summaryrefslogtreecommitdiff
path: root/include/configs/MPC8641HPCN.h
diff options
context:
space:
mode:
authorJon Loeliger <jdl@freescale.com>2006-05-09 08:23:49 -0500
committerJon Loeliger <jdl@freescale.com>2006-05-09 08:23:49 -0500
commit18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 (patch)
treec58a863cb0c11ffc1195c32ec1cca598531c20e3 /include/configs/MPC8641HPCN.h
parent5c9efb36a6b5431423f52888a0e3b4b515fe7eca (diff)
downloadu-boot-imx-18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8.zip
u-boot-imx-18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8.tar.gz
u-boot-imx-18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8.tar.bz2
Get MPC8641HPCN flash images working.
Enable the CFI driver. Remove bogus LAWBAR7 cruft. Use correct TEXT_BASE, Fixup load script. Enable SPD EEPROM during DDR setup. Use generic RFC 1918 IP addresses by default.
Diffstat (limited to 'include/configs/MPC8641HPCN.h')
-rw-r--r--include/configs/MPC8641HPCN.h30
1 files changed, 14 insertions, 16 deletions
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 76efd7c..d4a28ed 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -51,6 +51,7 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#undef CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_DDR_ECC /* only for ECC DDR module */
@@ -102,11 +103,9 @@
#else
/*
- * Manually set up DDR parameters
+ * Manually set up DDR1 parameters
*/
-/* DDR I */
-#if 1
#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
#define CFG_DDR_CS0_BNDS 0x0000000F
@@ -125,15 +124,14 @@
#define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */
#define CFG_DDR_CONTROL2 0x04400000
- //Not used in fixed_sdram function
+ /* Not used in fixed_sdram function */
#define CFG_DDR_MODE 0x00000022
#define CFG_DDR_CS1_BNDS 0x00000000
- #define CFG_DDR_CS2_BNDS 0x00000FFF //Not done
- #define CFG_DDR_CS3_BNDS 0x00000FFF //Not done
- #define CFG_DDR_CS4_BNDS 0x00000FFF //Not done
- #define CFG_DDR_CS5_BNDS 0x00000FFF //Not done
-#endif
+ #define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */
+ #define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */
+ #define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */
+ #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */
#endif
@@ -190,6 +188,7 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
@@ -199,14 +198,14 @@
#undef CFG_RAMBOOT
#endif
-#if !defined(CFG_RAMBOOT)
-#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
+#if !defined(CONFIG_SPD_EEPROM) && !defined(CFG_RAMBOOT)
+#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#endif
#undef CONFIG_CLOCKS_IN_MHZ
#define CONFIG_L1_INIT_RAM
-#undef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_LOCK 1
#ifndef CFG_INIT_RAM_LOCK
#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */
#else
@@ -540,22 +539,21 @@
#define CONFIG_HAS_ETH2 1
#define CONFIG_HAS_ETH3 1
-#define CONFIG_IPADDR 10.82.193.138
+#define CONFIG_IPADDR 192.168.1.100
#define CONFIG_HOSTNAME unknown
#define CONFIG_ROOTPATH /opt/nfsroot
#define CONFIG_BOOTFILE uImage
#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_GATEWAYIP 10.82.193.104
+#define CONFIG_GATEWAYIP 192.168.1.1
#define CONFIG_NETMASK 255.255.255.0
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_BAUDRATE 115200