diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-06-20 13:54:51 +0900 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-07-07 19:43:01 -0400 |
commit | dab0f7626edd5469f6949b826e52f74fcb48b090 (patch) | |
tree | 2e7b7d66fc822f059418635aef21c733c8a3a80b /include/configs/QS850.h | |
parent | 49f9337956af6d52470c8082c8e7088b0c030334 (diff) | |
download | u-boot-imx-dab0f7626edd5469f6949b826e52f74fcb48b090.zip u-boot-imx-dab0f7626edd5469f6949b826e52f74fcb48b090.tar.gz u-boot-imx-dab0f7626edd5469f6949b826e52f74fcb48b090.tar.bz2 |
mpc8xx: remove qs850, qs860t board support
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'include/configs/QS850.h')
-rw-r--r-- | include/configs/QS850.h | 551 |
1 files changed, 0 insertions, 551 deletions
diff --git a/include/configs/QS850.h b/include/configs/QS850.h deleted file mode 100644 index f114213..0000000 --- a/include/configs/QS850.h +++ /dev/null @@ -1,551 +0,0 @@ -/* - * (C) Copyright 2003 - * MuLogic B.V. - * - * (C) Copyright 2002 - * Simple Network Magic Corporation - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* various debug settings */ -#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */ -#undef CONFIG_SILENT_CONSOLE /* silent console */ -#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG_FLASH /* debug flash code */ -#undef FLASH_DEBUG /* debug fash code */ -#undef DEBUG_ENV /* debug environment code */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */ -#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_QS850 1 /* ...on a QS850 module */ -#define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* Select the target clock speed */ -#undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */ -#undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */ -#undef CONFIG_CLOCK_50MHZ /* cpu=49,971,200 Hz, mem=33Mhz */ -#define CONFIG_CLOCK_66MHZ 1 /* cpu=67,108,864 Hz, mem=66Mhz */ -#undef CONFIG_CLOCK_80MHZ /* cpu=79,986,688 Hz, mem=33Mhz */ - -#ifdef CONFIG_CLOCK_16MHZ -#define CONFIG_CLOCK_MULT 512 -#endif - -#ifdef CONFIG_CLOCK_33MHZ -#define CONFIG_CLOCK_MULT 1024 -#endif - -#ifdef CONFIG_CLOCK_50MHZ -#define CONFIG_CLOCK_MULT 1525 -#endif - -#ifdef CONFIG_CLOCK_66MHZ -#define CONFIG_CLOCK_MULT 2048 -#endif - -#ifdef CONFIG_CLOCK_80MHZ -#define CONFIG_CLOCK_MULT 2441 -#endif - -/* choose flash size, 4Mb or 8Mb */ -#define CONFIG_FLASH_4MB 1 /* board has 4Mb flash */ -#undef CONFIG_FLASH_8MB /* board has 8Mb flash */ - -#define CONFIG_CLOCK_BASE 32768 /* Base clock input freq */ - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ - -/* Define default IP addresses */ -#define CONFIG_IPADDR 192.168.1.99 /* own ip address */ -#define CONFIG_SERVERIP 192.168.1.19 /* used for tftp (not nfs?) */ - -/* message to say directly after booting */ -#define CONFIG_PREBOOT "echo '';" \ - "echo 'type:';" \ - "echo 'run boot_nfs to boot to NFS';" \ - "echo 'run boot_flash to boot to flash';" \ - "echo '';" \ - "echo 'run flash_rootfs to install a new rootfs';" \ - "echo 'run flash_env to clear the env sector';" \ - "echo 'run flash_rw to clear the rw fs';" \ - "echo 'run flash_uboot to install a new u-boot';" \ - "echo 'run flash_kernel to install a new kernel';" - -/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */ -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND "run boot_nfs" - -#undef CONFIG_BOOTARGS /* made by set_nfs of set_flash */ - -/* Our flash filesystem looks like this - * - * 4Mb board: - * ffc0 0000 - ffeb ffff root filesystem (jffs2) (~3Mb) - * ffec 0000 - ffed ffff read-write filesystem (ext2) - * ffee 0000 - ffef ffff environment - * fff0 0000 - fff1 ffff u-boot - * fff2 0000 - ffff ffff linux kernel - * - * 8Mb board: - * ff80 0000 - ffeb ffff root filesystem (jffs2) (~7Mb) - * ffec 0000 - ffed ffff read-write filesystem (ext2) - * ffee 0000 - ffef ffff environment - * fff0 0000 - fff1 ffff u-boot - * fff2 0000 - ffff ffff linux kernel - * - */ - -/* environment for 4Mb board */ -#ifdef CONFIG_FLASH_4MB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=QS850\0" \ - "hostname=qs850\0" \ - "netdev=eth0\0" \ - "ethaddr=00:01:02:B4:36:56\0" \ - "rootpath=/exports/rootfs\0" \ - "mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \ - /* fill in variables */ \ - "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \ - "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \ - "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \ - /* commands */ \ - "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \ - "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \ - /* reinstall flash parts */ \ - "flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \ - "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \ - "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \ - "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \ - "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0" -#endif /* CONFIG_FLASH_4MB */ - -/* environment for 8Mb board */ -#ifdef CONFIG_FLASH_8MB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=QS850\0" \ - "hostname=qs850\0" \ - "netdev=eth0\0" \ - "ethaddr=00:01:02:B4:36:56\0" \ - "rootpath=/exports/rootfs\0" \ - "mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \ - /* fill in variables */ \ - "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \ - "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \ - "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \ - /* commands */ \ - "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \ - "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \ - /* reinstall flash parts */ \ - "flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \ - "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \ - "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \ - "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \ - "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0" -#endif /* CONFIG_FLASH_8MB */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_STATUS_LED /* Status LED disabled */ -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN - - -/*----------------------------------------------------------------------- - * Environment variable storage is in FLASH, one sector before U-boot - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128Kb, one whole sector */ -#define CONFIG_ENV_SIZE 0x2000 /* 8kb */ -#define CONFIG_ENV_ADDR 0xffee0000 /* address of env sector */ - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/*----------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* Allow an 8Mbyte window */ - -#define FLASH_BASE0_4M_PRELIM 0xFFC00000 /* Base for 4M Flash */ -#define FLASH_BASE0_8M_PRELIM 0xFF800000 /* Base for 8M Flash */ - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 /* U-boot location */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * TODO flash parameters - * FLASH organization for Intel Strataflash - */ -#undef CONFIG_SYS_FLASH_16BIT /* 32-bit wide flash memory */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ - -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - */ - -/* MF (Multiplication Factor of SPLL) */ -/* Sets the QS850 to specified clock from 32KHz clock at EXTAL. */ -#define vPLPRCR_MF ((CONFIG_CLOCK_MULT+1) << 20) -#define CONFIG_SYS_PLPRCR (vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - */ -#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00) -#define CONFIG_SYS_BRGCLK_PRESCALE 1 -#endif - -#if defined(CONFIG_CLOCK_66MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01) -#define CONFIG_SYS_BRGCLK_PRESCALE 4 -#endif - -#if defined(CONFIG_CLOCK_80MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01) -#define CONFIG_SYS_BRGCLK_PRESCALE 4 -#endif - -#define SCCR_MASK CONFIG_SYS_SCCR - -/*----------------------------------------------------------------------- - * Debug Enable Register - * 0x73E67C0F - All interrupts handled by BDM - * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM - *----------------------------------------------------------------------- -#define CONFIG_SYS_DER 0x73E67C0F -#define CONFIG_SYS_DER 0x0082400F - - #------------------------------------------------------------------------- - # Program the Debug Enable Register (DER). This register provides the user - # with the reason for entering into the debug mode. We want all conditions - # to end up as an exception. We don't want to enter into debug mode for - # any condition. See the back of of the Development Support section of the - # MPC860 User Manual for a description of this register. - #------------------------------------------------------------------------- -*/ -#define CONFIG_SYS_DER 0 - -/*----------------------------------------------------------------------- - * Memory Controller Initialization Constants - *----------------------------------------------------------------------- - */ - -/* - * BR0 and OR0 (AMD dual FLASH devices) - * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation) - */ -#define CONFIG_SYS_PRELIM_OR_AM -#define CONFIG_SYS_OR_TIMING_FLASH - -/* - *----------------------------------------------------------------------- - * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32) - * flash that resides on the QS850. - *----------------------------------------------------------------------- - */ - -/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */ -/* represents a minumum 32K block size. */ -#define vBR0_BA ((0xFF80 << 16) + (0 << 15)) -#define CONFIG_SYS_BR0_PRELIM (vBR0_BA | BR_V) - -/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits */ -/* which defines a 8 Mbyte memory block. */ -#define vOR0_AM ((0xFF80 << 16) + (0 << 15)) - -#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ) -/* 0101 = Add a 5 clock cycle wait state */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK) -#endif - -#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ) -/* 0011 = Add a 3 clock cycle wait state */ -/* 29.8ns clock * (3 + 2) = 149ns cycle time */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK) -#endif - -#if defined(CONFIG_CLOCK_16MHZ) -/* 0010 = Add a 2 clock cycle wait state */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK) -#endif - -/* - * BR1 and OR1 (SDRAM) - * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation) - * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation) - * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation) - * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation) - */ - -#define SDRAM_BASE 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ - -/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which - * represents a 128 Mbyte block the DRAM in - * this address base. - */ -#define vOR1_AM ((0xF800 << 16) + (0 << 15)) -#define vBR1_BA ((0x0000 << 16) + (0 << 15)) -#define CONFIG_SYS_OR1 (vOR1_AM | OR_CSNT_SAM | OR_BI) -#define CONFIG_SYS_BR1 (vBR1_BA | BR_MS_UPMA | BR_V) - -/* Machine A Mode Register */ - -/* PTA Periodic Timer A */ - -#if defined(CONFIG_CLOCK_80MHZ) -#define vMAMR_PTA (19 << 24) -#endif - -#if defined(CONFIG_CLOCK_66MHZ) -#define vMAMR_PTA (16 << 24) -#endif - -#if defined(CONFIG_CLOCK_50MHZ) -#define vMAMR_PTA (195 << 24) -#endif - -#if defined(CONFIG_CLOCK_33MHZ) -#define vMAMR_PTA (131 << 24) -#endif - -#if defined(CONFIG_CLOCK_16MHZ) -#define vMAMR_PTA (65 << 24) -#endif - -/* For boards with 16M of SDRAM */ -#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */ -#define CONFIG_SYS_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\ -MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* For boards with 32M of SDRAM */ -#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */ -#define CONFIG_SYS_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\ -MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - - -/* Memory Periodic Timer Prescaler Register */ - -#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ) -/* Divide by 32 */ -#define CONFIG_SYS_MPTPR 0x02 -#endif - -#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ) -/* Divide by 16 */ -#define CONFIG_SYS_MPTPR 0x04 -#endif - -/* - * BR2 and OR2 (Unused) - * Base address = 0xF020_0000 - 0xF020_0FFF - * - */ -#define CONFIG_SYS_OR2_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR2_PRELIM 0xF0200000 - -/* - * BR3 and OR3 (External Bus CS3) - * Base address = 0xF030_0000 - 0xF030_0FFF - * - */ -#define CONFIG_SYS_OR3_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR3_PRELIM 0xF0300000 - -/* - * BR4 and OR4 (External Bus CS3) - * Base address = 0xF040_0000 - 0xF040_0FFF - * - */ -#define CONFIG_SYS_OR4_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR4_PRELIM 0xF0400000 - - -/* - * BR4 and OR4 (External Bus CS3) - * Base address = 0xF050_0000 - 0xF050_0FFF - * - */ -#define CONFIG_SYS_OR5_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR5_PRELIM 0xF0500000 - -/* - * BR6 and OR6 (Unused) - * Base address = 0xF060_0000 - 0xF060_0FFF - * - */ -#define CONFIG_SYS_OR6_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR6_PRELIM 0xF0600000 - -/* - * BR7 and OR7 (Unused) - * Base address = 0xF070_0000 - 0xF070_0FFF - * - */ -#define CONFIG_SYS_OR7_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR7_PRELIM 0xF0700000 - -/* - * Sanity checks - */ -#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) -#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured -#endif - -#endif /* __CONFIG_H */ |