rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 74 insertions, 74 deletions

diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 0cc4fe4..7fc455b 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -94,7 +94,7 @@
 # define STATUS_LED_DAT		im_ioport.iop_padat
 
 # define STATUS_LED_BIT		0x8000		/* LED 0 is on PA.0 */
-# define STATUS_LED_PERIOD	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+# define STATUS_LED_PERIOD	((CONFIG_SYS_HZ / 2) / 5)	/* blink at 5 Hz */
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -136,15 +136,15 @@
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
-# define CFG_I2C_EEPROM_ADDR	0x50	/* Atmel 24C64			*/
-# define CFG_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Atmel 24C64			*/
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
 
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define	CONFIG_MII		1
 
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 
 
 /*
@@ -167,7 +167,7 @@
 #define CONFIG_CMD_DATE
 
 
-#define CFG_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 
 /*
  * JFFS2 partitions
@@ -197,7 +197,7 @@
 /* NAND flash support */
 #define CONFIG_NAND_LEGACY
 #define CONFIG_MTD_NAND_ECC_JFFS2
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
@@ -210,7 +210,7 @@
 
 /* DFBUSY is available on Port C, bit 12; 0 if busy */
 #define NAND_WAIT_READY(nand)	\
-	while (!(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x0008));
+	while (!(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x0008));
 #define WRITE_NAND_COMMAND(d, adr) WRITE_NAND((d), (adr))
 #define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND((d), (adr))
 #define WRITE_NAND(d, adr)	\
@@ -236,25 +236,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save a little memory */
-#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save a little memory */
+#define	CONFIG_SYS_PROMPT		"=>"	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -264,65 +264,65 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define	CFG_SRAM_BASE		0xF4000000
-#define	CFG_SRAM_SIZE		0x04000000	/* autosize up to 64Mbyte */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SRAM_BASE		0xF4000000
+#define	CONFIG_SYS_SRAM_SIZE		0x04000000	/* autosize up to 64Mbyte */
 
-#define CFG_FLASH_BASE		0xF8000000
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define CONFIG_SYS_FLASH_BASE		0xF8000000
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 
-#define CFG_DFLASH_BASE		0xff020000 /* DiskOnChip or NAND FLASH */
-#define CFG_DFLASH_SIZE		0x00010000
+#define CONFIG_SYS_DFLASH_BASE		0xff020000 /* DiskOnChip or NAND FLASH */
+#define CONFIG_SYS_DFLASH_SIZE		0x00010000
 
-#define CFG_FPGA_BASE		0xFF100000	/* Xilinx FPGA */
-#define CFG_FPGA_PROG		0xFF130000	/* Programming address */
-#define CFG_FPGA_SIZE		0x00040000	/* 256KiB usable */
+#define CONFIG_SYS_FPGA_BASE		0xFF100000	/* Xilinx FPGA */
+#define CONFIG_SYS_FPGA_PROG		0xFF130000	/* Programming address */
+#define CONFIG_SYS_FPGA_SIZE		0x00040000	/* 256KiB usable */
 
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 /* Intel 28F640 has 135, 127 64K sectors in 8MB, + 8 more for 8K boot blocks.
  * AMD 29LV641 has 128 64K sectors in 8MB
  */
-#define CFG_MAX_FLASH_SECT	135	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -332,10 +332,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -343,28 +343,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -374,14 +374,14 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+#define CONFIG_SYS_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
 
  /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
  * entire address space, we have to set the memory controller
@@ -398,47 +398,47 @@
  * BR0 and OR0 (FLASH)
  */
 
-#define CFG_PRELIM_OR0_AM	0xFC000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR0_AM	0xFC000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR0_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR0_AM | CONFIG_SYS_OR_TIMING_FLASH)
 
 #define CONFIG_FLASH_16BIT
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )
-#define CFG_FLASH_PROTECTION	/* need to lock/unlock sectors in hardware */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_FLASH_PROTECTION	/* need to lock/unlock sectors in hardware */
 
 /**********************************************************
  * BR1 and OR1 (FPGA)
  * These preliminary values are also the final values.
  */
-#define CFG_OR_TIMING_FPGA \
+#define CONFIG_SYS_OR_TIMING_FPGA \
 	(OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_4_CLK | OR_EHTR | OR_TRLX)
-#define CFG_BR1_PRELIM	((CFG_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CFG_OR1_PRELIM	(((-CFG_FPGA_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_FPGA)
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(((-CONFIG_SYS_FPGA_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_FPGA)
 
 /**********************************************************
  * BR4 and OR4 (data flash)
  * These preliminary values are also the final values.
  */
-#define CFG_OR_TIMING_DFLASH \
+#define CONFIG_SYS_OR_TIMING_DFLASH \
 	(OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK | OR_EHTR | OR_TRLX)
-#define CFG_BR4_PRELIM	((CFG_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CFG_OR4_PRELIM	(((-CFG_DFLASH_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_DFLASH)
+#define CONFIG_SYS_BR4_PRELIM	((CONFIG_SYS_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR4_PRELIM	(((-CONFIG_SYS_DFLASH_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_DFLASH)
 
 /**********************************************************
  * BR5/6 and OR5/6 (Dual UART)
  */
-#define CFG_DUART_SIZE	0x8000	/* 32K window, only uses 8 bytes */
-#define CFG_DUARTA_BASE	0xff010000
-#define CFG_DUARTB_BASE	0xff018000
+#define CONFIG_SYS_DUART_SIZE	0x8000	/* 32K window, only uses 8 bytes */
+#define CONFIG_SYS_DUARTA_BASE	0xff010000
+#define CONFIG_SYS_DUARTB_BASE	0xff018000
 
 #define DUART_MBMR	0
-#define DUART_OR_VALUE (ORMASK(CFG_DUART_SIZE) | OR_G5LS| OR_BI)
+#define DUART_OR_VALUE (ORMASK(CONFIG_SYS_DUART_SIZE) | OR_G5LS| OR_BI)
 #define DUART_BR_VALUE (BR_MS_UPMB | BR_PS_8 | BR_V)
-#define DUART_BR5_VALUE ((CFG_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
-#define DUART_BR6_VALUE ((CFG_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
+#define DUART_BR5_VALUE ((CONFIG_SYS_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
+#define DUART_BR6_VALUE ((CONFIG_SYS_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
 
 /**********************************************************
  *