powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target

Get rid of the SRIOBOOT_MASTER build target, and to support for serving as
a SRIO boot master via environment variable. Set the environment variable
"bootmaster" to "SRIO1" or "SRIO2" using the following command:

		setenv bootmaster SRIO1
		saveenv

The "bootmaster" will enable the function of the SRIO boot master, and
this has the following advantages compared with SRIOBOOT_MASTER build
configuration:
	1. Reduce a build configuration item in boards.cfg file.
	   No longer need to build a special image for master, just use a
	   normal target image and set the "bootmaster" variable.
	2. No longer need to rebuild an image when change the SRIO port for
	   boot from SRIO, just set the corresponding value to "bootmaster"
	   based on the using SRIO port.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

1 files changed, 57 insertions, 2 deletions

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 1c0eb74..46a5e4c 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -36,6 +36,15 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
 #endif
 
+#ifdef CONFIG_SRIOBOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
 #define CONFIG_E500			/* BOOKE e500 family */
@@ -73,7 +82,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH
-#ifndef CONFIG_RAMBOOT_PBL
+#if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIOBOOT_SLAVE)
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 #else
@@ -104,8 +113,12 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET		(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR		0xffe20000
+#define CONFIG_ENV_SIZE		0x2000
 #elif defined(CONFIG_ENV_IS_NOWHERE)
-	#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SIZE		0x2000
 #else
 	#define CONFIG_ENV_IS_IN_FLASH
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE \
@@ -374,6 +387,38 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_SRIO2_MEM_SIZE	0x10000000	/* 256M */
 
 /*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000	/* 512K */
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE 0x40000	/* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIOBOOT - SLAVE
+ */
+#ifdef CONFIG_SRIOBOOT_SLAVE
+/* slave port for srioboot */
+#define CONFIG_SRIOBOOT_SLAVE_PORT0
+/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
+#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR)
+#endif
+
+/*
  * eSPI - Enhanced SPI
  */
 #define CONFIG_FSL_ESPI
@@ -485,6 +530,16 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO outbound window->master inbound window->master LAW->
+ * the ucode address in master's NOR flash.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000