Merge commit 'wd/master'

1 files changed, 19 insertions, 19 deletions

diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 77eea73..b13c81c 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -30,14 +30,14 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 /* High Level Configuration Options */
-#define CONFIG_BOOKE		1	    /* BOOKE 			*/
+#define CONFIG_BOOKE		1	    /* BOOKE			*/
 #define CONFIG_E500		1	    /* BOOKE e500 family	*/
 #define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
 #define CONFIG_MPC8540		1	    /* MPC8540 specific	        */
 #define CONFIG_MPC8540EVAL	1	    /* MPC8540EVAL board specific */
 
-#undef  CONFIG_PCI	         	    /* pci ethernet support	*/
-#define CONFIG_TSEC_ENET 		    /* tsec ethernet support  */
+#undef  CONFIG_PCI			    /* pci ethernet support	*/
+#define CONFIG_TSEC_ENET		    /* tsec ethernet support  */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM                   /* Use SPD EEPROM for DDR setup */
 #undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
@@ -63,7 +63,7 @@
 #endif
 
 /* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE		    	    /* toggle L2 cache 	*/
+#define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
 #undef  CONFIG_BTB			    /* toggle branch predition */
 #undef  CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
@@ -81,8 +81,8 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR 	*/
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
 #define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
 
@@ -113,7 +113,7 @@
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
 #define CFG_FLASH_CFI		1
 
-#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
@@ -150,16 +150,16 @@
 #define CFG_BCSR                (CFG_BR4_PRELIM & 0xffff8000)
 
 #define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 	1
-#define CFG_INIT_RAM_ADDR   	0x40000000 	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
+#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
@@ -168,7 +168,7 @@
 #define CFG_NS16550_SERIAL
 #define CFG_NS16550_REG_SIZE    1
 #define CFG_NS16550_CLK		get_bus_freq(0)
-#define CONFIG_BAUDRATE	 	115200
+#define CONFIG_BAUDRATE		115200
 
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
@@ -203,17 +203,17 @@
 #define CONFIG_NET_MULTI
 #undef CONFIG_EEPRO100
 #define CONFIG_TULIP
-#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #if !defined(CONFIG_PCI_PNP)
 #define PCI_ENET0_IOADDR      0xe0000000
 #define PCI_ENET0_MEMADDR     0xe0000000
-#define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
+#define PCI_IDSEL_NUMBER      0x0c	/*slot0->3(IDSEL)=12->15*/
 #endif
 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 #define CFG_PCI_SUBSYS_DEVICEID 0x0008
 #elif defined(CONFIG_TSEC_ENET)
-#define CONFIG_NET_MULTI 	1
+#define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1	/* MII PHY management	*/
 #define CONFIG_TSEC1    1
 #define CONFIG_HAS_ETH0
@@ -262,7 +262,7 @@
 
 #define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
 #define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY	3 	/* -1 disable autoboot */
+#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -318,7 +318,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Internal Definitions