rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 91 insertions, 91 deletions

diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index d27a54e..18ffbfd 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -46,9 +46,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef  CONFIG_WATCHDOG
 
@@ -78,51 +78,51 @@
 
 #define CONFIG_BOOTDELAY	3
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 
-#define CFG_LOAD_ADDR	        0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	        0x200000	/* default load address */
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 /*
  * Clock configuration: enable only one of the following options
  */
 
 #if 0 /* this setting will run the cpu at 11MHz */
-#define CFG_PLL_BYPASS          1                /* bypass PLL for test purpose */
-#undef  CFG_FAST_CLK                             /* MCF5249 can run at 140MHz   */
-#define CFG_CLK		        11289600         /* PLL bypass                  */
+#define CONFIG_SYS_PLL_BYPASS          1                /* bypass PLL for test purpose */
+#undef  CONFIG_SYS_FAST_CLK                             /* MCF5249 can run at 140MHz   */
+#define CONFIG_SYS_CLK		        11289600         /* PLL bypass                  */
 #endif
 
 #if 0 /* this setting will run the cpu at 70MHz */
-#undef  CFG_PLL_BYPASS                           /* bypass PLL for test purpose */
-#undef  CFG_FAST_CLK                             /* MCF5249 can run at 140MHz   */
-#define CFG_CLK		        72185018         /* The next lower speed        */
+#undef  CONFIG_SYS_PLL_BYPASS                           /* bypass PLL for test purpose */
+#undef  CONFIG_SYS_FAST_CLK                             /* MCF5249 can run at 140MHz   */
+#define CONFIG_SYS_CLK		        72185018         /* The next lower speed        */
 #endif
 
 #if 1 /* this setting will run the cpu at 140MHz */
-#undef  CFG_PLL_BYPASS                           /* bypass PLL for test purpose */
-#define CFG_FAST_CLK            1                /* MCF5249 can run at 140MHz   */
-#define	CFG_CLK		        132025600        /* MCF5249 can run at 140MHz   */
+#undef  CONFIG_SYS_PLL_BYPASS                           /* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK            1                /* MCF5249 can run at 140MHz   */
+#define	CONFIG_SYS_CLK		        132025600        /* MCF5249 can run at 140MHz   */
 #endif
 
 /*
@@ -131,34 +131,34 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define	CFG_MBAR2	        0x80000000
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define	CONFIG_SYS_MBAR2	        0x80000000
 
 /*-----------------------------------------------------------------------
  * I2C
  */
 #define	CONFIG_SOFT_I2C
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
-#define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 #if defined (CONFIG_SOFT_I2C)
 #if 0 /* push-pull */
 #define	SDA	        0x00800000
 #define	SCL	        0x00000008
-#define DIR0            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_EN))
-#define DIR1            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_EN))
-#define OUT0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_OUT))
-#define OUT1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_OUT))
-#define IN0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_READ))
-#define IN1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_READ))
+#define DIR0            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
+#define DIR1            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
+#define OUT0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
+#define OUT1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
+#define IN0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
+#define IN1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
 #define	I2C_INIT	{OUT1|=SDA;OUT0|=SCL;}
 #define	I2C_READ	((IN1&SDA)?1:0)
 #define	I2C_SDA(x)	{if(x)OUT1|=SDA;else OUT1&=~SDA;}
@@ -169,12 +169,12 @@
 #else /* open-collector */
 #define	SDA	        0x00800000
 #define	SCL	        0x00000008
-#define DIR0            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_EN))
-#define DIR1            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_EN))
-#define OUT0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_OUT))
-#define OUT1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_OUT))
-#define IN0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_READ))
-#define IN1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_READ))
+#define DIR0            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
+#define DIR1            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
+#define OUT0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
+#define OUT1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
+#define IN0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
+#define IN1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
 #define	I2C_INIT	{DIR1&=~SDA;DIR0&=~SCL;OUT1&=~SDA;OUT0&=~SCL;}
 #define	I2C_READ	((IN1&SDA)?1:0)
 #define	I2C_SDA(x)	{if(x)DIR1&=~SDA;else DIR1|=SDA;}
@@ -188,11 +188,11 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		0xFFC40000	/* Address of Environment Sector*/
@@ -202,94 +202,94 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffc00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		0xffc00000
 
 #if 0 /* test-only */
 #define CONFIG_PRAM             512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
 #endif
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CFG_CSAR0               0xffc0
-#define	CFG_CSCR0               0x1980          /* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CSAR0               0xffc0
+#define	CONFIG_SYS_CSCR0               0x1980          /* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CFG_CSMR0               0x003f0021      /* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CSMR0               0x003f0021      /* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CFG_CSAR1               0xe000
-#define	CFG_CSCR1               0x0d80          /* WS=0011, AA=1, PS=10         */
-#define	CFG_CSMR1               0x00010001      /* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CSAR1               0xe000
+#define	CONFIG_SYS_CSCR1               0x0d80          /* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CSMR1               0x00010001      /* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define	CFG_GPIO_FUNC           0x00000008      /* Set gpio pins: none          */
-#define	CFG_GPIO1_FUNC          0x00df00f0      /* 36-39(SWITCH),48-52(FPGAs),54*/
-#define	CFG_GPIO_EN             0x00000008      /* Set gpio output enable       */
-#define	CFG_GPIO1_EN            0x00c70000      /* Set gpio output enable       */
-#define	CFG_GPIO_OUT            0x00000008      /* Set outputs to default state */
-#define	CFG_GPIO1_OUT           0x00c70000      /* Set outputs to default state */
+#define	CONFIG_SYS_GPIO_FUNC           0x00000008      /* Set gpio pins: none          */
+#define	CONFIG_SYS_GPIO1_FUNC          0x00df00f0      /* 36-39(SWITCH),48-52(FPGAs),54*/
+#define	CONFIG_SYS_GPIO_EN             0x00000008      /* Set gpio output enable       */
+#define	CONFIG_SYS_GPIO1_EN            0x00c70000      /* Set gpio output enable       */
+#define	CONFIG_SYS_GPIO_OUT            0x00000008      /* Set outputs to default state */
+#define	CONFIG_SYS_GPIO1_OUT           0x00c70000      /* Set outputs to default state */
 
-#define CFG_GPIO1_LED           0x00400000      /* user led                     */
+#define CONFIG_SYS_GPIO1_LED           0x00400000      /* user led                     */
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	512*1024    /* 512kByte is enough for XC2S200*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	512*1024    /* 512kByte is enough for XC2S200*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x00010000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x00040000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x00020000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00080000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00100000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x00010000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x00040000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x00020000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00080000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00100000  /* FPGA done pin (ppc input)     */
 
 #endif	/* _TASREG_H */