summaryrefslogtreecommitdiff
path: root/include/configs/TQM5200.h
diff options
context:
space:
mode:
authorWolfgang Denk <wd@fifi.denx.de>2006-06-16 16:11:34 +0200
committerWolfgang Denk <wd@fifi.denx.de>2006-06-16 16:11:34 +0200
commitcd65a3dc872407e6278062246a4eb5e10f180d7e (patch)
treeb4e0f34b2ee25ca3f61591ee6206a0430fc5eb16 /include/configs/TQM5200.h
parent4bdb53cafb5cdfb13c3a1fc7a133ca36d1d5e00d (diff)
downloadu-boot-imx-cd65a3dc872407e6278062246a4eb5e10f180d7e.zip
u-boot-imx-cd65a3dc872407e6278062246a4eb5e10f180d7e.tar.gz
u-boot-imx-cd65a3dc872407e6278062246a4eb5e10f180d7e.tar.bz2
Adjust TQM5200 make targets
Make the automatic CS configuration the default. The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB and CONFIG_TQM5200_AC are removed. "TQM5200_config" is now the default for STK52XX.200 base boards. On a STK52XX.100 base board "TQM5200_STK100_config" must be used. Patch by Martin Krause, 07 Nov 2005
Diffstat (limited to 'include/configs/TQM5200.h')
-rw-r--r--include/configs/TQM5200.h31
1 files changed, 4 insertions, 27 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6020998..6b8759f 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,6 @@
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -83,7 +82,7 @@
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
-#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */
@@ -192,16 +191,6 @@
#undef CONFIG_BOOTARGS
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX "-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX "-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX "-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX "\0"
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
@@ -218,7 +207,7 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
"load=tftp 200000 ${u-boot}\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
@@ -284,13 +273,6 @@
#endif
/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
- CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST { CFG_I2C_SLAVE }
-#endif
-
#if defined (CONFIG_MINIFAP)
#undef I2C_ADDR_LIST
#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
@@ -493,13 +475,9 @@
* SRAM - Do not map below 2 GB in address space, because this area is used
* for SDRAM autosizing.
*/
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
#define CFG_CS2_START 0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
-#else /* CONFIG_CS_AUTOCONF */
#define CFG_CS2_SIZE 0x100000 /* 1 MByte */
-#endif
#define CFG_CS2_CFG 0x0004D930
#endif
@@ -507,8 +485,7 @@
* Grafic controller - Do not map below 2 GB in address space, because this
* area is used for SDRAM autosizing.
*/
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
- defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
#define SM501_FB_BASE 0xE0000000
#define CFG_CS1_START (SM501_FB_BASE)
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */