Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 91 insertions, 91 deletions

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 1627344..a399d22 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -64,7 +64,7 @@
 /*
  * Set allowable console baud rates
  */
-#define CFG_BAUDRATE_TABLE		{ 9600,		\
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600,		\
 					  19200,	\
 					  38400,	\
 					  57600,	\
@@ -74,7 +74,7 @@
 /*
  * Print console information
  */
-#undef	 CFG_CONSOLE_INFO_QUIET
+#undef	 CONFIG_SYS_CONSOLE_INFO_QUIET
 
 /*
  * Set the autoboot delay in seconds.  A delay of -1 disables autoboot
@@ -101,12 +101,12 @@
  * for downloads
  */
 #undef	CONFIG_LOADS_ECHO
-#define	CFG_LOADS_BAUD_CHANGE
+#define	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /*
  * Set default load address for tftp network downloads
  */
-#define	CFG_TFTP_LOADADDR				0x01000000
+#define	CONFIG_SYS_TFTP_LOADADDR				0x01000000
 
 /*
  * Turn off the watchdog timer
@@ -127,7 +127,7 @@
  * Reset address. We pick an address such that when an instruction
  * is executed at that address, a machine check exception occurs
  */
-#define CFG_RESET_ADDRESS				((ulong) -1)
+#define CONFIG_SYS_RESET_ADDRESS				((ulong) -1)
 
 /*
  * BOOTP options
@@ -145,7 +145,7 @@
  * MII address is hardwired on the board to zero.
  */
 #define CONFIG_FEC_ENET
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII
 #define CONFIG_MII_INIT			1
 #define CONFIG_PHY_ADDR			0
@@ -162,10 +162,10 @@
  * This board has a 32 kibibyte EEPROM (Atmel AT24C256) connected to
  * the MPC860T I2C interface.
  */
-#define CFG_I2C_EEPROM_ADDR				0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS		6		/* 64 byte pages		*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	12		/* 10 mS w/ 20% margin	*/
-#define	CFG_I2C_EEPROM_ADDR_LEN			2		/* need 16 bit address	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR				0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS		6		/* 64 byte pages		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	12		/* 10 mS w/ 20% margin	*/
+#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN			2		/* need 16 bit address	*/
 #define CONFIG_ENV_EEPROM_SIZE				(32 * 1024)
 
 /*
@@ -175,8 +175,8 @@
 #undef	CONFIG_SOFT_I2C						/* Bit-banged I2C			*/
 
 #ifdef CONFIG_HARD_I2C
-#define	CFG_I2C_SPEED		100000			/* clock speed in Hz		*/
-#define CFG_I2C_SLAVE		0xFE			/* I2C slave address		*/
+#define	CONFIG_SYS_I2C_SPEED		100000			/* clock speed in Hz		*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE			/* I2C slave address		*/
 #endif
 
 #ifdef CONFIG_SOFT_I2C
@@ -208,7 +208,7 @@
  * length of time, so we use an external RTC on the I2C bus instead.
  */
 #define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR				0x68
+#define CONFIG_SYS_I2C_RTC_ADDR				0x68
 
 #else
 /*
@@ -220,11 +220,11 @@
 /*
  * Power On Self Test support
  */
-#define CONFIG_POST			  ( CFG_POST_CACHE		| \
-								CFG_POST_MEMORY		| \
-								CFG_POST_CPU		| \
-								CFG_POST_UART		| \
-								CFG_POST_SPR )
+#define CONFIG_POST			  ( CONFIG_SYS_POST_CACHE		| \
+								CONFIG_SYS_POST_MEMORY		| \
+								CONFIG_SYS_POST_CPU		| \
+								CONFIG_SYS_POST_UART		| \
+								CONFIG_SYS_POST_SPR )
 
 
 /*
@@ -277,7 +277,7 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_VIRTEX2
-#define CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 
 #define CONFIG_NAND_LEGACY
@@ -285,64 +285,64 @@
 /*
  * Verbose help from command monitor.
  */
-#define	CFG_LONGHELP
+#define	CONFIG_SYS_LONGHELP
 #if !defined(CONFIG_SC)
-#define	CFG_PROMPT			"B2> "
+#define	CONFIG_SYS_PROMPT			"B2> "
 #else
-#define	CFG_PROMPT			"SC> "
+#define	CONFIG_SYS_PROMPT			"SC> "
 #endif
 
 
 /*
  * Use the "hush" command parser
  */
-#define	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * Set buffer size for console I/O
  */
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE			1024
+#define	CONFIG_SYS_CBSIZE			1024
 #else
-#define	CFG_CBSIZE			256
+#define	CONFIG_SYS_CBSIZE			256
 #endif
 
 /*
  * Print buffer size
  */
-#define	CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /*
  * Maximum number of arguments that a command can accept
  */
-#define	CFG_MAXARGS			16
+#define	CONFIG_SYS_MAXARGS			16
 
 /*
  * Boot argument buffer size
  */
-#define CFG_BARGSIZE		CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /*
  * Default memory test range
  */
-#define CFG_MEMTEST_START	0x0100000
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START  + (128 * 1024))
+#define CONFIG_SYS_MEMTEST_START	0x0100000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START  + (128 * 1024))
 
 /*
  * Select the more full-featured memory test
  */
-#define	CFG_ALT_MEMTEST
+#define	CONFIG_SYS_ALT_MEMTEST
 
 /*
  * Default load address
  */
-#define	CFG_LOAD_ADDR		0x01000000
+#define	CONFIG_SYS_LOAD_ADDR		0x01000000
 
 /*
  * Set decrementer frequency (1 ms ticks)
  */
-#define	CFG_HZ				1000
+#define	CONFIG_SYS_HZ				1000
 
 /*
  * Device memory map (after SDRAM remap to 0x0):
@@ -363,7 +363,7 @@
 /*
  * Base addresses and block sizes
  */
-#define CFG_IMMR			0xFF000000
+#define CONFIG_SYS_IMMR			0xFF000000
 
 #define SDRAM_BASE			0x00000000
 #define SDRAM_SIZE			(64 * 1024 * 1024)
@@ -386,27 +386,27 @@
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR		CFG_IMMR
-#define	CFG_INIT_RAM_END		0x2F00	/* End of used area in DPRAM		*/
-#define	CFG_INIT_DATA_SIZE		64	/* # bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET		(CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END		0x2F00	/* End of used area in DPRAM		*/
+#define	CONFIG_SYS_INIT_DATA_SIZE		64	/* # bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE			SDRAM_BASE
+#define	CONFIG_SYS_SDRAM_BASE			SDRAM_BASE
 
 /*
  * FLASH organization
  */
-#define CFG_FLASH_BASE			FLASH_BASE
-#define CFG_FLASH_SIZE			FLASH_SIZE
-#define CFG_FLASH_SECT_SIZE		(128 * 1024)
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		128
+#define CONFIG_SYS_FLASH_BASE			FLASH_BASE
+#define CONFIG_SYS_FLASH_SIZE			FLASH_SIZE
+#define CONFIG_SYS_FLASH_SECT_SIZE		(128 * 1024)
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		128
 
 /*
  * The timeout values are for an entire chip and are in milliseconds.
@@ -415,20 +415,20 @@
  * case VCC and temp after 100K programming cycles.  It works out
  * to 280 minutes (might as well be forever).
  */
-#define CFG_FLASH_ERASE_TOUT	(CFG_MAX_FLASH_SECT * 5000)
-#define CFG_FLASH_WRITE_TOUT	(CFG_MAX_FLASH_SECT * 128 * 1024 * 1)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(CONFIG_SYS_MAX_FLASH_SECT * 5000)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(CONFIG_SYS_MAX_FLASH_SECT * 128 * 1024 * 1)
 
 /*
  * Allow direct writes to FLASH from tftp transfers (** dangerous **)
  */
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /*
  * Reserve memory for U-Boot.
  */
-#define CFG_MAX_UBOOT_SECTS		4
-#define	CFG_MONITOR_LEN			(CFG_MAX_UBOOT_SECTS * CFG_FLASH_SECT_SIZE)
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MAX_UBOOT_SECTS		4
+#define	CONFIG_SYS_MONITOR_LEN			(CONFIG_SYS_MAX_UBOOT_SECTS * CONFIG_SYS_FLASH_SECT_SIZE)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
 /*
  * Select environment placement.  NOTE that u-boot.lds must
@@ -442,7 +442,7 @@
 #define CONFIG_ENV_OFFSET			(CONFIG_ENV_EEPROM_SIZE - (8 * 1024))
 #else
 #define CONFIG_ENV_SIZE			0x1000
-#define CONFIG_ENV_SECT_SIZE		CFG_FLASH_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_FLASH_SECT_SIZE
 
 /*
  * This ultimately gets passed right into the linker script, so we have to
@@ -454,21 +454,21 @@
 /*
  * Reserve memory for malloc()
  */
-#define	CFG_MALLOC_LEN		(128 * 1024)
+#define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define	CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE		16	/* For all MPC8xx CPUs				*/
+#define CONFIG_SYS_CACHELINE_SIZE		16	/* For all MPC8xx CPUs				*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT		4	/* log base 2 of above value		*/
+#define CONFIG_SYS_CACHELINE_SHIFT		4	/* log base 2 of above value		*/
 #endif
 
 /*------------------------------------------------------------------------
@@ -479,7 +479,7 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	( SYPCR_SWTC	| \
+#define CONFIG_SYS_SYPCR	( SYPCR_SWTC	| \
 					  SYPCR_BMT	| \
 					  SYPCR_BME	| \
 					  SYPCR_SWF	| \
@@ -488,7 +488,7 @@
 					  SYPCR_SWP		  \
 					)
 #else
-#define CFG_SYPCR	( SYPCR_SWTC	| \
+#define CONFIG_SYS_SYPCR	( SYPCR_SWTC	| \
 					  SYPCR_BMT	| \
 					  SYPCR_BME	| \
 					  SYPCR_SWF	| \
@@ -501,7 +501,7 @@
  *-----------------------------------------------------------------------
  * Set debug pin mux, enable SPKROUT and GPLB5*.
  */
-#define CFG_SIUMCR	( SIUMCR_DBGC11 | \
+#define CONFIG_SYS_SIUMCR	( SIUMCR_DBGC11 | \
 					  SIUMCR_DBPC11 | \
 					  SIUMCR_MLRC11	| \
 					  SIUMCR_GB5E	  \
@@ -512,7 +512,7 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freeze enabled
  */
-#define CFG_TBSCR	( TBSCR_REFA | \
+#define CONFIG_SYS_TBSCR	( TBSCR_REFA | \
 					  TBSCR_REFB | \
 					  TBSCR_TBF	   \
 					)
@@ -521,7 +521,7 @@
  * RTCSC - Real-Time Clock Status and Control Register			UM 11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	( RTCSC_SEC	| \
+#define CONFIG_SYS_RTCSC	( RTCSC_SEC	| \
 					  RTCSC_ALR | \
 					  RTCSC_RTF | \
 					  RTCSC_RTE	  \
@@ -532,7 +532,7 @@
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	( PISCR_PS		| \
+#define CONFIG_SYS_PISCR	( PISCR_PS		| \
 					  PISCR_PITF	  \
 					)
 
@@ -542,7 +542,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit. Set MF for 1:2:1 mode.
  */
-#define CFG_PLPRCR	( ((0x1 << PLPRCR_MF_SHIFT) & PLPRCR_MF_MSK)	| \
+#define CONFIG_SYS_PLPRCR	( ((0x1 << PLPRCR_MF_SHIFT) & PLPRCR_MF_MSK)	| \
 					  PLPRCR_SPLSS	| \
 					  PLPRCR_TEXPS	| \
 					  PLPRCR_TMIST	  \
@@ -557,7 +557,7 @@
 #define SCCR_MASK   SCCR_EBDF11
 
 #if !defined(CONFIG_SC)
-#define CFG_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
+#define CONFIG_SYS_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
 					  SCCR_COM00		|	/* full strength CLKOUT	*/ \
 					  SCCR_DFSYNC00	|	/* SYNCLK / 1 (normal)	*/ \
 					  SCCR_DFBRG00		|	/* BRGCLK / 1 (normal)	*/ \
@@ -565,7 +565,7 @@
 					  SCCR_DFNH000		  \
 					)
 #else
-#define CFG_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
+#define CONFIG_SYS_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
 					  SCCR_COM00		|	/* full strength CLKOUT	*/ \
 					  SCCR_DFSYNC00	|	/* SYNCLK / 1 (normal)	*/ \
 					  SCCR_DFBRG00		|	/* BRGCLK / 1 (normal)	*/ \
@@ -581,7 +581,7 @@
  *-----------------------------------------------------------------------
  * Mask all events that can cause entry into debug mode
  */
-#define CFG_DER				0
+#define CONFIG_SYS_DER				0
 
 /*
  * Initialize Memory Controller:
@@ -593,13 +593,13 @@
 /*
  * Flash address mask
  */
-#define CFG_PRELIM_OR_AM	0xfe000000
+#define CONFIG_SYS_PRELIM_OR_AM	0xfe000000
 
 /*
  * FLASH timing:
  * 33 Mhz bus with ACS = 11, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1
  */
-#define CFG_OR_TIMING_FLASH	( OR_CSNT_SAM	| \
+#define CONFIG_SYS_OR_TIMING_FLASH	( OR_CSNT_SAM	| \
 							  OR_ACS_DIV2	| \
 							  OR_BI			| \
 							  OR_SCY_2_CLK	| \
@@ -607,11 +607,11 @@
 							  OR_EHTR		  \
 							)
 
-#define CFG_OR0_PRELIM	( CFG_PRELIM_OR_AM		| \
-						  CFG_OR_TIMING_FLASH	  \
+#define CONFIG_SYS_OR0_PRELIM	( CONFIG_SYS_PRELIM_OR_AM		| \
+						  CONFIG_SYS_OR_TIMING_FLASH	  \
 						)
 
-#define CFG_BR0_PRELIM	( (FLASH_BASE0_PRELIM & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR0_PRELIM	( (FLASH_BASE0_PRELIM & BR_BA_MSK)	| \
 						  BR_MS_GPCM						| \
 						  BR_PS_8							| \
 						  BR_V								  \
@@ -620,12 +620,12 @@
 /*
  * SDRAM configuration
  */
-#define CFG_OR1_AM	0xfc000000
-#define CFG_OR1		( (CFG_OR1_AM & OR_AM_MSK)	| \
+#define CONFIG_SYS_OR1_AM	0xfc000000
+#define CONFIG_SYS_OR1		( (CONFIG_SYS_OR1_AM & OR_AM_MSK)	| \
 					  OR_CSNT_SAM				  \
 					)
 
-#define CFG_BR1		( (SDRAM_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR1		( (SDRAM_BASE & BR_BA_MSK)	| \
 					  BR_MS_UPMA				| \
 					  BR_PS_32					| \
 					  BR_V						  \
@@ -635,17 +635,17 @@
  * Refresh rate 7.8 us (= 64 ms / 8K = 31.2 uS quad bursts) for one bank
  * of 256 MBit SDRAM
  */
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16
 
 /*
  * Periodic timer for refresh @ 33 MHz system clock
  */
-#define CFG_MAMR_PTA	64
+#define CONFIG_SYS_MAMR_PTA	64
 
 /*
  * MAMR settings for SDRAM
  */
-#define CFG_MAMR_8COL	( (CFG_MAMR_PTA << MAMR_PTA_SHIFT)	| \
+#define CONFIG_SYS_MAMR_8COL	( (CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)	| \
 						  MAMR_PTAE				| \
 						  MAMR_AMA_TYPE_1			| \
 						  MAMR_DSA_1_CYCL			| \
@@ -660,7 +660,7 @@
  * 33 MHz bus with TRLX=1, ACS=11, CSNT=1, EBDF=1, SCY=2, EHTR=1,
  * no burst.
  */
-#define CFG_OR2_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
+#define CONFIG_SYS_OR2_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
 						  OR_CSNT_SAM				| \
 						  OR_ACS_DIV2				| \
 						  OR_BI						| \
@@ -669,7 +669,7 @@
 						  OR_EHTR					  \
 						)
 
-#define CFG_BR2_PRELIM	( (DOC_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR2_PRELIM	( (DOC_BASE & BR_BA_MSK)	| \
 						  BR_PS_8					| \
 						  BR_MS_GPCM				| \
 						  BR_V						  \
@@ -683,12 +683,12 @@
  * the cycle will still complete even if there is a configuration
  * error that prevents TA from asserting on FPGA accesss.
  */
-#define CFG_OR3_PRELIM	( (0xfc000000 & OR_AM_MSK)  | \
+#define CONFIG_SYS_OR3_PRELIM	( (0xfc000000 & OR_AM_MSK)  | \
 						  OR_SCY_15_CLK				| \
 						  OR_BI					  \
 						)
 
-#define CFG_BR3_PRELIM	( (FPGA_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR3_PRELIM	( (FPGA_BASE & BR_BA_MSK)	| \
 						  BR_PS_32					| \
 						  BR_MS_GPCM				| \
 						  BR_V						  \
@@ -698,12 +698,12 @@
  * 33 MHz bus, UPMB, no burst. Do not assert GPLB5 on falling edge
  * of GCLK1_50
  */
-#define CFG_OR4_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
+#define CONFIG_SYS_OR4_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
 						  OR_G5LS						| \
 						  OR_BI							  \
 						)
 
-#define CFG_BR4_PRELIM	( (SELECTMAP_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR4_PRELIM	( (SELECTMAP_BASE & BR_BA_MSK)	| \
 						  BR_PS_8						| \
 						  BR_MS_UPMB					| \
 						  BR_V							  \
@@ -717,7 +717,7 @@
  * the cycle will still complete even if there is a configuration
  * error that prevents TA from asserting on FPGA accesss.
  */
-#define CFG_OR5_PRELIM	( (0xffff0000 & OR_AM_MSK)  | \
+#define CONFIG_SYS_OR5_PRELIM	( (0xffff0000 & OR_AM_MSK)  | \
 						  OR_SCY_15_CLK				| \
 						  OR_EHTR					| \
 						  OR_TRLX					| \
@@ -725,7 +725,7 @@
 						  OR_BI						  \
 						)
 
-#define CFG_BR5_PRELIM	( (M1553_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR5_PRELIM	( (M1553_BASE & BR_BA_MSK)	| \
 						  BR_PS_16					| \
 						  BR_MS_GPCM				| \
 						  BR_V						  \
@@ -741,10 +741,10 @@
  * Disk On Chip (millenium) configuration
  */
 #if !defined(CONFIG_SC)
-#define CFG_MAX_DOC_DEVICE	1
-#undef	CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
-#undef	CFG_DOC_PASSIVE_PROBE
+#define CONFIG_SYS_MAX_DOC_DEVICE	1
+#undef	CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
+#undef	CONFIG_SYS_DOC_PASSIVE_PROBE
 #endif
 
 /*