rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 68 insertions, 68 deletions

diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index c6a3b8b..ff58ea9 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -97,7 +97,7 @@
 #define CONFIG_RTC_DS164x	1	/* RTC is a Dallas DS1646	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	  CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	  CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 
 /*
@@ -112,25 +112,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT     "LEOX_elpt860: " /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT     "LEOX_elpt860: " /* Monitor Command Prompt	*/
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#  define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#  define CFG_CBSIZE	 256		/* Console I/O Buffer Size	*/
+#  define CONFIG_SYS_CBSIZE	 256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	  16		/* max number of command args	*/
-#define CFG_BARGSIZE	  CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	  16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	  CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * Environment Variables and Storages
@@ -142,7 +142,7 @@
 #define CONFIG_ENV_IS_IN_FLASH	1      /* Environment is in FLASH	*/
 
 #define CONFIG_BAUDRATE		9600   /* console baudrate = 9600 bps	*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_ETHADDR		00:01:77:00:60:40
 #define CONFIG_IPADDR		192.168.0.30
@@ -160,58 +160,58 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x02000000
-#define CFG_NVRAM_BASE		0x03000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x02000000
+#define CONFIG_SYS_NVRAM_BASE		0x03000000
 
 #if defined(CONFIG_ENV_IS_IN_FLASH)
 #  if defined(DEBUG)
-#    define CFG_MONITOR_LEN	(320 << 10)  /* Reserve 320 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(320 << 10)  /* Reserve 320 kB for Monitor  */
 #  else
-#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
 #  endif
 #else
 #  if defined(DEBUG)
-#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
 #  else
-#    define CFG_MONITOR_LEN	(192 << 10)  /* Reserve 192 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(192 << 10)  /* Reserve 192 kB for Monitor  */
 #  endif
 #endif
 
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)  /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)  /* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)    /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)    /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	     */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	     */
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)   */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)   */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)   */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)   */
 
 #if defined(CONFIG_ENV_IS_IN_FLASH)
 #  define CONFIG_ENV_OFFSET	0x10000 /* Offset   of Environment Sector    */
@@ -221,22 +221,22 @@
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	CFG_NVRAM_BASE /* Base address of NVRAM area */
-#define CFG_NVRAM_SIZE		((128*1024)-8) /* clock regs resident in the */
+#define CONFIG_SYS_NVRAM_BASE_ADDR	CONFIG_SYS_NVRAM_BASE /* Base address of NVRAM area */
+#define CONFIG_SYS_NVRAM_SIZE		((128*1024)-8) /* clock regs resident in the */
 					       /*   8 top NVRAM locations    */
 
 #if defined(CONFIG_ENV_IS_IN_NVRAM)
-#  define CONFIG_ENV_ADDR		CFG_NVRAM_BASE /* Base address of NVRAM area */
+#  define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE /* Base address of NVRAM area */
 #  define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector  */
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		     */
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		     */
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	 4	/* log base 2 of the above value     */
+#  define CONFIG_SYS_CACHELINE_SHIFT	 4	/* log base 2 of the above value     */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -246,10 +246,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI | SYPCR_SWP)
 #else
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
 						   SYPCR_SWP)
 #endif
 
@@ -258,14 +258,14 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
@@ -273,14 +273,14 @@
  * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC
  *  enabled
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -288,7 +288,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -297,7 +297,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	 SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -308,9 +308,9 @@
  *
  */
 #ifdef DEBUG
-#  define CFG_DER		0xFFE7400F	/* Debug Enable Register */
+#  define CONFIG_SYS_DER		0xFFE7400F	/* Debug Enable Register */
 #else
-#  define CFG_DER		0
+#  define CONFIG_SYS_DER		0
 #endif
 
 /*
@@ -320,68 +320,68 @@
  * BR0 and OR0 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	  */
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	  */
 
 /* used to re-map FLASH both when starting from SRAM or FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_PRELIM_OR_AM	0xFF000000	/* 16 MB between each CSx */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF000000	/* 16 MB between each CSx */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0	  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR1 and OR1 (SDRAM)
  *
  */
-#define SDRAM_BASE1_PRELIM	CFG_SDRAM_BASE	/* SDRAM bank #0	*/
+#define SDRAM_BASE1_PRELIM	CONFIG_SYS_SDRAM_BASE	/* SDRAM bank #0	*/
 #define SDRAM_MAX_SIZE		0x02000000	/* 32 MB MAX for CS1	*/
 
 /* SDRAM timing:							*/
-#define CFG_OR_TIMING_SDRAM	0x00000000
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000000
 
-#define CFG_OR1_PRELIM	((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	((2 * CONFIG_SYS_PRELIM_OR_AM) | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR2 and OR2 (NVRAM)
  *
  */
-#define NVRAM_BASE1_PRELIM	CFG_NVRAM_BASE	/* NVRAM bank #0	*/
+#define NVRAM_BASE1_PRELIM	CONFIG_SYS_NVRAM_BASE	/* NVRAM bank #0	*/
 #define NVRAM_MAX_SIZE		0x00020000	/* 128 KB MAX for CS2	*/
 
-#define CFG_OR2_PRELIM		0xFFF80160
-#define CFG_BR2_PRELIM	((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR2_PRELIM		0xFFF80160
+#define CONFIG_SYS_BR2_PRELIM	((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		97     /* start with divider for 100 MHz */
+#define CONFIG_SYS_MAMR_PTA		97     /* start with divider for 100 MHz */
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16	  /* setting for 2 banks */
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32	  /* setting for 1 bank	 */
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16	  /* setting for 2 banks */
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32	  /* setting for 1 bank	 */
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit	 */
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8	  /* setting for 2 banks */
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16	  /* setting for 1 bank	 */
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8	  /* setting for 2 banks */
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16	  /* setting for 1 bank	 */
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)