Initial revision

1 files changed, 380 insertions, 0 deletions

diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
new file mode 100644
index 0000000..4978f7e
--- /dev/null
+++ b/include/configs/ZUMA.h
@@ -0,0 +1,380 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/processor.h>
+
+#define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */
+#define CONFIG_ETHER_PORT_MII	/* use two MII ports */
+#define CONFIG_INTEL_LXT97X	/* Intel LXT97X phy */
+
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
+#include "../board/evb64260/local.h"
+
+#define CONFIG_EVB64260		1	/* this is an EVB64260 board	*/
+#define CONFIG_ZUMA_V2		1	/* always define this for ZUMA v2 */
+
+/* #define CONFIG_ZUMA_V2_OLD	1 */	/* backwards compat for old V2 board */
+
+#define CONFIG_BAUDRATE		38400	/* console baudrate = 38400	*/
+
+#define CONFIG_ECC			/* enable ECC support */
+
+#define CONFIG_750CX			/* we have a 750CX/CXe (override local.h) */
+
+/* which initialization functions to call for this board */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_PRE_INIT
+#define CFG_BOARD_ASM_INIT
+
+#define CFG_BOARD_NAME		"Zuma APv2"
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+/*
+ * The following defines let you select what serial you want to use
+ * for your console driver.
+ *
+ * what to do:
+ * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
+ * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * to 0 below.
+ *
+ * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
+ * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
+ */
+#define CONFIG_MPSC
+
+#define CONFIG_MPSC_PORT	0
+
+#define CONFIG_NET_MULTI        /* attempt all available adapters */
+
+/* define this if you want to enable GT MAC filtering */
+#define CONFIG_GT_USE_MAC_HASH_TABLE
+
+#if 1
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_BOOTCOMMAND							\
+	"tftpboot && "								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
+	"ip=$ipaddr:$serverip:$gatewayip:"				\
+	"$netmask:$hostname:eth0:none panic=5 && bootm"
+
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#undef	CONFIG_ALTIVEC			/* undef to disable		*/
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
+				 CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MII		/* enable MII commands */
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_ASKENV | \
+				 CFG_CMD_BSP	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_DATE)
+
+/* Flash banks JFFS2 should use */
+#define CFG_JFFS2_FIRST_BANK	1
+#define CFG_JFFS2_NUM_BANKS	2
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x00300000	/* default load address */
+
+#define CFG_HZ			1000		/* decr freq: 1ms ticks */
+
+#define CFG_BUS_HZ		133000000	/* 133 MHz		*/
+
+#define CFG_BUS_CLK		CFG_BUS_HZ
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR	0x40000000
+#define CFG_INIT_RAM_END	0x1000
+#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_LOCK
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xfff00000
+#define CFG_RESET_ADDRESS	0xfff00100
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+
+/* areas to map different things with the GT in physical space */
+#define CFG_DRAM_BANKS		4
+#define CFG_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
+
+/* What to put in the bats. */
+#define CFG_MISC_REGION_BASE	0xf0000000
+
+/* Peripheral Device section */
+#define CFG_GT_REGS		0xf8000000	/* later mapped GT_REGS */
+#define CFG_DEV_BASE		0xf0000000
+#define CFG_DEV0_SIZE		_64M /* zuma flash @ 0xf000.0000*/
+#define CFG_DEV1_SIZE		 _8M /* zuma IDE   @ 0xf400.0000 */
+#define CFG_DEV2_SIZE		 _8M /* unused */
+#define CFG_DEV3_SIZE		 _8M /* unused */
+
+#define CFG_DEV0_PAR		0xc498243c
+	/*     c    4     9     8     2	    4     3     c */
+	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */
+	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
+	/* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
+	/*  3| 0|.... ..| 1| 4 |  0 |  4 |   8 |   7 | 4  */
+
+#define CFG_DEV1_PAR		0xc01b6ac5
+	/*     c    0     1     b     6	    a     c     5 */
+	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */
+	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
+	/* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */
+	/*  3| 0|.... ..| 1| 5 |  5 |  5 |   5 |   8 | 5  */
+
+
+
+#define CFG_8BIT_BOOT_PAR	0xc00b5e7c
+
+#define CFG_MPP_CONTROL_0	0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
+#define CFG_MPP_CONTROL_1	0x00000000 /* GPP[15:12] : GPP[11:8] */
+#define CFG_MPP_CONTROL_2	0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
+#define CFG_MPP_CONTROL_3	0x00000000 /* GPP[31:28] (int[3:0]) */
+					   /* GPP[27:24] (27 is int4, rest are GPP) */
+
+#define CFG_SERIAL_PORT_MUX	0x00001101 /* 11=MPSC1/MPSC0 01=ETH,  0=only MII */
+#define CFG_GPP_LEVEL_CONTROL	0xf8000000 /* interrupt inputs: GPP[31:27] */
+
+#define CFG_SDRAM_CONFIG	0xe4e18200	/* 0x448 */
+				/* idmas use buffer 1,1
+				   comm use buffer 1
+				   pci use buffer 0,0 (pci1->0 pci0->0)
+				   cpu use buffer 1 (R*18)
+				   normal load (see also ifdef HVL)
+				   standard SDRAM (see also ifdef REG)
+				   non staggered refresh */
+				/* 31:26  25 23	 20 19 18 16 */
+				/* 111001 00 111 0  0  00 1 */
+
+				/* refresh count=0x200
+				   phy interleave disable (by default,
+				   set later by dram config..)
+				   virt interleave enable */
+				/* 15 14 13:0 */
+				/* 1  0	 0x200 */
+
+#define CFG_DEV0_SPACE		CFG_DEV_BASE
+#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)
+#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)
+#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ */
+
+#define PCI_HOST_ADAPTER	0	/* configure ar pci adapter	*/
+#define PCI_HOST_FORCE		1	/* configure as pci host	*/
+#define PCI_HOST_AUTO		2	/* detected via arbiter enable	*/
+
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+
+/* PCI MEMORY MAP section */
+#define CFG_PCI0_MEM_BASE	0x80000000
+#define CFG_PCI0_MEM_SIZE	_128M
+#define CFG_PCI1_MEM_BASE	0x88000000
+#define CFG_PCI1_MEM_SIZE	_128M
+
+#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
+#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+
+/* PCI I/O MAP section */
+#define CFG_PCI0_IO_BASE	0xfa000000
+#define CFG_PCI0_IO_SIZE	_16M
+#define CFG_PCI1_IO_BASE	0xfb000000
+#define CFG_PCI1_IO_SIZE	_16M
+
+#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
+#define CFG_PCI0_IO_SPACE_PCI	0x00000000
+#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
+#define CFG_PCI1_IO_SPACE_PCI	0x00000000
+
+
+/*----------------------------------------------------------------------
+ * Initial BAT mappings
+ */
+
+/* NOTES:
+ * 1) GUARDED and WRITE_THRU not allowed in IBATS
+ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
+ */
+
+/* SDRAM */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* init ram */
+#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT1L  CFG_IBAT1L
+#define CFG_DBAT1U  CFG_IBAT1U
+
+/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
+#define CFG_IBAT2L BATL_NO_ACCESS
+#define CFG_IBAT2U CFG_DBAT2U
+#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* GT regs, bootrom, all the devices, PCI I/O */
+#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
+
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks	*/
+#define CFG_MAX_FLASH_SECT	130	/* max number of sectors on one chip */
+
+#define CFG_EXTRA_FLASH_DEVICE	DEVICE0 /* extra flash at device 0 */
+#define CFG_EXTRA_FLASH_WIDTH	2	/* 16 bit */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_CFI		1
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size */
+#define CFG_ENV_ADDR		(0xfff80000 - CFG_ENV_SECT_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+
+#define CFG_L2
+
+#ifdef CONFIG_750CX
+#define L2_INIT		0
+#else
+#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#endif
+
+#define L2_ENABLE	(L2_INIT | L2CR_L2E)
+
+/*------------------------------------------------------------------------
+ * Real time clock
+ */
+#define CONFIG_RTC_DS1302
+
+
+/*------------------------------------------------------------------------
+ * Galileo I2C driver
+ */
+#define CONFIG_GT_I2C
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
+
+#endif	/* __CONFIG_H */