Remove legacy NAND and disk on chip references from boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 0 insertions, 99 deletions

diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 724e807..dda6179 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -616,105 +616,6 @@
 #define ER_BASE		0xF1020000
 #define DUMMY_BASE	0xF1FF0000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE			NAND_BASE
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-/* #define NAND_NO_RB */
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 5)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 3)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 4)); \
-	} while(0)
-
-#ifndef NAND_NO_RB
-#define NAND_WAIT_READY(nand) \
-	do { \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
-			WATCHDOG_RESET(); \
-		} \
-	} while (0)
-#else
-#define NAND_WAIT_READY(nand) udelay(12)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
-#define CONFIG_JFFS2_NAND	1			/* jffs2 on nand support */
-#define NAND_CACHE_PAGES	16			/* size of nand cache in 512 bytes pages */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nand0"
-#define CONFIG_JFFS2_PART_SIZE		0x00100000
-#define CONFIG_JFFS2_PART_OFFSET	0x00200000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nand0=netta-nand"
-#define MTDPARTS_DEFAULT	"mtdparts=netta-nand:1m@2m(jffs2)"
-*/
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP