* Patches by Xianghua Xiao, 15 Oct 2003:

  - Added Motorola CPU 8540/8560 support (cpu/85xx)
  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
  - Added Motorola MPC8560ADS board support (board/mpc8560ads)

* Minor code cleanup

1 files changed, 377 insertions, 0 deletions

diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
new file mode 100644
index 0000000..0d844d1
--- /dev/null
+++ b/include/configs/MPC8560ADS.h
@@ -0,0 +1,377 @@
+/*
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8560ads board configuration file */
+/* please refer to doc/README.mpc85xx for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE		*/
+#define CONFIG_E500		1	/* BOOKE e500 family	*/
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
+#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip */
+#define CONFIG_MPC8560		1	/* MPC8560 specific	*/
+#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific*/
+
+#undef  CONFIG_PCI	         	/* pci ethernet support	*/
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support*/
+#undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
+
+#if defined(CONFIG_MPC85xx_REV1)
+#define CONFIG_DDR_DLL                  /* possible DLL fix needed */
+#endif
+
+/* Using Localbus SDRAM to emulate flash before we can program the flash,
+ * normally you need a flash-boot image(u-boot.bin), if so undef this.
+ */
+#undef CONFIG_RAM_AS_FLASH
+
+#if !defined(CONFIG_PCI)		/* some PCI card is 33Mhz only */
+#define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx */
+#else
+#define CONFIG_SYS_CLK_FREQ     33000000/* most pci cards are 33Mhz */
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)		/* manually set up DDR parameters */
+#define CONFIG_DDR_SETTING
+#endif
+
+/* below can be toggled for performance analysis. otherwise use default */
+#define CONFIG_L2_CACHE                     /* toggle L2 cache         */
+#undef  CONFIG_BTB                          /* toggle branch predition */
+#undef  CONFIG_ADDR_STREAMING               /* toggle addr streaming   */
+
+#define CONFIG_BOARD_PRE_INIT   1           /* Call board_pre_init      */
+
+#undef  CFG_DRAM_TEST                       /* memory test, takes time  */
+#define CFG_MEMTEST_START       0x00200000  /* memtest region */
+#define CFG_MEMTEST_END         0x00400000
+
+#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
+     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
+     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
+#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
+#endif
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
+#define CFG_CCSRBAR             0xfdf00000      /* relocated CCSRBAR    */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory  */
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CFG_SDRAM_SIZE		128		/* DDR is 128MB	*/
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_LBC_SDRAM_BASE      0xfc000000      /* Localbus SDRAM */
+#else
+#define CFG_LBC_SDRAM_BASE      0xf8000000      /* Localbus SDRAM */
+#endif
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_FLASH_BASE        0xf8000000      /* start of FLASH  16M  */
+#define CFG_BR0_PRELIM        0xf8001801      /* port size 32bit */
+#else /* Boot from real Flash */
+#define CFG_FLASH_BASE        0xff000000      /* start of FLASH 16M    */
+#define CFG_BR0_PRELIM        0xff001801      /* port size 32bit      */
+#endif
+
+#define CFG_OR0_PRELIM          0xff006ff7      /* 16MB Flash           */
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device   */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor	*/
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define SPD_EEPROM_ADDRESS 	0x51     	/*  DDR DIMM */
+
+#if defined(CONFIG_DDR_SETTING)
+#define	CFG_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
+#define CFG_DDR_CS0_CONFIG	0x80000002
+#define CFG_DDR_TIMING_1	0x37344321
+#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning*/
+#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR*/
+#define CFG_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x05200100	/* autocharge,no open page*/
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM  */
+#define CFG_OR2_PRELIM		0xfc006901
+#define CFG_LBC_LCRR		0x00030004	/* local bus freq 	*/
+#define CFG_LBC_LBCR		0x00000000
+#define CFG_LBC_LSRT		0x20000000
+#define CFG_LBC_MRTPR		0x20000000
+#define CFG_LBC_LSDMR_1		0x2861b723
+#define CFG_LBC_LSDMR_2		0x0861b723
+#define CFG_LBC_LSDMR_3		0x0861b723
+#define CFG_LBC_LSDMR_4		0x1861b723
+#define CFG_LBC_LSDMR_5		0x4061b723
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#else
+#define CFG_BR4_PRELIM          0xfc000801      /* 32KB, 8-bit wide for ADS config reg */
+#endif
+#define CFG_OR4_PRELIM		0xffffe1f1
+#define CFG_BCSR		(CFG_BR4_PRELIM & 0xffff8000)
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR       0x40000000      /* Initial RAM address  */
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_ON_SCC              	/* define if console on SCC */
+#undef  CONFIG_CONS_NONE                	/* define if console on something else */
+#define CONFIG_CONS_INDEX       1       	/* which serial channel for console */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define  CONFIG_HARD_I2C    		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}  /* Don't probe these addrs */
+
+#define CFG_PCI_MEM_BASE	0xe0000000
+#define CFG_PCI_MEM_PHYS	0xe0000000
+#define CFG_PCI_MEM_SIZE	0x10000000
+
+#if defined(CONFIG_PCI) 		/* PCI Ethernet card */
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
+#undef CONFIG_TULIP
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+  #if !defined(CONFIG_PCI_PNP)
+  #define PCI_ENET0_IOADDR    	0xe0000000
+  #define PCI_ENET0_MEMADDR     0xe0000000
+  #define PCI_IDSEL_NUMBER      0x0c 	/* slot0->3(IDSEL)=12->15 */
+  #endif
+#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#if defined(CONFIG_MPC85xx_REV1) 	/* Errata PCI 7 */
+  #define CFG_PCI_SUBSYS_DEVICEID 0x0003
+#else
+  #define CFG_PCI_SUBSYS_DEVICEID 0x0009
+#endif
+#elif defined(CONFIG_TSEC_ENET) 	/* TSEC Ethernet port */
+#define CONFIG_NET_MULTI 	1
+#define CONFIG_PHY_M88E1011      1       /* GigaBit Ether PHY        */
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		8	/* PHY address			*/
+#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
+#define CONFIG_ETHER_ON_FCC             /* define if ether on FCC   */
+#undef  CONFIG_ETHER_NONE               /* define if ether on something else */
+#define CONFIG_ETHER_INDEX      2       /* which channel for ether  */
+  #if (CONFIG_ETHER_INDEX == 2)
+  /*
+   * - Rx-CLK is CLK13
+   * - Tx-CLK is CLK14
+   * - Select bus for bd/buffers
+   * - Full duplex
+   */
+  #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CFG_CPMFCR_RAMTYPE    0
+  #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
+  #define FETH2_RST		0x01
+  #elif (CONFIG_ETHER_INDEX == 3)
+  /* need more definitions here for FE3 */
+  #define FETH3_RST		0x80
+  #endif  				/* CONFIG_ETHER_INDEX */
+#define CONFIG_MII			/* MII PHY management */
+#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT	2		/* Port C */
+#define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
+#define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
+#define MDIO_READ	((iop->pdat &  0x00400000) != 0)
+
+#define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
+			else	iop->pdat &= ~0x00400000
+
+#define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
+			else	iop->pdat &= ~0x00200000
+
+#define MIIDELAY	udelay(1)
+#endif
+
+/* Environment */
+#ifndef CFG_RAMBOOT
+  #if defined(CONFIG_RAM_AS_FLASH)
+  #define CFG_ENV_IS_NOWHERE
+  #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
+  #define CFG_ENV_SIZE		0x2000
+  #else
+  #define CFG_ENV_IS_IN_FLASH	1
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x40000	/* 128K(one sector) for env */
+  #endif
+  #define CFG_ENV_SIZE		0x2000
+#else
+#define CFG_NO_FLASH		1	/* Flash is not usable now	*/
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200"
+/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
+#define CONFIG_BOOTCOMMAND	"bootm 0xff400000 0xff700000"
+#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				 ~(CFG_CMD_ENV | \
+				  CFG_CMD_LOADS ))
+  #elif defined(CONFIG_TSEC_ENET)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | \
+				CFG_CMD_I2C ) & \
+				~(CFG_CMD_ENV))
+  #elif defined(CONFIG_ETHER_ON_FCC)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				~(CFG_CMD_ENV))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_PING | CFG_CMD_I2C)
+  #elif defined(CONFIG_TSEC_ENET)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | \
+				CFG_CMD_I2C)
+  #elif defined(CONFIG_ETHER_ON_FCC)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_PING | CFG_CMD_I2C)
+  #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"MPC8560ADS=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x1000000	/* default load address */
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*Note: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#define CONFIG_ETHADDR  00:01:af:07:9b:8a
+#define CONFIG_ETH1ADDR  00:01:af:07:9b:8b
+#define CONFIG_ETH2ADDR  00:01:af:07:9b:8c
+#endif
+
+#define CONFIG_SERVERIP 	163.12.64.52
+#define CONFIG_IPADDR  		10.82.0.105
+#define CONFIG_GATEWAYIP	10.82.1.254
+#define CONFIG_NETMASK		255.255.254.0
+#define CONFIG_HOSTNAME 	MPC8560ADS_PILOT_003
+#define CONFIG_ROOTPATH 	/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
+#define CONFIG_BOOTFILE 	pImage
+
+#endif	/* __CONFIG_H */