powerpc/mpc86xx: Disable translation for BAT setup

We really shouldn't be overwriting bat registers with translation enabled,
especially when we're executing code using one of them for translating
the current instruction stream.  Instead, disable address translation
while doing the final BAT setup.

In order to do this, setup_bats has to move back to asm code, because we
require translation to be enabled to have a stack for C code.  The yucky
thing about that is that the assembler doesn't like ULL so we have to
switch to using HIGH/LOW pairs for physical addresses that are > 32 bits
in length.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 73 insertions, 50 deletions

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 84d95bb..93b360a 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -99,9 +99,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * when 36-bit is enabled.  When 36-bit is not enabled, these bits are 0.
  */
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f00000000ULL
+#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f
 #else
-#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0
+#define CONFIG_SYS_PHYS_ADDR_HIGH 0x00000000
 #endif
 
 /*
@@ -114,14 +114,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /* Physical addresses */
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0xf
-#define CONFIG_SYS_CCSRBAR_PHYS		(CONFIG_SYS_CCSRBAR_PHYS_LOW \
-					 | ((u64)CONFIG_SYS_CCSRBAR_PHYS_HIGH << 32))
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
-#define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
-#endif
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	CONFIG_SYS_PHYS_ADDR_HIGH
+#define CONFIG_SYS_CCSRBAR_PHYS \
+	PAIRED_PHYS_TO_PHYS(CONFIG_SYS_CCSRBAR_PHYS_LOW, \
+			    CONFIG_SYS_CCSRBAR_PHYS_HIGH)
 
 #define CONFIG_HWCONFIG	/* use hwconfig to control memory interleaving */
 
@@ -181,8 +177,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 
 #define CONFIG_SYS_FLASH_BASE		0xef800000     /* start of FLASH 8M */
-#define CONFIG_SYS_FLASH_BASE_PHYS	(CONFIG_SYS_FLASH_BASE \
-					 | CONFIG_SYS_PHYS_ADDR_HIGH)
+#define CONFIG_SYS_FLASH_BASE_PHYS_LOW	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE_PHYS \
+	PAIRED_PHYS_TO_PHYS(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \
+			    CONFIG_SYS_PHYS_ADDR_HIGH)
 
 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
 
@@ -204,12 +202,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * required for the smallest BAT mapping, so there's a 64k hole.
  */
 #define CONFIG_SYS_LBC_BASE		0xffde0000
-#define CONFIG_SYS_LBC_BASE_PHYS	(CONFIG_SYS_LBC_BASE \
-					 | CONFIG_SYS_PHYS_ADDR_HIGH)
+#define CONFIG_SYS_LBC_BASE_PHYS_LOW	CONFIG_SYS_LBC_BASE
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE		(CONFIG_SYS_LBC_BASE + 0x00010000)
-#define PIXIS_BASE_PHYS 	(CONFIG_SYS_LBC_BASE_PHYS + 0x00010000)
+#define PIXIS_BASE_PHYS_LOW	(CONFIG_SYS_LBC_BASE_PHYS_LOW + 0x00010000)
+#define PIXIS_BASE_PHYS		PAIRED_PHYS_TO_PHYS(PIXIS_BASE_PHYS_LOW, \
+						    CONFIG_SYS_PHYS_ADDR_HIGH)
 #define PIXIS_SIZE		0x00008000	/* 32k */
 #define PIXIS_ID		0x0	/* Board ID at offset 0 */
 #define PIXIS_VER		0x1	/* Board version at offset 1 */
@@ -315,10 +314,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_SRIO1_MEM_BASE	0x80000000	/* base address */
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_SRIO1_MEM_PHYS  0x0000000c00000000ULL
+#define CONFIG_SYS_SRIO1_MEM_PHYS_LOW	0x00000000
+#define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH  0x0000000c
 #else
-#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BASE
+#define CONFIG_SYS_SRIO1_MEM_PHYS_LOW	CONFIG_SYS_SRIO1_MEM_BASE
+#define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH  0x00000000
 #endif
+#define CONFIG_SYS_SRIO1_MEM_PHYS \
+	PAIRED_PHYS_TO_PHYS(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \
+			    CONFIG_SYS_SRIO1_MEM_PHYS_HIGH)
 #define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 128M */
 
 /*
@@ -330,16 +334,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x0000000c00000000ULL
+#define CONFIG_SYS_PCIE1_MEM_PHYS_LOW	0x00000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH	0x0000000c
 #else
 #define CONFIG_SYS_PCIE1_MEM_BUS	CONFIG_SYS_PCIE1_MEM_VIRT
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_VIRT
+#define CONFIG_SYS_PCIE1_MEM_PHYS_LOW	CONFIG_SYS_PCIE1_MEM_VIRT
+#define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH	0x00000000
 #endif
+#define CONFIG_SYS_PCIE1_MEM_PHYS \
+	PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \
+			    CONFIG_SYS_PCIE1_MEM_PHYS_HIGH)
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_PHYS	(CONFIG_SYS_PCIE1_IO_VIRT \
-				 | CONFIG_SYS_PHYS_ADDR_HIGH)
+#define CONFIG_SYS_PCIE1_IO_PHYS_LOW	CONFIG_SYS_PCIE1_IO_VIRT
+#define CONFIG_SYS_PCIE1_IO_PHYS \
+	PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \
+			    CONFIG_SYS_PHYS_ADDR_HIGH)
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64K */
 
 #ifdef CONFIG_PHYS_64BIT
@@ -355,12 +366,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_PCIE2_MEM_VIRT 	(CONFIG_SYS_PCIE1_MEM_VIRT \
 					 + CONFIG_SYS_PCIE1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_PHYS_LOW	(CONFIG_SYS_PCIE1_MEM_PHYS_LOW \
+					 + CONFIG_SYS_PCIE1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_PHYS_HIGH	CONFIG_SYS_PCIE1_MEM_PHYS_HIGH
 #define CONFIG_SYS_PCIE2_MEM_PHYS	(CONFIG_SYS_PCIE1_MEM_PHYS \
 					 + CONFIG_SYS_PCIE1_MEM_SIZE)
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
 #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE2_IO_VIRT 	(CONFIG_SYS_PCIE1_IO_VIRT \
 					 + CONFIG_SYS_PCIE1_IO_SIZE)
+#define CONFIG_SYS_PCIE2_IO_PHYS_LOW	(CONFIG_SYS_PCIE1_IO_PHYS_LOW \
+					 + CONFIG_SYS_PCIE1_IO_SIZE)
 #define CONFIG_SYS_PCIE2_IO_PHYS	(CONFIG_SYS_PCIE1_IO_PHYS \
 					 + CONFIG_SYS_PCIE1_IO_SIZE)
 #define CONFIG_SYS_PCIE2_IO_SIZE	CONFIG_SYS_PCIE1_IO_SIZE
@@ -455,21 +471,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #endif	/* CONFIG_TSEC_ENET */
 
-/*  Contort an addr into the format needed for BATs */
-#ifdef CONFIG_PHYS_64BIT
-#define BAT_PHYS_ADDR(x)         ((unsigned long) \
-				  ((x & 0x00000000ffffffffULL) |	\
-				   ((x & 0x0000000e00000000ULL) >> 24) | \
-				   ((x & 0x0000000100000000ULL) >> 30)))
-#else
-#define BAT_PHYS_ADDR(x)        (x)
-#endif
-
 
-/* Put high physical address bits into the BAT format */
+#ifdef CONFIG_PHYS_64BIT
 #define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8)
 #define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2)
 
+/* Put physical address into the BAT format */
+#define BAT_PHYS_ADDR(low, high) \
+	(low | PHYS_HIGH_TO_BXPN(high) | PHYS_HIGH_TO_BX(high))
+/* Convert high/low pairs to actual 64-bit value */
+#define PAIRED_PHYS_TO_PHYS(low, high) (low | ((u64)high << 32))
+#else
+/* 32-bit systems just ignore the "high" bits */
+#define BAT_PHYS_ADDR(low, high)        (low)
+#define PAIRED_PHYS_TO_PHYS(low, high)  (low)
+#endif
+
 /*
  * BAT0		DDR
  */
@@ -479,12 +496,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * BAT1		LBC (PIXIS/CF)
  */
-#define CONFIG_SYS_DBAT1L	(BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \
+#define CONFIG_SYS_DBAT1L	(BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \
+					       CONFIG_SYS_PHYS_ADDR_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT | \
 				 BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT1U	(CONFIG_SYS_LBC_BASE | BATU_BL_128K \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L	(BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \
+#define CONFIG_SYS_IBAT1L	(BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \
+					       CONFIG_SYS_PHYS_ADDR_HIGH) \
 				 | BATL_PP_RW | BATL_MEMCOHERENCE)
 #define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
@@ -494,40 +513,40 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * BAT2		Rapidio Memory
  */
 #ifdef CONFIG_PCI
-#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
+#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \
+					       CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT \
 				 | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
+#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \
+					       CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 #else /* CONFIG_RIO */
-#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \
+#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \
+					       CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT | \
 				 BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \
+#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \
+					       CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 #endif
 
 /*
  * BAT3		CCSR Space
- * This BAT is used early; don't use any macros with ULL - use HIGH/LOW pairs
- * instead.  The assembler chokes on ULL.
  */
-#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_CCSRBAR_PHYS_LOW \
-				 | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
-				 | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
+#define CONFIG_SYS_DBAT3L	(BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \
+					       CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT \
 				 | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \
 				 | BATU_VP)
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR_PHYS_LOW \
-				 | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
-				 | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
+#define CONFIG_SYS_IBAT3L	(BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \
+					       CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
 
@@ -545,12 +564,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * BAT4		PCIE1_IO and PCIE2_IO
  */
-#define CONFIG_SYS_DBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
+#define CONFIG_SYS_DBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \
+					       CONFIG_SYS_PHYS_ADDR_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT \
 				 | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
+#define CONFIG_SYS_IBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \
+					       CONFIG_SYS_PHYS_ADDR_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
@@ -565,12 +586,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * BAT6		FLASH
  */
-#define CONFIG_SYS_DBAT6L	(BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+#define CONFIG_SYS_DBAT6L	(BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \
+					       CONFIG_SYS_PHYS_ADDR_HIGH) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT \
 				 | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT6U	(CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \
 				 | BATU_VP)
-#define CONFIG_SYS_IBAT6L	(BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+#define CONFIG_SYS_IBAT6L	(BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \
+					       CONFIG_SYS_PHYS_ADDR_HIGH) \
 				 | BATL_PP_RW | BATL_MEMCOHERENCE)
 #define CONFIG_SYS_IBAT6U	CONFIG_SYS_DBAT6U