summaryrefslogtreecommitdiff
path: root/include/configs/M5253EVBE.h
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2008-10-16 15:01:15 +0200
committerWolfgang Denk <wd@denx.de>2008-10-18 21:54:03 +0200
commit6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch)
treeae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /include/configs/M5253EVBE.h
parent71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff)
downloadu-boot-imx-6d0f6bcf337c5261c08fabe12982178c2c489d76.zip
u-boot-imx-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.gz
u-boot-imx-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.bz2
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'include/configs/M5253EVBE.h')
-rw-r--r--include/configs/M5253EVBE.h144
1 files changed, 72 insertions, 72 deletions
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index f58f89c..c2cd62b 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -31,9 +31,9 @@
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG /* disable watchdog */
@@ -81,45 +81,45 @@
#define CONFIG_ATAPI
#undef CONFIG_LBA48
-#define CFG_IDE_MAXBUS 1
-#define CFG_IDE_MAXDEVICE 2
+#define CONFIG_SYS_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXDEVICE 2
-#define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800)
-#define CFG_ATA_IDE0_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800)
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0
-#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
-#define CFG_ATA_STRIDE 4 /* Interval between registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
#define _IO_BASE 0
-#define CFG_PROMPT "=> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00100000
+#define CONFIG_SYS_LOAD_ADDR 0x00100000
-#define CFG_MEMTEST_START 0x400
-#define CFG_MEMTEST_END 0x380000
+#define CONFIG_SYS_MEMTEST_START 0x400
+#define CONFIG_SYS_MEMTEST_END 0x380000
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
-#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */
-#define CFG_FAST_CLK
-#ifdef CFG_FAST_CLK
-# define CFG_PLLCR 0x1243E054
-# define CFG_CLK 140000000
+#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
+# define CONFIG_SYS_PLLCR 0x1243E054
+# define CONFIG_SYS_CLK 140000000
#else
-# define CFG_PLLCR 0x135a4140
-# define CFG_CLK 70000000
+# define CONFIG_SYS_PLLCR 0x135a4140
+# define CONFIG_SYS_CLK 70000000
#endif
/*
@@ -128,85 +128,85 @@
* You should know what you are doing if you make changes here.
*/
-#define CFG_MBAR 0x10000000 /* Register Base Addrs */
-#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */
+#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */
+#define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */
/*
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 8 /* SDRAM size in MB */
#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE 0x20000
+#define CONFIG_SYS_MONITOR_BASE 0x20000
#else
-#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
-#define CFG_MONITOR_LEN 0x40000
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_BOOTPARAMS_LEN (64*1024)
+#define CONFIG_SYS_MONITOR_LEN 0x40000
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
/* FLASH organization */
-#define CFG_FLASH_BASE 0xffe00000
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 1000
+#define CONFIG_SYS_FLASH_BASE 0xffe00000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
-#define CFG_FLASH_CFI 1
+#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_SIZE 0x200000
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE 0x200000
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
/* Cache Configuration */
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/* Port configuration */
-#define CFG_FECI2C 0xF0
+#define CONFIG_SYS_FECI2C 0xF0
-#define CFG_CSAR0 0xFFE0
-#define CFG_CSMR0 0x001F0021
-#define CFG_CSCR0 0x1D80
+#define CONFIG_SYS_CSAR0 0xFFE0
+#define CONFIG_SYS_CSMR0 0x001F0021
+#define CONFIG_SYS_CSCR0 0x1D80
-#define CFG_CSAR1 0
-#define CFG_CSMR1 0
-#define CFG_CSCR1 0
+#define CONFIG_SYS_CSAR1 0
+#define CONFIG_SYS_CSMR1 0
+#define CONFIG_SYS_CSCR1 0
-#define CFG_CSAR2 0
-#define CFG_CSMR2 0
-#define CFG_CSCR2 0
+#define CONFIG_SYS_CSAR2 0
+#define CONFIG_SYS_CSMR2 0
+#define CONFIG_SYS_CSCR2 0
-#define CFG_CSAR3 0
-#define CFG_CSMR3 0
-#define CFG_CSCR3 0
+#define CONFIG_SYS_CSAR3 0
+#define CONFIG_SYS_CSMR3 0
+#define CONFIG_SYS_CSCR3 0
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
-#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
-#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */
-#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */
-#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */
-#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
-#define CFG_GPIO1_LED 0x00400000 /* user led */
+#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
+#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
+#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */
+#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */
+#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */
#endif /* _M5253EVB_H */