summaryrefslogtreecommitdiff
path: root/include/configs/MPC8266ADS.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-05-31 18:35:21 +0000
committerwdenk <wdenk>2003-05-31 18:35:21 +0000
commit7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed (patch)
tree5c273df9c5efa7b1b6a4ca88904e48039ef591e8 /include/configs/MPC8266ADS.h
parent3b57fe0a70b903f4db66c558bb9828bc58acf06b (diff)
downloadu-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.zip
u-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.gz
u-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.bz2
* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
Diffstat (limited to 'include/configs/MPC8266ADS.h')
-rw-r--r--include/configs/MPC8266ADS.h44
1 files changed, 37 insertions, 7 deletions
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index e0159a2..414d515 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -27,7 +27,18 @@
*/
/*
- * Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
+ * Config header file for a MPC8266ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
+ */
+
+/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ !! !!
+ !! This configuration requires JP3 to be in position 1-2 to work !!
+ !! To make it work for the default, the TEXT_BASE define in !!
+ !! board/mpc8266ads/config.mk must be changed from 0xfe000000 to !!
+ !! 0xfff00000 !!
+ !! The CFG_HRCW_MASTER define below must also be changed to match !!
+ !! !!
+ !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*/
#ifndef __CONFIG_H
@@ -375,6 +386,7 @@
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */
/* 0x0EB2B645 */
#define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\
( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB010 ) |\
@@ -382,8 +394,10 @@
( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \
)
+/* Use this HRCW for booting from address 0xfff0000 (JP3 in setting 2-3) */
+/* #define CFG_HRCW_MASTER 0x0cb23645 */
-/* This value should actually be situated in the first 256 bytes of the FLASH
+/* This value should actually be situated in the first 256 bytes of the FLASH
which on the standard MPC8266ADS board is at address 0xFF800000
The linker script places it at 0xFFF00000 instead.
@@ -395,8 +409,7 @@
- Rune
- */
-/* #define CFG_HRCW_MASTER 0x0cb23645 */
+*/
/* no slaves */
#define CFG_HRCW_SLAVE1 0
@@ -436,7 +449,24 @@
#endif
-#define CFG_HID0_INIT 0
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+/*#define CFG_HID0_INIT 0 */
+#define CFG_HID0_INIT (HID0_ICE |\
+ HID0_DCE |\
+ HID0_ICFI |\
+ HID0_DCI |\
+ HID0_IFEM |\
+ HID0_ABE)
+
#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
#define CFG_HID2 0
@@ -519,7 +549,7 @@
#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
-#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
@@ -530,7 +560,7 @@
*/
#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */
-#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
+#define CFG_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */
#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */
#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)