diff options
| author | wdenk <wdenk> | 2003-12-07 18:32:37 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-12-07 18:32:37 +0000 |
| commit | a2663ea4fc9d18cb8000c97ed92c3c668eda8e04 (patch) | |
| tree | 9eb328b497d6f482e5571635fa00b1d0cae5b185 /include/configs/VCMA9.h | |
| parent | ef5a9672c778e22ecb522db625b5df78ea40ed23 (diff) | |
| download | u-boot-imx-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.zip u-boot-imx-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.tar.gz u-boot-imx-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.tar.bz2 | |
* Patches by David Müller, 14 Nov 2003:
- board/mpl/common/common_util.c
* implement support for BZIP2 compressed images
* various cleanups (printf -> puts, ...)
- board/mpl/common/flash.c
* report correct errors to upper layers
* check the erase fail and VPP low bits in status reg
- board/mpl/vcma9/cmd_vcma9.c
- board/mpl/vcma9/flash.c
* various cleanups (printf -> puts, ...)
- common/cmd_usb.c
* fix typo in comment
- cpu/arm920t/usb_ohci.c
* support for S3C2410 is missing in #if line
- drivers/cs8900.c
* reinit some registers in case of error (cable missing, ...)
- fs/fat/fat.c
* support for USB/MMC devices is missing in #if line
- include/configs/MIP405.h
- include/configs/PIP405.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
- include/configs/VCMA9.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
* enable USB support
- lib_arm/armlinux.c
* change calling convention of ARM Linux kernel as
described on http://www.arm.linux.org.uk/developer/booting.php
* Patch by Thomas Lange, 14 Nov 2003:
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
support all these AMD boards.
* Patch by Thomas Lange, 14 Nov 2003:
Workaround for mips au1x00 physical memory accesses (the au1x00
uses a 36 bit bus internally and cannot access physical memory
directly. Use the uncached SDRAM address instead of the physical
one.)
Diffstat (limited to 'include/configs/VCMA9.h')
| -rw-r--r-- | include/configs/VCMA9.h | 30 |
1 files changed, 20 insertions, 10 deletions
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 8a09da6..9ca80ab 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -42,6 +42,7 @@ #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ #define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ #define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */ @@ -63,10 +64,13 @@ /*CFG_CMD_NAND |*/ \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ - /*CFG_CMD_USB |*/ \ + CFG_CMD_USB | \ CFG_CMD_REGINFO | \ + CFG_CMD_FAT | \ CFG_CMD_DATE | \ CFG_CMD_ELF | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ CFG_CMD_BSP) /* this must be included after the definiton of CONFIG_COMMANDS */ @@ -96,11 +100,11 @@ /* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +/*#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)*/ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_MONITOR_LEN (256 * 1024) -#define CFG_MALLOC_LEN (128 * 1024) +#define CFG_MALLOC_LEN (1024 * 1024) /* BUNZIP2 needs a lot of RAM */ /* * Hardware drivers @@ -119,14 +123,13 @@ /************************************************************ * USB support ************************************************************/ -#if 0 -#define CONFIG_USB_OHCI -#define CONFIG_USB_KEYBOARD -#define CONFIG_USB_STORAGE +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_KEYBOARD 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 /* Enable needed helper functions */ #define CFG_DEVICE_DEREGISTER /* needs device_deregister */ -#endif /************************************************************ * RTC @@ -139,7 +142,11 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 5 +/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ +#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ + #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 10.0.0.110 #define CONFIG_SERVERIP 10.0.0.1 @@ -176,6 +183,9 @@ /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/* support BZIP2 compression */ +#define CONFIG_BZIP2 1 + /************************************************************ * Ident ************************************************************/ |