_MDDRCGRP_LUT4_AL	0x11111111
-
-/*
- * NOR FLASH on the Local Bus
- */
-#undef CONFIG_BKUP_FLASH
-#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
-#ifdef CONFIG_BKUP_FLASH
-#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* start of FLASH   */
-#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* max flash size in bytes */
-#else
-#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* start of FLASH   */
-#define CONFIG_SYS_FLASH_SIZE		0x04000000	/* max flash size in bytes */
-#endif
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-
-/*
- * CPLD registers area is really only 32 bytes in size, but the smallest possible LP
- * window is 64KB
- */
-#define CONFIG_SYS_CPLD_BASE		0x82000000
-#define CONFIG_SYS_CPLD_SIZE		0x00010000	/* 64 KB */
-
-#define CONFIG_SYS_SRAM_BASE		0x30000000
-#define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */
-
-#define CONFIG_SYS_CS0_CFG		0x05059310	/* ALE active low, data size 4bytes */
-#define CONFIG_SYS_CS2_CFG		0x05059010	/* ALE active low, data size 1byte */
-#define CONFIG_SYS_CS_ALETIMING	0x00000005	/* Use alternative CS timing for CS0 and CS2 */
-
-/* Use SRAM for initial stack */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE		/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_SRAM_SIZE		/* End of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100			/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE		/* Start of monitor */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
-#ifdef	CONFIG_FSL_DIU_FB
-#define CONFIG_SYS_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
-#else
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
-#endif
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	3	/* console is on PSC3 */
-#if CONFIG_PSC_CONSOLE != 3
-#error CONFIG_PSC_CONSOLE must be 3
-#endif
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONSOLE_FIFO_TX_SIZE	FIFOC_PSC3_TX_SIZE
-#define CONSOLE_FIFO_TX_ADDR	FIFOC_PSC3_TX_ADDR
-#define CONSOLE_FIFO_RX_SIZE	FIFOC_PSC3_RX_SIZE
-#define CONSOLE_FIFO_RX_ADDR	FIFOC_PSC3_RX_ADDR
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
-/*
- * PCI
- */
-#ifdef CONFIG_PCI
-
-/*
- * General PCI
- */
-#define CONFIG_SYS_PCI_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI_MMIO_BASE	(CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE)
-#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
-#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS		0x84000000
-#define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16M */
-
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#endif
-
-/* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#if 0
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
-#endif
-
-/*
- * IIM - IC Identification Module
- */
-#undef CONFIG_IIM
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* Atmel: AT24C32A-10TQ-2.7 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* 10ms of delay */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 32-Byte Page Write Mode */
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC512x_FEC	1
-#define CONFIG_NET_MULTI
-#define CONFIG_PHY_ADDR		0x1
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_FEC_AN_TIMEOUT	1
-#define CONFIG_HAS_ETH0
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_M41T62			/* use M41T62 rtc via i2 */
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* This has to be a multiple of the Flash sector size */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE		0x2000
-#ifdef CONFIG_BKUP_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* one sector (256K) for env */
-#else
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* one sector (256K) for env */
-#endif
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DATE
-#undef CONFIG_CMD_FUSE
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_EXT2
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_CMD_IDE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
-#endif /* defined(CONFIG_CMD_IDE) */
-
-/*
- * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
- * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set
- * to 0xFFFF, watchdog timeouts after about 64s. For details refer
- * to chapter 36 of the MPC5121e Reference Manual.
- */
-/* #define CONFIG_WATCHDOG */		/* enable watchdog */
-#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
-
- /*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
-
-#ifdef CONFIG_CMD_KGDB
-	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
-
-/* Cache Configuration */
-#define CONFIG_SYS_DCACHE_SIZE		32768
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | HID0_ICE)
-#define CONFIG_SYS_HID2	HID2_HBE
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-#define CONFIG_TIMESTAMP
-
-#define CONFIG_HOSTNAME		ads5121
-#define CONFIG_BOOTFILE		ads5121/uImage
-#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
-
-#define CONFIG_LOADADDR		400000	/* default location for tftp and bootm */
-
-#define CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"u-boot_addr_r=200000\0"					\
-	"kernel_addr_r=600000\0"					\
-	"fdt_addr_r=880000\0"						\
-	"ramdisk_addr_r=900000\0"					\
-	"u-boot_addr=FFF00000\0"					\
-	"kernel_addr=FFC40000\0"					\
-	"fdt_addr=FFEC0000\0"						\
-	"ramdisk_addr=FC040000\0"					\
-	"ramdiskfile=ads5121/uRamdisk\0"				\
-	"u-boot=ads5121/u-boot.bin\0"					\
-	"bootfile=ads5121/uImage\0"					\
-	"fdtfile=ads5121/ads5121.dtb\0"					\
-	"rootpath=/opt/eldk/ppc_6xx\n"					\
-	"netdev=eth0\0"							\
-	"consdev=ttyPSC0\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} "				\
-		"console=${consdev},${baudrate}\0"			\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
-		"tftp ${fdt_addr_r} ${fdtfile};"			\
-		"run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"net_self=tftp ${kernel_addr_r} ${bootfile};"			\
-		"tftp ${ramdisk_addr_r} ${ramdiskfile};"		\
-		"tftp ${fdt_addr_r} ${fdtfile};"			\
-		"run ramargs addip addtty;"				\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\
-	"load=tftp ${u-boot_addr_r} ${u-boot}\0"			\
-	"update=protect off ${u-boot_addr} +${filesize};"		\
-		"era ${u-boot_addr} +${filesize};"			\
-		"cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0"	\
-	"upd=run load update\0"						\
-	""
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES	1
-
-#define OF_CPU			"PowerPC,5121@0"
-#define OF_SOC_COMPAT		"fsl,mpc5121-immr"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc@80000000/serial@11300"
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff
- *-----------------------------------------------------------------------
- */
-
-#undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for IDE not supported	*/
-
-#define CONFIG_IDE_RESET		/* reset for IDE supported	*/
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR	MPC512X_PATA
-
-/* Offset for data I/O			RefMan MPC5121EE Table 28-10	*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(0x00A0)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
-
-/* Offset for alternate registers	RefMan MPC5121EE Table 28-23	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	(0x00D8)
-
-/* Interval between registers	*/
-#define CONFIG_SYS_ATA_STRIDE		4
-
-#define ATA_BASE_ADDR		MPC512X_PATA
-
-/*
- * Control register bit definitions
- */
-#define FSL_ATA_CTRL_FIFO_RST_B		0x80000000
-#define FSL_ATA_CTRL_ATA_RST_B		0x40000000
-#define FSL_ATA_CTRL_FIFO_TX_EN		0x20000000
-#define FSL_ATA_CTRL_FIFO_RCV_EN	0x10000000
-#define FSL_ATA_CTRL_DMA_PENDING	0x08000000
-#define FSL_ATA_CTRL_DMA_ULTRA		0x04000000
-#define FSL_ATA_CTRL_DMA_WRITE		0x02000000
-#define FSL_ATA_CTRL_IORDY_EN		0x01000000
-
-#endif	/* __CONFIG_H */