Merge branch 'master' of /home/stefan/git/u-boot/u-boot

1 files changed, 69 insertions, 69 deletions

diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 35f048e..779d373 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -39,9 +39,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
@@ -92,22 +92,22 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #ifdef CONFIG_MCFFEC
@@ -132,108 +132,108 @@
 	"save\0"				\
 	""
 
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
 #endif
 
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		0x20000
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
-#define CFG_HZ			1000
-#define CFG_CLK			66000000
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		0x20000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			66000000
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define CFG_SCR			0x0003
-#define CFG_SPR			0xffff
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define CONFIG_SYS_SCR			0x0003
+#define CONFIG_SYS_SPR			0xffff
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM    */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		4	/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		4	/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		0xffe00000
 
 #ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CFG_BR0_PRELIM		0xFFE00201
-#define CFG_OR0_PRELIM		0xFFE00014
-#define CFG_BR1_PRELIM		0
-#define CFG_OR1_PRELIM		0
-#define CFG_BR2_PRELIM		0x30000001
-#define CFG_OR2_PRELIM		0xFFF80000
-#define CFG_BR3_PRELIM		0
-#define CFG_OR3_PRELIM		0
-#define CFG_BR4_PRELIM		0
-#define CFG_OR4_PRELIM		0
-#define CFG_BR5_PRELIM		0
-#define CFG_OR5_PRELIM		0
-#define CFG_BR6_PRELIM		0
-#define CFG_OR6_PRELIM		0
-#define CFG_BR7_PRELIM		0x00000701
-#define CFG_OR7_PRELIM		0xFFC0007C
+#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
+#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
+#define CONFIG_SYS_BR1_PRELIM		0
+#define CONFIG_SYS_OR1_PRELIM		0
+#define CONFIG_SYS_BR2_PRELIM		0x30000001
+#define CONFIG_SYS_OR2_PRELIM		0xFFF80000
+#define CONFIG_SYS_BR3_PRELIM		0
+#define CONFIG_SYS_OR3_PRELIM		0
+#define CONFIG_SYS_BR4_PRELIM		0
+#define CONFIG_SYS_OR4_PRELIM		0
+#define CONFIG_SYS_BR5_PRELIM		0
+#define CONFIG_SYS_OR5_PRELIM		0
+#define CONFIG_SYS_BR6_PRELIM		0
+#define CONFIG_SYS_OR6_PRELIM		0
+#define CONFIG_SYS_BR7_PRELIM		0x00000701
+#define CONFIG_SYS_OR7_PRELIM		0xFFC0007C
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_PACNT		0x00000000
-#define CFG_PADDR		0x0000
-#define CFG_PADAT		0x0000
-#define CFG_PBCNT		0x55554155	/* Ethernet/UART configuration */
-#define CFG_PBDDR		0x0000
-#define CFG_PBDAT		0x0000
-#define CFG_PDCNT		0x00000000
+#define CONFIG_SYS_PACNT		0x00000000
+#define CONFIG_SYS_PADDR		0x0000
+#define CONFIG_SYS_PADAT		0x0000
+#define CONFIG_SYS_PBCNT		0x55554155	/* Ethernet/UART configuration */
+#define CONFIG_SYS_PBDDR		0x0000
+#define CONFIG_SYS_PBDAT		0x0000
+#define CONFIG_SYS_PDCNT		0x00000000
 #endif				/* _M5272C3_H */