rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 97 insertions, 97 deletions

diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 19b3be7..75d1985 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -43,7 +43,7 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_TOTAL5200	1	/* ... on Total5200 board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -55,7 +55,7 @@
  */
 #define CONFIG_PSC_CONSOLE	3	/* console is on PSC3 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Video console
@@ -95,7 +95,7 @@
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
 #else	/* MGT5100 */
@@ -141,7 +141,7 @@
 
 
 #if (TEXT_BASE == 0xFE000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -180,54 +180,54 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #if CONFIG_TOTAL5200_REV==2
-#   define CFG_MAX_FLASH_BANKS	3	/* max num of flash banks */
-#   define CFG_FLASH_BANKS_LIST { CFG_CS5_START, CFG_CS4_START, CFG_BOOTCS_START }
+#   define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max num of flash banks */
+#   define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS5_START, CONFIG_SYS_CS4_START, CONFIG_SYS_BOOTCS_START }
 #else
-#   define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks  */
-#   define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#   define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks  */
+#   define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
 #endif
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
 #if CONFIG_TOTAL5200_REV==1
-#   define CFG_FLASH_BASE	0xFE000000
-#   define CFG_FLASH_SIZE	0x02000000
+#   define CONFIG_SYS_FLASH_BASE	0xFE000000
+#   define CONFIG_SYS_FLASH_SIZE	0x02000000
 #elif CONFIG_TOTAL5200_REV==2
-#   define CFG_FLASH_BASE	0xFA000000
-#   define CFG_FLASH_SIZE	0x06000000
+#   define CONFIG_SYS_FLASH_BASE	0xFA000000
+#   define CONFIG_SYS_FLASH_SIZE	0x06000000
 #endif /* CONFIG_TOTAL5200_REV */
 
-#if defined(CFG_LOWBOOT)
+#if defined(CONFIG_SYS_LOWBOOT)
 #   define CONFIG_ENV_ADDR		0xFE040000
-#else	/* CFG_LOWBOOT */
+#else	/* CONFIG_SYS_LOWBOOT */
 #   define CONFIG_ENV_ADDR		0xFFF40000
-#endif	/* CFG_LOWBOOT */
+#endif	/* CONFIG_SYS_LOWBOOT */
 
 /*
  * Environment settings
@@ -240,29 +240,29 @@
 /*
  * Memory map
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_MBAR		0xF0000000	/*   64 kB */
-#define CFG_FPGA_BASE		0xF0010000	/*   64 kB */
-#define CFG_CPLD_BASE		0xF0020000	/*   64 kB */
-#define CFG_LCD_BASE		0xF1000000	/* 4096 kB */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000	/*   64 kB */
+#define CONFIG_SYS_FPGA_BASE		0xF0010000	/*   64 kB */
+#define CONFIG_SYS_CPLD_BASE		0xF0020000	/*   64 kB */
+#define CONFIG_SYS_LCD_BASE		0xF1000000	/* 4096 kB */
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -293,32 +293,32 @@
  * PSC1:  reset default, changed in AC'97 driver                 000
  *
  */
-#define CFG_GPS_PORT_CONFIG	0x00000C10
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00000C10
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
@@ -326,11 +326,11 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
 #if defined (CONFIG_MGT5100)
@@ -338,43 +338,43 @@
 #endif
 
 #if CONFIG_TOTAL5200_REV==1
-#   define CFG_BOOTCS_START	CFG_FLASH_BASE
-#   define CFG_BOOTCS_SIZE	0x02000000	/* 32 MB */
-#   define CFG_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
-#   define CFG_CS0_START	CFG_FLASH_BASE
-#   define CFG_CS0_SIZE		0x02000000	/* 32 MB */
+#   define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#   define CONFIG_SYS_BOOTCS_SIZE	0x02000000	/* 32 MB */
+#   define CONFIG_SYS_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS0_START	CONFIG_SYS_FLASH_BASE
+#   define CONFIG_SYS_CS0_SIZE		0x02000000	/* 32 MB */
 #else
-#   define CFG_BOOTCS_START	(CFG_CS4_START + CFG_CS4_SIZE)
-#   define CFG_BOOTCS_SIZE	0x02000000	/* 32 MB */
-#   define CFG_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
-#   define CFG_CS4_START	(CFG_CS5_START + CFG_CS5_SIZE)
-#   define CFG_CS4_SIZE		0x02000000	/* 32 MB */
-#   define CFG_CS4_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
-#   define CFG_CS5_START	CFG_FLASH_BASE
-#   define CFG_CS5_SIZE		0x02000000	/* 32 MB */
-#   define CFG_CS5_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_BOOTCS_START	(CONFIG_SYS_CS4_START + CONFIG_SYS_CS4_SIZE)
+#   define CONFIG_SYS_BOOTCS_SIZE	0x02000000	/* 32 MB */
+#   define CONFIG_SYS_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS4_START	(CONFIG_SYS_CS5_START + CONFIG_SYS_CS5_SIZE)
+#   define CONFIG_SYS_CS4_SIZE		0x02000000	/* 32 MB */
+#   define CONFIG_SYS_CS4_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS5_START	CONFIG_SYS_FLASH_BASE
+#   define CONFIG_SYS_CS5_SIZE		0x02000000	/* 32 MB */
+#   define CONFIG_SYS_CS5_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
 #endif
 
-#define CFG_CS1_START		CFG_FPGA_BASE
-#define CFG_CS1_SIZE		0x00010000	/* 64 kB */
-#define CFG_CS1_CFG		0x0019FF00	/* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FPGA_BASE
+#define CONFIG_SYS_CS1_SIZE		0x00010000	/* 64 kB */
+#define CONFIG_SYS_CS1_CFG		0x0019FF00	/* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
 
-#define CFG_CS2_START		CFG_LCD_BASE
-#define CFG_CS2_SIZE		0x00400000	/* 4096 kB */
-#define CFG_CS2_CFG		0x0032FD0C	/* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_LCD_BASE
+#define CONFIG_SYS_CS2_SIZE		0x00400000	/* 4096 kB */
+#define CONFIG_SYS_CS2_CFG		0x0032FD0C	/* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
 
 #if CONFIG_TOTAL5200_REV==1
-#   define CFG_CS3_START	CFG_CPLD_BASE
-#   define CFG_CS3_SIZE		0x00010000	/* 64 kB */
-#   define CFG_CS3_CFG		0x000ADF00	/* 10WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS3_START	CONFIG_SYS_CPLD_BASE
+#   define CONFIG_SYS_CS3_SIZE		0x00010000	/* 64 kB */
+#   define CONFIG_SYS_CS3_CFG		0x000ADF00	/* 10WS, MX, AL, CE, AS_25, DS_32 */
 #else
-#   define CFG_CS3_START	CFG_CPLD_BASE
-#   define CFG_CS3_SIZE		0x00010000	/* 64 kB */
-#   define CFG_CS3_CFG		0x000AD800	/* 10WS, MX, AL, CE, AS_24, DS_8 */
+#   define CONFIG_SYS_CS3_START	CONFIG_SYS_CPLD_BASE
+#   define CONFIG_SYS_CS3_SIZE		0x00010000	/* 64 kB */
+#   define CONFIG_SYS_CS3_CFG		0x000AD800	/* 10WS, MX, AL, CE, AS_24, DS_8 */
 #endif
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -396,23 +396,23 @@
 #define	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #endif /* __CONFIG_H */