summaryrefslogtreecommitdiff
path: root/include/configs/MPC8610HPCD.h
diff options
context:
space:
mode:
authorYork Sun <yorksun@freescale.com>2007-10-29 13:58:39 -0500
committerJon Loeliger <jdl@freescale.com>2007-11-07 14:09:09 -0600
commita877880c6949e948bd63cd6ea4e216573d2f53dd (patch)
tree08819be1551f93a152085e69d95d8f377418c3d7 /include/configs/MPC8610HPCD.h
parent52e5ddfecdda308f75782fae206b677b1810f5f9 (diff)
downloadu-boot-imx-a877880c6949e948bd63cd6ea4e216573d2f53dd.zip
u-boot-imx-a877880c6949e948bd63cd6ea4e216573d2f53dd.tar.gz
u-boot-imx-a877880c6949e948bd63cd6ea4e216573d2f53dd.tar.bz2
8610: Add 8610 DIU display driver
1280x1024 and 1024x768 @ 32 bpp are supported now. DVI, Single-link LVDS, Double-link LVDS are all supported. Environmental variable "monitor" is used to specify monitor port. A new command "diufb" is introduced to reinitialize monitor and display a BMP file in the memory. So far, 1-bit, 4-bit, 8-bit and 24-bit BMP formats are supported. diufb init - initialize the diu driver Enable the port specified in the environmental variable "monitor" diufb addr - display bmp file in memory. The bmp image should be no bigger than the resolution, 1280x1024 for DVI and double-link LVDS, 1024x768 for single-link LVDS. Note, this driver allocate memory but doesn't free it after use It is written on purpose -- to avoid a failure of reallocation due to memory fragement. ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon loeliger <jdl@freescale.com>
Diffstat (limited to 'include/configs/MPC8610HPCD.h')
-rw-r--r--include/configs/MPC8610HPCD.h19
1 files changed, 14 insertions, 5 deletions
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 9fa42f3..00c94ef 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -21,6 +21,7 @@
#define CONFIG_NUM_CPUS 1 /* Number of CPUs in the system */
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
+#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
#ifdef RUN_DIAG
#define CFG_DIAG_ADDR 0xff800000
#endif
@@ -38,7 +39,7 @@
#define CONFIG_SPD_EEPROM /* Use SPD for DDR */
#undef CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
-#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_NUM_DDR_CONTROLLERS 1
@@ -51,13 +52,14 @@
*/
#define CFG_L2
#define L2_INIT 0
-#define L2_ENABLE (L2CR_L2E)
+#define L2_ENABLE (L2CR_L2E |0x00100000 )
#ifndef CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
#endif
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_R 1
#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
@@ -159,6 +161,7 @@
#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch */
#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
+#define PIXIS_BRDCFG0 0x8 /* PIXIS Board Configuration Register0*/
#define PIXIS_VCTL 0x10 /* VELA Control Register */
#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
@@ -208,7 +211,7 @@
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -474,6 +477,9 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
+/*DIU Configuration*/
+#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/
+
/*
* Miscellaneous configurable options
*/
@@ -621,7 +627,8 @@
"diuregs=md e002c000 1d\0" \
"dium=mw e002c01c\0" \
"diuerr=md e002c014 1\0" \
- "othbootargs=debug\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \
+ "monitor=0-DVI\0" \
"pmregs=md e00e1000 2b\0" \
"lawregs=md e0000c08 4b\0" \
"lbcregs=md e0005000 36\0" \
@@ -641,7 +648,9 @@
"ramdiskfile=8610hpcd/ramdisk.uboot\0" \
"dtbaddr=c00000\0" \
"dtbfile=8610hpcd/mpc8610_hpcd.dtb\0" \
- "bdev=sda3\0"
+ "bdev=sda3\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\
+ "monitor=0-DVI\0"
#endif
#define CONFIG_NFSBOOTCOMMAND \